Search results for "Nuclear engineering"
showing 10 items of 533 documents
Technical note: Dosimetric study of a new Co-60 source used in brachytherapy
2007
The purpose of this study is to obtain the dosimetric parameters of a new Co-60 source used in high dose rate brachytherapy and manufactured by BEBIG (Eckert & Ziegler BEBIG GmbH, Germany). The Monte Carlo method has been used to obtain the dose rate distribution in the updated TG-43U1 formalism of the American Association of Physicists in Medicine. In addition, to aid the quality control process on treatment planning systems (TPS), a two-dimensional rectangular dose rate table, coherent with the TG-43U1 dose calculation formalism, is given. These dosimetric data sets can be used as input data of the TPS calculations and to validate them.
Implementation of dosimetry equipment and phantoms at the MedAustron light ion beam therapy facility
2017
Purpose: To describe the implementation of dosimetry equipment and phantoms into clinical practice of light ion beam therapy facilities. This work covers standard dosimetry equipment such as computerized water scanners, films, 2D-array, thimble and plane parallel ionization chambers, but also dosimetry equipment specifically devoted to the pencil beam scanning delivery technique such as water columns, scintillating screens or multi-layer ionization chambers. Method: Advanced acceptance testing procedures developed at MedAustron and complementary to the standard acceptance procedures proposed by the manufacturer are presented. Detailed commissioning plans have been implemented for each piece…
A Monte Carlo-aided design of a modular 241Am-Be neutron irradiator
2013
Monte Carlo studies aimed at designing a modular 241Am-Be neutron irradiator for testing neutron detectors and personal dosimeters and processing large volume samples are reported in this study. The evaluation of the shapes and thicknesses of the moderator and shielding materials was carried out by a MCNP5 Monte Carlo simulation code. The reliability of the simulation was experimentally verified by the activation of gold foils and TLD dosimeter measurements in an irradiation cell placed at the center of the test configuration.
A new resonant Laser-SNMS system for environmental ultra-trace analysis: Installation and optimization
2017
Abstract Localization, analysis and mobility of radioactive contaminated particles is of major concern for assessment of contamination threads and nuclear forensics. For this purpose, a new resonant Laser-SNMS system was developed and set up at the Institute for Radioecology and Radiation Protection for spatially resolved ultra-trace analysis of low concentrated radionuclides directly on environmental samples. This paper describes the adaption and combination of a dedicated Ti:sapphire laser system with a commercial TOF-SIMS instrument for resonant Laser-SNMS. The project includes computer simulations for optimization of the TOF analyzer. Results on synthetic uranium and technetium samples …
Testing the Dispersion of Nanoparticles in a Nanocomposite with an Ultra-Low Fill Content Using a Novel Non-Destructive Evaluation Technique
2022
A non-destructive evaluation (NDE) technique capable of testing the dispersion of nanoparticles in a nanocomposite would be of great use to the industry to check the quality of the products made and to ensure compliance with their specifications. Very few NDE techniques found in the literature can evaluate the level of dispersion of the nanoparticles in the whole nanocomposite. Here, a recently developed NDE technique based on pulsed phase thermography (PPT) in transmission mode was used to assess the particle dispersion in ultra-low, less than 0.05 wt%, Ag enriched polymeric based nanocomposite manufactured with an innovative nano-coating fragmentation technique. The phasegrams obtained wi…
Scanning Tunneling Spectroscope Use in Electrocatalysis Testing
2010
Published version of an article from the journal: Materials (1996-1944). Also available from publisher: http://dx.doi.org/10.3390/ma3063675 The relationship between the electrocatalytic properties of an electrode and its ability to transfer electrons between the electrode and a metallic tip in a scanning tunneling microscope (STM) is investigated. The alkaline oxygen evolution reaction (OER) was used as a test reaction with four different metallic glasses, Ni78Si8B14, Ni70Mo20Si5B5, Ni58Co20Si10B12, and Ni25Co50Si15B10, as electrodes. The electrocatalytic properties of the electrodes were determined. The electrode surfaces were then investigated with an STM. A clear relationship between the…
From 1D coordination polymers to Metal Organic Frameworks by the use of 2-pyridyl oximes.
2020
The synthesis and characterization of coordination polymers and metal&ndash
An EEMD Aided Comparison of Time Histories and Its Application in Vehicle Safety
2017
In the context of signal processing, the comparison of time histories is required for different purposes, especially for the model validation of vehicle safety. Most of the existing metrics focus on the mathematical value only. Therefore, they suffer the measuring errors, disturbance, and uncertainties and can hardly achieve a stable result with a clear physical interpretation. This paper proposes a novel scheme of time histories comparison to be used in vehicle safety analysis. More specifically, each signal for comparison is decomposed into a trend signal and several intrinsic mode functions (IMFs) by ensemble empirical mode decomposition. The trend signals reflect the general variation a…
In Vitro Study on Bone Heating during Drilling of the Implant Site: Material, Design and Wear of the Surgical Drill
2020
Objective: An in vitro study was made to compare mean thermal variation according to the material, design and wear of the surgical drills used during dental implant site preparation. Material and methods: Three study groups (stainless steel drills with straight blades
Structural and optical characterization of ZnS ultrathin films prepared by low-temperature ALD from diethylzinc and 1.5-pentanedithiol after various …
2019
The structural and optical evolution of the ZnS thin films prepared by atomic layer deposition (ALD) from the diethylzinc (DEZ) and 1,5-pentanedithiol (PDT) as zinc and sulfur precursors was studied. A deposited ZnS layer (of about 60 nm) is amorphous, with a significant S excess. After annealing, the stoichiometry improved for annealing temperatures &ge