Search results for "Number"
showing 10 items of 3939 documents
Experimental application of digital image correlation for the tensile characterization of basalt FRCM composites
2021
Abstract Composites made with inorganic matrix, namely fabric reinforced cementitious mortar (FRCM) composites are becoming widespread as strengthening materials for existing masonry structures. These composites are made of a dry grid of fibres embedded in an inorganic matrix. FRCMs can be considered a valid alternative to traditional organic composites such as fibre reinforced polymers (FRPs) because of their better compatibility with the masonry support. This work presents an experimental study for the tensile characterization of a basalt fabric reinforced cementitious mortar (BFRCM) composite. Tensile tests were carried out on coupons reinforced with one, two or three layers of grid to i…
2020
Epoxy resin plays a key role in composite matrices and DGEBA is the major precursor used. With the aim of favouring the use of bio resources, epoxy resins can be prepared from lignin. In particular, diglycidyl ether of isoeugenol derivatives are good candidates for the replacement of DGEBA. This article presents an effective and eco-friendly way to prepare epoxy resin derived from isoeugenol (BioIgenox), making its upscale possible. BioIgenox has been totally characterized by NMR, FTIR, MS and elemental analyses. Curing of BioIgenox and camphoric anhydride with varying epoxide function/anhydride molar ratios has allowed determining an optimum ratio near 1/0.9 based on DMA and DSC analyses a…
Simulations of non-spherical particles suspended in a shear flow
2000
The lattice-Boltzmann method was used to investigate the effects of the shape and concentration of the particles on the rheological properties of non-Brownian suspensions for non-zero Reynolds numbers. Several case studies were analyzed and the methods used were found to give accurate predictions for these systems. The viscosity of suspensions of both spherical and non-spherical particles was determined as functions of shear rate and concentration of particles. It was shown that, for high shear rates, shear thickening appears. This phenomenon is particularly pronounced for particles of irregular shape.
Flow resistance law under equilibrium bed-load transport conditions
2018
Abstract The uniform flow resistance equation, in the form due to Manning or Darcy-Weisbach, is often applied to determine the stage-discharge relationship of a river cross-section. The application of this equation, namely the slope-area method, allows to indirectly measure by water level readings the corresponding river discharge. In this paper, a recently deduced flow resistance equation for open channel flow was tested during conditions of equilibrium bed-load transport. First the flow resistance equation was determined by dimensional analysis and applying the condition of incomplete self-similarity for the flow velocity profile. Then the analysis was developed by the following steps: (i…
Testing a theoretical resistance law for overland flow under simulated rainfall with different types of vegetation
2020
Abstract In this paper a recently theoretically deduced flow resistance equation, based on a power-velocity profile, was tested using data collected for overland flow under simulated rainfall carried out in plots with vegetation. The available data were obtained exploring a wide range of rainfall intensities (from 60 to 181 mm h−1) and slopes (from 3.6 to 39.6%), and with four different types of vegetation. The database, including measurements of flow velocity, water depth, cross sectional flow area, wetted perimeter and bed slope, was divided in four datasets (one for each vegetation type), which allowed the calibration of the relationship between the velocity profile parameter Γ, the slop…
Assessing an overland flow resistance approach under equilibrium sediment transport conditions
2021
Abstract In this study, for the first time, a theoretically deduced flow resistance equation was tested for an overland flow under equilibrium sediment transport conditions using available experimental data by Liu et al. for five Chinese soils. Initially the relationship among the velocity profile parameter Γ, the channel slope, the flow Reynolds number, the Froude number and the sediment concentration was calibrated using 90 measurements of the available database (Loessial, Cinnamon and Black soil) and tested by other 60 measurements (Red and Purple soil). The results proved that the Darcy–Weisbach friction factor can be accurately estimated by the proposed theoretical approach, with error…
Assessing flow resistance in gravel bed channels by dimensional analysis and self-similarity
2018
Abstract In this paper a new flow resistance equation for open channel flow, based on the integration of a power velocity profile, was tested for gravel bed channels. First this flow resistance equation, theoretically deduced by dimensional analysis and incomplete self-similarity condition, was reported. Then a relationship between the Γ function of the velocity profile, the channel slope and the Froude number was calibrated by the available laboratory measurements of flow velocity, water depth and bed slope carried out in 416 flume experimental runs with a gravel bed. Then the relationship for estimating Γ function and the theoretical resistance equation was tested by 83 independent flume …
Experimental study of boulder concentration effect on flow resistance in gravel bed channels
2021
Abstract Previous studies demonstrated that for open channel flows the power velocity profile can be integrated to obtain the flow resistance law. In this paper the relationship between Γ coefficient of the power velocity distribution, the channel slope and Froude number (Eq. (9) ) is firstly presented. Then the measurements carried out in a laboratory flume covered by hemispheric elements for two different hydraulic conditions (partially inundated and inundated) are used to calibrate this relationship. These elements are placed with a square arrangement and have a concentration range 4–64%. For the two investigated hydraulic conditions, this analysis demonstrates that the relationship to e…
Evaluating the Effects of Sediment Transport on Pipe Flow Resistance
2021
In this paper, the applicability of a theoretical flow resistance law to sediment-laden flow in pipes is tested. At first, the incomplete self-similarity (ISS) theory is applied to deduce the velocity profile and the corresponding flow resistance law. Then the available database of measurements carried out by clear water and sediment-laden flows with sediments having a quasi-uniform sediment size and three different values of the mean particle diameter Dm (0.88 mm, 0.41 mm and 0.30 mm) are used to calibrate the Γ parameter of the power-velocity profile. The fitting of the measured local velocity to the power distribution demonstrates that (i) for clear flow the exponent δ can be estimated b…
Testing a theoretically-based overland flow resistance law by Emmett’s database
2021
Abstract The main aim of this paper was to test a recently theoretically deduced flow resistance equation, based on a power-velocity profile, using a wide database of available measurements carried out in laboratory and field experimental runs with overland flow under simulated rainfall. In comparison with previous calibrations and validations of this theoretically deduced flow resistance equation, the used database by Emmett is characterized by a wide range of rainfall intensities (from 79.2 to 303.5 mm h−1 for laboratory runs and from 178.3 to 215.9 mm h−1 for field investigations) and bed slopes (from 0.33 to 17% for laboratory runs and from 2.9 to 33.2% for field investigations). For th…