Search results for "O2"
showing 10 items of 1115 documents
Structural and Optical Properties of Novel Surfactant Coated TiO2Ag Based Nanoparticles
2010
Stable dispersions of surfactant-coated TiO2–Ag based nanoparticles in apolar medium have been prepared by performing sequentially the hydrolysis of titanium(IV) isopropoxide and the reduction of Ag? in the confined space of sodium bis(2-ethylhexyl)sulfosuccinate (NaAOT) reverse micelles. Depending on the sequence length, this novel procedure allowed the synthesis of semiconductor–metal nanoparticles, nominally indicated as TiO2/Ag, TiO2/Ag/TiO2, and TiO2/Ag/TiO2/ Ag, stabilized by a monolayer of oriented surfactant molecules. The structural characterization of these nanoparticles has been performed by High Resolution Transmission Electron Microscopy (HR-TEM), while optical properties were …
Resistive switching in microscale anodic titanium dioxide-based memristors
2018
Licence CC BY-NC-ND The potentiality of anodic TiO2 as an oxide material for the realization of resistive switching memory cells has been explored in this paper. Cu/anodic-TiO2/Ti memristors of different sizes, ranging from 1 × 1 μm2 to 10 × 10 μm2 have been fabricated and characterized. The oxide films were grown by anodizing Ti films, using three different process conditions. Measured IV curves have shown similar asymmetric bipolar hysteresis behaviors in all the tested devices, with a gradual switching from the high resistance state to the low resistance state and vice versa, and a R_OFF/R_ON ratio of 80 for the thickest oxide film devices.
Oxide-based nanomaterials for fuel cell catalysis:the interplay between supported single Pt atoms and particles
2017
The concept of single atom catalysis offers maximum noble metal efficiency for the development of low-cost catalytic materials. Among possible applications are catalytic materials for proton exchange membrane fuel cells. In the present review, recent efforts towards the fabrication of single atom catalysts on nanostructured ceria and their reactivity are discussed in the prospect of their employment as anode catalysts. The remarkable performance and the durability of the ceria-based anode catalysts with ultra-low Pt loading result from the interplay between two states associated with supported atomically dispersed Pt and sub-nanometer Pt particles. The occurrence of these two states is a co…
Insight into the defect-molecule interaction through the molecular-like photoluminescence of SiO2 nanoparticles
2016
Luminescence properties due to surface defects in SiO2 are the main keystone with particles that have nanoscale dimensions, thus motivating their investigation for many emission related applications in the last few decades. A critical issue is the role played by the atmosphere that, by quenching mechanisms, weakens both the efficiency and stability of the defects. A deep knowledge of these factors is mandatory in order to properly limit any detrimental effects and, ultimately, to offer new advantageous possibilities for their exploitation. Up to now, quenching effects have been interpreted as general defect conversion processes due to the difficulty in disentangling the emission kinetics by…
Qualitative Models for the Photoresponse and Capacitance of Annealed Titania Nanotubes
2015
Physicochemical characterization of annealed TiO2 nanotubes (TNTs) was conducted by using photocurrent spectroscopy and differential capacitance techniques. It has been shown that the geometry and architecture of nanotubes determine how photogenerated electrons and holes are separated and transferred. Photocurrent generation in TNTs is a consequence of two phenomena; drifting of holes into the electrolyte and diffusion of electrons toward the substrate. These two processes have been shown to be independent of the anodic polarization. The capacitance of TiO2 nanotubes is also affected by their geometry. In anodic potentials, with respect to the flat band potential of the underlying barrier l…
Pickering Emulsions of Fluorinated TiO2: A New Route for Intensification of Photocatalytic Degradation of Nitrobenzene
2020
International audience; Fluorination of the TiO2 surface has been often reported as a tool to increase the photocatalytic efficiency due to the beneficial effects in terms of production of oxidizing radicals. Moreover, it is shown that the unique amphiphilic properties of the fluorinated TiO2 (TiO2-F) surface allow one to use this material as a stabilizer for the formulation of Pickering emulsions of poorly soluble pollutants such as nitrobenzene (NB) in water. The emulsions have been characterized in terms of size of the droplets, type of emulsion, possibility of phase inversion, contact angle measurements, and optical microscopy. The emulsified system presents micrometer-sized droplets of…
Co3O4 particles grown over nanocrystalline CeO2: influence of precipitation agents and calcination temperature on the catalytic activity for methane …
2015
Crystalline cobalt oxides were prepared by a precipitation method using three different precipitation agents, (NH4)(2)CO3, Na2CO3 and CO(NH2)(2). Cobalt oxide nanoparticles corresponding to a Co3O4 loading of 30 wt% were also deposited over high-surface area nanocrystalline ceria by the same precipitation agents. The effect of calcination temperature, 350 or 650 degrees C, on the morphological and structural properties was evaluated. Characterization by BET, XRD, SEM, TEM, Raman spectroscopy, H-2-TPR, XPS and NH3-TPD was performed and the catalytic properties were explored in the methane oxidation reaction. The nature of the precipitation agent strongly influenced the textural properties of…
Photocatalytic CO2 reduction in gas–solid regime in the presence of H2O by using GaP/TiO2 composite as photocatalyst under simulated solar light
2014
GaP/TiO2 composites exhibited a remarkable photocatalytic activity for CO2 reduction in the presence of water vapor producing methane. By decreasing the GaP:TiO2 mass ratio an increase in the photocatalytic activity of the composite was observed for up to a 1:10 mass ratio. The photocatalytic activity of the composite can be attributed to the band structures of the solids as well as to the efficient charge transfer between GaP and TiO2 heterojunction.
Electronic Properties of Thermal Oxides on Ti and Their Influence on Impedance and Photoelectrochemical Behavior of TiO2 Nanotubes
2017
Thermal oxidation of titaniumwas carried out at 350◦C, 450◦C, and 550◦C for 2 h or 12 h.X-rayDiffraction and Raman Spectroscopy suggest that the thermal oxides are scarcely crystallinewhen the annealing temperature is low, while both anatase and rutile are present for high annealing temperature and time. Photoelectrochemical measurements allowed estimation of a bandgap decreasing from 3.35 eV to 3.15 eV with increasing annealing temperature. The impedance spectra confirmed the formation of n-type semiconductors, with an impedance strongly decreasing on going from a reverse bias toward a forward bias regime. TiO2 nanotubes grown by anodizing Ti in NH4F and water containing ethylene glycol so…
Tensile strength and impact strength of color modified acrylic resin reinforced with titanium dioxide nanoparticles
2017
Background Poor mechanical properties are among the main limitations of acrylic resins. Addition of titanium dioxide (TiO2) nanoparticles to acrylic resin has been shown to improve its mechanical properties with an adverse effect on its color. Thus, this study sought to assess the tensile and impact strength of a color modified heat cure acrylic resin reinforced with TiO2 nanoparticles. Material and Methods In this in vitroexperimental study, 1wt% TiO2 nanoparticles were added to SR Triplex Hot heat-cure acrylic resin powder and mixed. Pigments and color fibers were also added and 18 samples were fabricated of this paste for tensile and impact strength testing (n=9) according to ISO5271. Ei…