Search results for "OAD"
showing 10 items of 3121 documents
Anti-swing control of a hydraulic loader crane with a hanging load
2021
Abstract In this paper, anti-swing control for a hydraulic loader crane is presented. The difference between hydraulic and electric cranes are discussed to show the challenges associated with hydraulic actuation. The hanging load dynamics and relevant kinematics of the crane are derived to create the 2-DOF anti-swing controller. The anti-swing controller is added to the electro-hydraulic motion controller via feedforward. A dynamic simulation model of the crane is made, and the control system is evaluated in simulations with a path controller in actuator space. Simulation results show significant reduction in the load swing angle during motion. Experiments are carried out to verify the perf…
Dynamic Modeling of Planar Multi-Link Flexible Manipulators
2021
A closed-form dynamic model of the planar multi-link flexible manipulator is presented. The assumed modes method is used with the Lagrangian formulation to obtain the dynamic equations of motion. Explicit equations of motion are derived for a three-link case assuming two modes of vibration for each link. The eigenvalue problem associated with the mass boundary conditions, which changes with the robot configuration and payload, is discussed. The time-domain simulation results and frequency-domain analysis of the dynamic model are presented to show the validity of the theoretical derivation.
A Self-Contained Electro-Hydraulic Cylinder with Passive Load-Holding Capability
2019
Self-contained electro-hydraulic cylinders have the potential to replace both conventional hydraulic systems and the electro-mechanical counterparts enhancing energy efficiency, plug-and-play installation, and reduced maintenance. Current commercial solutions of this technology are limited and typically tailor-made, whereas the research emphasis is primarily on cost efficiency and power applications below five [kW]. Therefore, there is the need of developing more flexible systems adaptable to multiple applications. This research paper offers a contribution in this regard. It presents an electro-hydraulic self-contained single-rod cylinder with passive load-holding capability, sealed tank, c…
A Comparison Study of a Novel Self-Contained Electro-Hydraulic Cylinder versus a Conventional Valve-Controlled Actuator—Part 2: Energy Efficiency
2019
This research paper presents the second part of a comparative analysis of a novel self-contained electro-hydraulic cylinder with passive load-holding capability against a state of the art, valve-controlled hydraulic system that is typically used in load-carrying applications. After addressing the control design and motion performance in the first part of the study, the comparison is now focused on the systems&rsquo
A Novel Solution for the Elimination of Mode Switching in Pump-Controlled Single-Rod Cylinders
2020
This paper concerns the stability issue of pump-controlled single-rod cylinders, known as mode switching. First, a review of the topic is provided. Thereafter, the most recently proposed solution for the elimination of mode switching is investigated and shown to result in unstable behavior under certain operating conditions. A theoretical analysis is provided demonstrating the underlying mechanisms of this behavior. Based on the analysis, a novel control strategy is proposed and investigated numerically. Proper operation and stability are demonstrated for a wide range of operating conditions, including situations under which the most recently proposed solution results in unstable behavior a…
A Comparison Study of a Novel Self-Contained Electro-Hydraulic Cylinder versus a Conventional Valve-Controlled Actuator—Part 1: Motion Control
2019
This research paper presents the first part of a comparative analysis of a novel self-contained electro-hydraulic cylinder with passive load-holding capability against a state of the art, valve-controlled actuation system that is typically used in load-carrying applications. The study is carried out on a single-boom crane with focus on the control design and motion performance analysis. First, a model-based design approach is carried out to derive the control parameters for both actuation systems using experimentally validated models. The linear analysis shows that the new drive system has higher gain margin, allowing a considerably more aggressive closed-loop position controller. Several b…
Physical Load Among Construction Workers and Analysis with Objective Ergonomics Research Method
2016
There is growing number of work related musculoskeletal disorders among workers in construction industry. Employees in construction professions admit physical load and discomfort in various body parts after the work. Accordingly to Eurostat statistical data 60 % of total work related diseases are attributed to musculoskeletal disorders in Latvia. The aim of this study was to determine physical load of construction auxiliary workers and bricklayers using objective ergonomics research method HR monitoring and subjective ergonomic risk assessment methods. The research involved full time 8 auxiliary construction workers and 7 bricklayers. Analysis of the heart rate monitoring data proved that o…
Flexible integration of robotics, ultrasonics and metrology for the inspection of aerospace components
2016
The performance of modern robotic manipulators has allowed research in recent years, for the development of fast automated non-destructive testing (NDT) of complex geometries. Contemporary robots are well suited for their accuracy and flexibility when adapting to new tasks. Several robotic inspection prototype systems and a number of commercial products have been created around the world. This paper describes the latest progress of a new phase of the research applied to a composite aerospace component of size 1 by 3 metres. A multi robot flexible inspection cell was used to take the fundamental research and the feasibility studies to higher technology readiness levels, all set for future in…
Identification and control design for path tracking of hydraulic loader crane
2017
The controlled operation of hydraulic machines with multiple degrees of freedom is challenging due to complex nonlinear dynamics of cylinder actuators, in addition to multibody dynamics like in the case of hydraulic manipulators. This paper addresses the system identification and control design for path tracking of a standard hydraulic loader crane. The kinematics of the crane is solved for operation in the vertical plane and generation of trajectories for the tool tip to be followed. A frequency response measurements and analysis have been done for dynamics modeling of both hydraulic cylinders actuating main boom and jib. The static dead-zone type input non-linearity has been identified an…
A Geometrical Approach for Vision Based Attitude and Altitude Estimation for UAVs in Dark Environments
2012
International audience; This paper presents a single camera and laser system dedicated to the realtime estimation of attitude and altitude for unmanned aerial vehicles (UAV) under low illumination conditions to dark environments. The fisheye camera allows to cover a large field of view (FOV). The approach, close to structured light systems, uses the geometrical information obtained by the projection of a laser circle onto the ground plane and perceived by the camera. We propose some experiments based on simulated data and real sequences. The results show good agreement with the ground truth values from the commercial sensors in terms of its accuracy and correctness. The results also prove i…