Search results for "ORP"

showing 10 items of 15031 documents

Refractive index controlled by film morphology and free carrier density in undoped ZnO through sol-pH variation

2018

Abstract Zinc oxide thin films, prepared by the sol-gel process, were deposited on glass substrate using spin coating technique. The sol-pH effect on the optical parameters was studied for alkaline sol. The surface roughness was investigated by atomic force microscopy (AFM) and varied from 20 to 40 nm. The optical transmission measurements were carried out to evaluate the behavior of the extinction coefficient and the refractive index. An exponential decay of the refractive index ‘n’ as a function of wavelength was observed. The refractive index increases slightly when the pH increases to pH = 9.5 where it reaches its maximum. Beyond this value, it decreases sharply. This behavior has been …

010302 applied physicsSpin coatingMaterials scienceMorphology (linguistics)Analytical chemistry02 engineering and technologySubstrate (electronics)Molar absorptivity021001 nanoscience & nanotechnology01 natural sciencesAtomic and Molecular Physics and OpticsElectronic Optical and Magnetic MaterialsWavelength0103 physical sciencesSurface roughnessElectrical and Electronic EngineeringExponential decay0210 nano-technologyRefractive indexOptik
researchProduct

Spectroscopic study of the electric field induced valence change of Fe-defect centers in SrTiO(3)

2011

The electrochemical changes induced by an electric field in Fe-doped SrTiO(3) have been investigated by X-ray absorption spectroscopy (XANES and EXAFS), electron paramagnetic resonance (EPR) and Raman spectroscopy. A detailed study of the Fe dopant in the regions around the anode and cathode reveals new insights into the local structure and valence state of Fe in SrTiO(3) single crystals. The ab initio full multiple-scattering XANES calculations give an evidence of the oxygen vacancy presence in the first coordination shell of iron. Differences in the length and disorder of the Fe-O bonds as extracted from EXAFS are correlated to the unequivocal identification of the defect type by compleme…

010302 applied physicsValence (chemistry)Absorption spectroscopyExtended X-ray absorption fine structureChemistryAb initioGeneral Physics and Astronomy02 engineering and technology021001 nanoscience & nanotechnology01 natural sciencesXANESlaw.inventionJsymbols.namesakeCrystallographyOxidation statelaw0103 physical sciencesddc:540symbolsPhysical and Theoretical Chemistry0210 nano-technologyElectron paramagnetic resonanceRaman spectroscopy
researchProduct

Positron trapping defects in free-volume investigation of Ge–Ga–S–CsCl glasses

2016

Abstract Evolution of free-volume positron trapping defects caused by crystallization process in (80GeS 2 –20Ga 2 S 3 ) 100−х (СsCl) x , 0 ≤ x ≤ 15 chalcogenide-chalcohalide glasses was studied by positron annihilation lifetime technique. It is established that CsCl additives in Ge–Ga–S glassy matrix transform defect-related component spectra, indicating that the agglomeration of free-volume voids occurs in initial and crystallized (80GeS 2 –20Ga 2 S 3 ) 100−х (СsCl) x , 0 ≤ x ≤ 10 glasses. Void fragmentation in (80GeS 2 –20Ga 2 S 3 ) 85 (СsCl) 15 glass can be associated with loosing of their inner structure. Full crystallization in each of these glasses corresponds to the formation of defe…

010302 applied physicsVoid (astronomy)RadiationMaterials scienceAnalytical chemistryChalcogenide glassMineralogy02 engineering and technology021001 nanoscience & nanotechnology01 natural sciencesPositron trappingSpectral linelaw.inventionAbsorption edgeFragmentation (mass spectrometry)law0103 physical sciencesCrystallization0210 nano-technologyInstrumentationPositron annihilationRadiation Measurements
researchProduct

Synergistic effect of fiber content and length on mechanical and water absorption behaviors of Phoenix sp. fiber-reinforced epoxy composites

2016

Phoenix sp. fiber-reinforced epoxy composites have been manufactured using compression molding technique. The effect of reinforcement volume content (0%, 10%, 20%, 30%, 40%, and 50%) and size (300 µm particles, 10 mm, 20 mm, and 30 mm fibers) on quasi-static and dynamic mechanical properties was investigated. Moreover, the water absorption properties of composites were analyzed at different environmental conditions (10℃, 30℃, and 60℃). For each reinforcement size, composites loaded with 40% in volume show highest tensile and flexural properties. Furthermore, composites with 300 µm particles present the best impact properties and the lowest water absorption, regardless of the environmental …

010302 applied physicsVolume contentAbsorption of waterMaterials sciencePolymers and PlasticsMaterials Science (miscellaneous)dynamic mechanical propertieCompression molding02 engineering and technologyEpoxy021001 nanoscience & nanotechnology01 natural sciencesIndustrial and Manufacturing Engineeringwater absorptionvolume fractionvisual_art0103 physical sciencesVolume fractionvisual_art.visual_art_mediummechanical propertieChemical Engineering (miscellaneous)FiberComposite materialPhoenix sp. fiber0210 nano-technologyJournal of Industrial Textiles
researchProduct

Tetrahedral versus octahedral Mn site coordination in wurtzite and rocksalt Zn1−xMnxO investigated by means of XAS experiments under high pressure

2007

Abstract We present the results of x-ray absorption measurements carried out in Zn 1− x Mn x O thin films under high pressure. The Mn environment remains essentially the same for nominal Mn concentrations given by x = 0.05 , 0.1, 0.15 and 0.25. Both the XANES (X-ray Absorption Near Edge Structure) and EXAFS (Extended X-ray Absorption Fine Structure) indicate that Mn occupies the Zn site, being surrounded by four oxygen atoms at 2.02±0.01 A. The substitutional hypothesis is reinforced by comparing the differences between the ambient (wurtzite) and high pressure (rocksalt) spectra, which correspond to tetrahedral and octahedral Mn environments.

010302 applied physicsX-ray absorption spectroscopyMaterials scienceExtended X-ray absorption fine structure02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesXANESSpectral lineX-ray absorption fine structureCrystallographyOctahedron0103 physical sciencesGeneral Materials ScienceElectrical and Electronic EngineeringAbsorption (chemistry)0210 nano-technologyWurtzite crystal structureSuperlattices and Microstructures
researchProduct

Spark Plasma Sintering of Metallic Glasses

2019

Spark plasma sintering (SPS) of metallic glasses (MG) can be quite different from sintering crystalline metallic alloys. Indeed, MG behave differently with increasing temperature, as they encounter a glass transition and devitrification. Their shaping can thus be compared to what can be performed on thermoplastic polymers. SPS is a promising way to prepare bulk parts from amorphous powders, since it allows very fast heating and cooling rates. It gives an advantage to avoid or limit devitrification of the amorphous phase upon the thermal cycle. However, diffusion mechanisms, which generally control densification, are activated at temperatures that are not compatible with MG structural integr…

010302 applied physics[CHIM.MATE] Chemical Sciences/Material chemistryAmorphous metalMaterials scienceDiffusionComposite numberSinteringSpark plasma sintering02 engineering and technology[CHIM.MATE]Chemical Sciences/Material chemistry01 natural sciencesAmorphous solid020303 mechanical engineering & transportsDevitrification0203 mechanical engineering0103 physical sciencesComposite materialGlass transitionComputingMilieux_MISCELLANEOUS
researchProduct

Experimental investigation of the effect of moisture on the acoustic properties of lightweight substrates used in green envelopes

2021

International audience; Substrates are used in green walls and roofs to supply air and water to the roots of the growing plants. These substrates are porous with micropores which store water and macropores which facilitate drainage and air entry. Effect of moisture on acoustic absorption is studied for two lightweight substrates: coir dust and perlite. Measurement of dry and moistened substrates are conducted to evaluate their effective speed of sound, attenuation, characteristic impedance, compressibility and density between 100 Hz and 1000 Hz using an impedance tube and the three microphone-two load method. Effect of moisture on these quantities is found to depend strongly upon the intera…

010302 applied physics[SPI.ACOU]Engineering Sciences [physics]/Acoustics [physics.class-ph]Materials scienceAcoustics and UltrasonicsMacroporeMoistureAcoustic porous mediumLightweight substrateSound absorption;Lightweight substrate;Acoustic porous medium;Moisture;Green envelopeGreen envelope01 natural sciencesCharacteristic impedance[SPI.MAT]Engineering Sciences [physics]/MaterialsSubstrate (building)Speed of sound0103 physical sciencesPerliteSound absorptionComposite material[SPI.NANO]Engineering Sciences [physics]/Micro and nanotechnologies/MicroelectronicsPorosity010301 acousticsMicroscale chemistryMoisture
researchProduct

High-pressure x-ray-absorption study of GaSe

2002

The III-VI layered semiconductor InSe has been studied by high-pressure single crystal x-ray absorption spectroscopy up to a maximum pressure of 14 GPa. The In-Se distance has been measured in both the low- pressure layered phase and the high-pressure NaCl phase. The bond compressibility in the layered phase is lower than the ``a'' crystallographic parameter compressibility, which implies an increase of the angle between the In-Se bond and the layer plane. Under plausible hypothesis, a description of the evolution of the whole structure with pressure is given. In particular, the intralayer distance is observed to increase with increasing pressure. A plausible precursor defect and a simple m…

010302 applied physics[SPI.ACOU]Engineering Sciences [physics]/Acoustics [physics.class-ph]Materials scienceCondensed matter physicsAbsorption spectroscopybusiness.industryPlane (geometry)[SDU.STU.GP]Sciences of the Universe [physics]/Earth Sciences/Geophysics [physics.geo-ph]X-ray02 engineering and technology021001 nanoscience & nanotechnology01 natural sciencesOpticsSemiconductorPhase (matter)0103 physical sciencesCompressibility[PHYS.COND.CM-MS]Physics [physics]/Condensed Matter [cond-mat]/Materials Science [cond-mat.mtrl-sci][PHYS.COND]Physics [physics]/Condensed Matter [cond-mat]0210 nano-technologyAbsorption (electromagnetic radiation)businessSingle crystalComputingMilieux_MISCELLANEOUS
researchProduct

Carbonyl-functionalized quaterthiophenes: a study of the vibrational Raman and electronic absorption/emission properties guided by theoretical calcul…

2011

This work investigates the evolution of the molecular, vibrational, and optical properties within a family of carbonyl-functionalized quaterthiophenes: 5,5'''-diheptanoyl-2,2':5',2'':5'',2'''-quaterthiophene (1), 5,5'''-diperfluorohexylcarbonyl-2,2':5',2'':5'',2'''-quaterthiophene (2), and 2,7-[bis(5-perfluorohexylcarbonylthien-2-yl)]-4H-cyclopenta[2,1-b:3,4-b']-dithiophene-4-one (3). The analysis is performed by Raman and UV/Vis absorption/excitation/fluorescence spectroscopy in combination with density functional calculations. Theoretical calculations show that substitution with carbonyl groups and perfluorohexyl chains induces progressive quinoidization of the π-conjugated backbone in co…

010304 chemical physicsAbsorption spectroscopyChemistryTime-dependent density functional theory010402 general chemistryResonance (chemistry)Photochemistry01 natural sciencesAtomic and Molecular Physics and OpticsFluorescence spectroscopyMolecular electronic transition0104 chemical sciencesCrystallographysymbols.namesakeUltraviolet visible spectroscopy0103 physical sciencesBathochromic shiftsymbolsPhysical and Theoretical ChemistryRaman spectroscopyChemphyschem : a European journal of chemical physics and physical chemistry
researchProduct

Carbonyl compounds of Tc, Re, and Bh: Electronic structure, bonding, and volatility.

2018

Calculations of molecular properties of M(CO)5 and MH(CO)5, where M = Tc, Re, and Bh, and of the products of their decomposition, M(CO)4 and MH(CO)4, were performed using density functional theory and coupled-cluster methods implemented in the relativistic program suits such as ADF, DIRAC, and ReSpect. The calculated first M—CO bond dissociation energies (FBDEs) of Bh(CO)5 and BhH(CO)5 turned out to be significantly weaker than those of the corresponding Re homologs. The reason for that is the relativistic destabilization and expansion of the 6d AOs, responsible for weaker σ-forth and π-back donations in the Bh compounds. The relativistic FBDEs of M(CO)5 have, therefore, a Λ-shape behavior …

010304 chemical physicsGeneral Physics and Astronomychemistry.chemical_elementBohriumInteraction modelElectronic structure010403 inorganic & nuclear chemistry01 natural sciencesBond-dissociation energy0104 chemical sciencesAdsorptionchemistry0103 physical sciencesMoleculePhysical chemistryDensity functional theoryPhysical and Theoretical ChemistryVolatility (chemistry)The Journal of chemical physics
researchProduct