Search results for "OEL"

Tetragonal tungsten bronzes Nb8−xW9+xO47−δ: optimization strategies and transport properties of a new n-type thermoelectric oxide

2015

Engineering of nanoscaled structures may help controlling the electrical and thermal transport in solids, in particular for thermoelectric applications that require the combination of low thermal conductivity and low electrical resistivity. The tetragonal tungsten bronzes Nb8−xW9+xO47 (TTB) allow a continuous variation of the charge carrier concentration while fulfilling at the same time the concept of a “phonon-glass electron-crystal” through a layered nanostructure defined by intrinsic crystallographic shear planes. The thermoelectric properties of the tetragonal tungsten bronzes Nb8−xW9+xO47−δ (0 < x < 2) were studied in the temperature range from 373 to 973 K. Structural defects and the…

Review: Electrostatically actuated nanobeam-based nanoelectromechanical switches – materials solutions and operational conditions

2018

This review summarizes relevant research in the field of electrostatically actuated nanobeam-based nanoelectromechanical (NEM) switches. The main switch architectures and structural elements are briefly described and compared. Investigation methods that allow for exploring coupled electromechanical interactions as well as studies of mechanically or electrically induced effects are covered. An examination of the complex nanocontact behaviour during various stages of the switching cycle is provided. The choice of the switching element and the electrode is addressed from the materials perspective, detailing the benefits and drawbacks for each. An overview of experimentally demonstrated NEM swi…

Metal-nanoparticle-G4-DNA conjugates and their DC conductivity measurements

2013

Due to superior self-assembly properties, DNA is a very promising candidate for the basis of future bottom-up solutions for molecular electronics and therefore the conductivity of DNA is a very crucial question. In this work DC conductivity measurements on conjugates consisting of G-quadruplex DNA and metal nanoparticles were carried out. The fabrication and results obtained from the electrical measurements of three types of conjugates (20nm G4-AgNP chains, 20nm G4-AuNP flowers and 60nm G4-AuNPs) are reported. Additionally, 20nm AuNP chains coated with G4 were fabricated but not measured electrically. Results reported here indicate that in ambient conditions G4-DNA exhibits insulating behav…

Intelligent papers

2006

Nanoscale mechanical characterization of polymers by atomic force microscopy (AFM) nanoindentations: Viscoelastic characterization on a model material

2009

The Atomic Force Microscope (AFM), apart form its conventional use as a microscope, is also used for the characterization of the local mechanical properties of polymers. In fact, the elastic characterization of purely elastic materials using this instrument can be considered as a well assessed technique while the challenge remains the characterization of the viscoelastic mechanical properties. In particular, one finds the mechanical behavior changing when performing indentations at different loading rates, i.e., on different time scales. Moreover, this apparent viscoelastic behavior can also be due to complex contact mechanics phenomena, with the onset of plasticity and long-term viscoelast…

Surface modification of poly(ethylene-co-acrylic acid) with amino-functionalized silica nanoparticles

2011

In this work we studied the possibility to achieve a hybrid-surface through the modification, via a facile wet chemical process, of the surface of films of poly(ethylene-co-acrylic acid) (EAA) with amino-modified silica nanoparticles. Films of EAA were preliminarily activated by the introduction of -COCl groups on their surface. Silica nanoparticles were thereafter covalently bound on the polymeric surface as confirmed by FTIR, ATR-FTIR, XPS, NMR and SEM determinations. The nanoparticles formed a multilayer on the film surface and covered almost uniformly the whole film surface. Direct measurements of superficial amino groups by titration allowed us to detect a concentration of about 18 nmo…

Optoelectronic devices based on caesium lead halide perovskite nanocrystals

2020

Tradicionalmente, la implementación de materiales activos en circuitos fotónicos integrados se ha basado en la utilización de semiconductores III-V y vidrios y materiales ferroeléctricos dopados con iones de tierras raras. Sin embargo, en la actualidad existe una alternativa basada en (nano) materiales sintetizados por técnicas de química coloidal. La posibilidad de procesar nanomateriales en solución permite fabricar semiconductores con propiedades ópticas (emisión, absorción, dispersión de luz) que pueden diseñarse durante la síntesis. Además, su naturaleza coloidal permite integrarlas en cualquier arquitectura óptica mediante sencillas técnicas de impresión en tinta. En este contexto, lo…

Latest Developments and Results of Radiation Tolerance CMOS Sensors with Small Collection Electrodes

2020

The development of radiation hard Depleted Monolithic Active Pixel Sensors (DMAPS) targets the replacement of hybrid pixel detectors to meet radiation hardness requirements of at least 1.5e16 1 MeV neq/cm2 for the HL-LHC and beyond. DMAPS were designed and tested in the TJ180 nm TowerJazz CMOS imaging technology with small electrodes pixel designs. This technology reduces costs and provides granularity of 36.4x36.4 um2 with low power operation (1 uW/pixel), low noise of ENC < 20 e-, a small collection electrode (3 um) and fast signal response within 25 ns bunch crossing. This contribution will present the latest developments after the MALTA and Mini-MALTA sensors. It will illustrate the imp…

Modelling the Electromechanical Impedance Method for the Prediction of the Biomechanical Behavior of Dental Implant Stability

2015

Abstract We propose the electromechanical impedance (EMI) technique to assess the stability of dental implants. The technique consists of bonding a piezoelectric transducer to the element to be monitored. Conventionally, electromechanical admittance is used to diagnose structural damage. In this study, we created a 3D finite element model to mimic a transducer bonded to the abutment of a dental implant placed in a host bone site. We simulated the healing after surgery by changing the Young's modulus of the bone-implant interface. The results show that as the Young's modulus of the interface increases, the electromechanical characteristic of the transducer changes.

Nutrition: Searching for the immunological basis of wheat sensitivity

2016

A new study has advanced our knowledge on the pathogenesis of noncoeliac wheat sensitivity (NCWS), implicating the activation of innate immunity markers and immunological mechanisms at the basis of NCWS. However, limitations in the design of studies performed in this field will need addressing to help identify the root cause of NCWS.