Search results for "OLED"
showing 10 items of 349 documents
Inverted Solution Processable OLEDs Using a Metal Oxide as an Electron Injection Contact.
2007
A new type of bottom-emission electroluminescent device is described in which a metal oxide is used as the electron-injecting contact. The preparation of such a device is simple. It consists of the deposition of a thin layer of a metal oxide on top of an indium tin oxide covered glass substrate, followed by the solution processing of the light-emitting layer and subsequently the deposition of a high-workfunction (air-stable) metal anode. This architecture allows for a low-cost electroluminescent device because no rigorous encapsulation is required. Electroluminescence with a high brightness reaching 5700 cd m–2 is observed at voltages as low as 8 V, demonstrating the potential of this new a…
Combined thermal evaporated and solution processed organic light emitting diodes
2011
Abstract Highly efficient, partly solution processed phosphorescent red, green and white organic light emitting diodes with small molecular weight host materials are prepared from commercially available starting compounds. Starting from an evaporated reference device, layers are stepwise replaced by solution processed layers. Replacing the evaporated hole transport layer by a solution processed polymer interlayer does not affect the performance and allows spincoating of the emissive layer after annealing of the polymer. Devices with, next to the spincoated hole injection and transport layer, a solution processed emission layer show similar characteristics and efficiencies as the reference d…
A new cross-linkable 9,10-diphenylanthracene derivative as a wide bandgap host for solution-processed organic light-emitting diodes
2018
Efficient organic light-emitting diodes (OLEDs) can be obtained using multilayered architectures where the processes of charge injection, transport and recombination are separated and optimized in each layer. Processing these structures from solution requires strategies to avoid redissolution or damage of the previously deposited layers. Several reports have demonstrated the development of cross-linkable hole transport materials, while less literature describes the synthesis and applications of such wide bandgap host materials for multilayered OLEDs. In this work we introduce a cross-linkable derivative of 9-(4-(10-phenylanthracene-9-yl)phenyl)-9H-carbazole incorporating styrene moieties (S…
Effect of conductivity of hole injection layer on the performance of a blue light emitting solution processable OLED
2005
The performance of blue emitting OLED devices, using a polyspiro as blue light emitting polymer, were studied as a function of the conductivity of a novel hybrid hole injection material. The hole injection material is based on a polyarylamine using a molecular magnet as oxidant. The charge density and the luminance of the devices changed considerably with increasing conductivity of the hole injection layer. The change in device performance can be attributed to a change from a hole limited device to a balanced charge carrier device and eventually to an electron limited device. The performance of the optimized device configuration is significantly improved with respect to a device making use …
Ionically Assisted Charge Injection in Hybrid Organic−Inorganic Light-Emitting Diodes
2010
We have developed hybrid organic−inorganic light-emitting diodes (HyLEDs) featuring a buffer layer of a conjugated polyelectrolyte (CPE) sandwiched between a light emitting polymer (LEP) film and a ZnO electron injection layer. Efficacies exceeding 5 cd/A and the possibility of employing various LEPs are demonstrated. These improvements, compared to HyLEDs without any interlayer, are attributed to the redistribution of ions in the CPE film, causing hole accumulation at the CPE/LEP interfaces and enhanced electron injection from the ZnO into the electroluminescent polymer. The intrinsic air-stability of the electrodes used in HyLEDs, together with the solution processability of the ZnO/CPE/L…
3,3'-Bicarbazole structural derivatives as charge transporting materials for use in OLED devices
2018
In this study we report novel 3,3′-bicarbazole based charge transporting materials mainly designed for a use in systems containing phosphorescent iridium (III) complex emitters. A low-cost oxidative coupling reaction using FeCl3 was employed in the synthesis of 3,3′-bicarbazole compounds. Different derivatives of 3,3′-bicarbazole with 4-ethoxyphenyland ethyl- substituents at 9,9′- positions and (2,2-diphenylhydrazono)methyl- and 4-(dimethylamino)styryl- substituents at 6,6′- positions were synthesized. Obtained (2,2-diphenylhydrazono)methyl- derivatives exhibit glass transition temperatures that are sufficient for applications in electronic devices. Thin amorphous films of good optical qual…
Pyridine-Incorporated Dihexylquaterthiophene: A Novel Blue Emitter for Organic Light Emitting Diodes (OLEDs)
2012
The synthesis and characterisation of 2,5-bis(5′-hexyl-[2,2′-bithiophen]-5-yl)pyridine (Th4PY) and its use as a blue emitter in organic light emitting diodes (OLEDs) is reported. Th4PY was synthesised in high yield using a straightforward Suzuki coupling route with commercially available starting materials. As Th4PY is both soluble and has low molecular weight, blue OLEDs were fabricated using both spin-coating and vacuum deposition thin film processing techniques to study the effect of processing on device performance. OLED devices using a spin-coated layer consisting of 4′,4′′-tris(N-carbazolyl)triphenylamine (TCTA) and 2-(4-biphenylyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (PBD) as a …
THE PHYSICAL ORIGIN OF PROTEIN DYNAMICAL TRANSITION: A LIQUID-LIQUID TRANSITION IN HYDRATION WATER?
2015
In this thesis I study, by means of neutron scattering, calorimetry, and dielectric spectroscopy, the physical origin of protein dynamical transition (PDT) which is usually observed at ~230 K in protein hydrated powders and is deemed necessary for protein function. Measurements reported in this thesis have been performed on hydrated powders of Myoglobin. The combined use of different experimental techniques gives a coherent description of the PDT and reveals a connection with a liquid-liquid crossover occurring in the protein hydration water at about the same temperature. In order to deepen our understanding of this connection and to obtain a direct experimental evidence of the existence of…
Integration of large-area optical imagers for biometric recognition and touch in displays
2021
In recent years there has been an increasing interest to integrate optical sensing in mobile displays, for instance, for biometric fingerprint scanning functionality. There are several routes to incorporate optical fingerprint functionality within the full display area, each with their own benefits and challenges. Here we investigate the different integration routes using large-area, ultra-thin imagers based on organic photodiodes.
V?9V?2 T lymphocytes activation in osteoporotic patients treated with bisphosphonates
2014
Treatment with bisphosphonates induces differentiation and activation of Vγ9Vδ2 T lymphocytes obtained from peripheral blood showing also an antitumoral effect in both in vitro and in vivo models. Aim of the present study was to determine in vivo the effect of BPs treatment in patients affected with osteoporosis on Vγ9Vδ2 T lymphocytes. We have studied Vγ9Vδ2 T lymphocytes expansion and differentiation from PBMC obtained from osteoporotic patients treated with one of the following bisphosphonates zoledronate, alendronate, neridronate or risedronate. We have found that zoledronic acid, followed by alendronate was the most effective on reducing CM population (100%) and increasing TEM and TEMR…