Search results for "Nuclear engineering"
showing 10 items of 533 documents
Experimental testing of phase change materials in a warm-summer humid continental climate
2019
Abstract The construction industry (and buildings) is one of the largest energy consuming and CO2 emitting sectors in the world. To counter this, more lightweight structures are being used and energy saving applications are being developed. Phase change materials (PCM) are materials that can be considered to tackle these new challenges. It has been proven that PCMs can be passively used to improve the thermal mass of lightweight structures, which improves thermal comfort and reduces peak cooling and heating loads and therefore provides energy savings. To use these materials in an active way, they should be used together with ventilation, cooling or heating equipment, and collectors to accum…
Carbon Nanotubes Dispersion Assessment in Nanocomposites by Means of a Pulsed Thermographic Approach
2020
The extensive production of polymer composites reinforced by carbon nanotube is limited by the absence of non-destructive evaluation (NDE) methods capable of assessing product quality to guarantee compliance with specifications. It is well known that the level of dispersion of carbon nanotubes (CNTs) in the polymer matrix is the parameter that, much more than others, can influence their enhancement capabilities. Here an active Infrared Thermography Non Destructive Testing(IR-NDT) inspection, joined with pulsed phase thermography (PPT), were applied for the first time to epoxy-CNT composites to evaluate the level of dispersion of the nanoparticles. The PPT approach was tested on three groups…
Statistical Properties of Double Hoyt Fading With Applications to the Performance Analysis of Wireless Communication Systems
2018
In this paper, we investigate the statistical properties of double Hoyt fading channels, where the overall received signal is determined by the product of two statistically independent but not necessarily identically distributed single Hoyt processes. Finite-range integral expressions are first derived for the probability density function (PDF), cumulative distribution function (CDF), level-crossing rate (LCR), and average duration of fades of the envelope fading process. A closed-form approximate solution is also deduced for the LCR by making use of the Laplace approximation theorem. Applying the derived PDF of the double Hoyt channel, we then provide analytical expressions for the average…
A setup to develop novel Chemical Isobaric SEparation (CISE)
2020
Abstract Gas catchers are widely used to thermalize nuclear reaction products and subsequently extract them for precision measurements. However, impurities in the inert stopping gas can chemically react with the ions and thus influence the extraction efficiency. So far, chemical reactions in the gas-catcher have not been investigated in detail. Therefore, we are currently building a new setup to develop Chemical Isobaric SEparation (CISE) with the aim to understand the chemistry inside the gas-catcher and to explore its potential as a new technique for separation of isobars. In this paper, we give a short description of the setup together with the ion transportation studies performed via io…
A mathematical model for the prediction of the injected mass diagram of a S.I. engine gas injector
2013
A mathematical model of gaseous fuel solenoid injector for spark ignition engine has been realized and validated through experimental data. The gas injector was studied with particular reference to the complex needle motion during the opening and closing phases, which strongly affects the amount of fuel injected. As is known, in fact, when the injector nozzle is widely open, the mass flow depends only on the fluid pressure and temperature upstream the injector: this allows one to control the injected fuel mass acting on the “injection time” (the period during which the injector solenoid is energized). This makes the correlation between the injected fuel mass and the injection time linear, e…
A Finite Difference Model of a PV-PCM System
2012
Abstract The performances of a photovoltaic panel (PV) are defined according to the “peak power” that identifies the maximum electric power supplied by the panel when it receives an insolation of 1 kW/m2 and the temperature of the cell is maintained at 25 °C. These conditions are only nominal since the solar radiation has a variable intensity and also the panel is subjected to thermal excursions; due to these reasons the real power efficiency of the panel is considerably lower than that obtainable in the nominal conditions. The study focused on assessing a method to reduce the peak temperatures of PV systems using Phase Change Materials (PCM). To this aim it was created a numerical model ca…
Current modulation induced stability in laser diode under high optical feedback strength
2021
The back-reflection of emitted laser beam (optical feedback, also know as selfmixing) from various external interfaces are sufficient to cause instability, and prohibiting its use in various fields such as communication, spectroscopy, imaging to name a few. So it is desirable to study the laser dynamics and the conditions causing it to be stable in spite of strong optical feedback. With the aid of mathematical formulation, simulation and backed by experimental evidences, it is demonstrated that the frequency deviation of the laser emission due to current (intensity) modulation alters the dynamic state and boundary conditions of the system such that even under large optical feedback strength…
Monte Carlo evaluation of kerma in an HDR brachytherapy bunker
2004
In recent years, the use of high dose rate (HDR) after-loader machines has greatly increased due to the shift from traditional Cs-137/Ir-192 low dose rate (LDR) to HDR brachytherapy. The method used to calculate the required concrete and, where appropriate, lead shielding in the door is based on analytical methods provided by documents published by the ICRP, the IAEA and the NCRP. The purpose of this study is to perform a more realistic kerma evaluation at the entrance maze door of an HDR bunker using the Monte Carlo code GEANT4. The Monte Carlo results were validated experimentally. The spectrum at the maze entrance door, obtained with Monte Carlo, has an average energy of about 110 keV, m…
An Overview of 5G Slicing Operational Business Models for Internet of Vehicles, Maritime IoT Applications and Connectivity Solutions
2021
Identification of ecosystems and Business Models (BM) is an important starting point for new complex system development. The definition of actor (or stakeholder) roles and their interactions (at both business and technical levels), together with target scenarios and use cases, provide essential input information for further system requirement collection and architecture specification. The powerful and flexible Fifth Generation (5G) network slicing technology, which is capable of creating virtually isolated and logically parallel networks, enables a large range of complex services and vertical applications. Although various terminologies and models have been proposed in recent years for BMs …
Status of HIGISOL a new version equipped with SPIG and electric field guidance
2001
A new HIGISOL chamber devoted to the study of short-lived products from heavy-ion-induced fusion-evaporation reactions is proposed. It enables, via the extraction of ions by means of a SPIG (SextuPole rf Ion Guide), to improve the mass resolving power by a factor 2.5 compared to the previous system using a skimmer-ring assembly. The gas cell was also equiped with an electric field for faster transportation of recoiling ions to the nozzle where they are ejected with the gas jet. The first results obtained both with a radioactive α-source and cyclotron beam will be reported.