Search results for "On resistance"
showing 10 items of 61 documents
Electronic properties and corrosion resistance of passive films on austenitic and duplex stainless steels
2018
Abstract Passive films were grown at constant potential in acidic (pH∼2) and alkaline (pH∼13) solutions on chromium, AISI 304L, AISI 316L and Duplex stainless steels. Passive films on chromium grow following a high field mechanism considering the presence of dissolution phenomena. According to the photoelectrochemical characterization, passive films on Cr have a bandgap of 3.4 eV when formed in acidic solution, and of 2.4 eV when formed in alkaline solution due to the formation of Cr(OH)3. These films result to be poorly stable against anodic dissolution due to a very anodic flat band potential. Conversely, impedance and photoelectrochemical measurements proved that passive films on stainle…
Preparation and characterization of brass-based coatings
2018
Cold Spray (CS) has been widely investigated owing to its high deposition efficiency and retention of the properties of starting materials. Thus, this process has shown obvious advantages over the fabrication of different copper-based deposits and its alloys over other techniques, such as electroplating, Laser Cladding or thermal spraying. As one of the main copper alloys, brass is implanted in the fields of architecture or industry. Nevertheless, nowadays it is clear that there is very little work on brass coatings, and they were mainly made by electroplating and any other deposition methods, which has severely limits their uses in many applications.This study was applied to develop the br…
Data from: Coping with the climate: cuticular hydrocarbon acclimation of ants under constant and fluctuating conditions
2018
Terrestrial arthropods achieve waterproofing by a layer of cuticular hydrocarbons (CHCs). At the same time, CHCs also serve as communication signals. To maintain waterproofing under different climate conditions, insects adjust the chemical composition of their CHC layer, but this may affect the communication via CHC. The detailed acclimatory changes of CHCs and how these influence their physical properties are still unknown. Here, we studied acclimation in two closely related ant species with distinct CHC profiles, Myrmica rubra and Myrmica ruginodis, in response to constant or fluctuating temperature and humidity regimes. We measured how acclimation affected CHC composition and viscosity, …
Sailing dinghy hydrodynamic resistance by experimental and numerical assessments
2020
Abstract Hull forms of high-performance sailing dinghies are very interesting for yacht designers. After a long period in which the attention has been focused on one-design boats, in recent years a few exciting restricted classes such as International Moth, International 14′, 18’ Skiff and Class A catamaran become recognized in several countries and led to interesting advances in high-performance yacht design. “1001VELAcup R3” class is two people racing dinghy designed according to a box rule with limitation on LOA and Bmax and total sail area. The boats must be designed and built by students of European Universities and race yearly in Italy. This paper focuses on two best-ranked boats “LED…
UAQ4 Levitating Train: Italian Maglev Transportation System
2014
This article illustrates the University of L'Aquila model 4 (UAQ4) Italian maglev train, a transportation system with zero motion resistance (except aerodynamic drag) and greatly reduced energy consumption, approaching zero at a low constant speed. The project is the result of more than 40 years of research in the field of nonconventional highspeed transportation systems. Its technological feasibility has been tested in the laboratory at the University of L'Aquila, Italy.
Soil management effect on soil penetration resistance in the vineyard
2013
In environments characterized by steep slopes or arranged in terraces, among the shallow tillage systems, rototilling is extensively used. However, the effect of the repeated use of rototilling has a considerable influence on soil characteristics; it appears finely powdered, soft and without structure. In order to limit these inconveniences, an innovative self-propelled machine equipped with working tools as a spade, to be used in steep slopes or arranged in terraces areas, was designed by the Mechanics Section of the SAF (Scienze Agrarie e Forestali) Department of the University of Palermo in cooperation with Agrotec company, Padua, Italy. The aim of this study is to compare the effects of…
Characterization and properties of PEO coatings on 7075 Al alloy grown in alkaline silicate electrolyte containing KMnO 4 additive
2017
Abstract Plasma electrolytic oxidation (PEO) was used to modify the surface of 7075 Al alloy by applying a bipolar pulsed-current in a silicate based electrolyte containing 0 to 3 g L− 1 KMnO4. For the coating produced in the base electrolyte, crystalline γ-Al2O3 was the main phase, while the coatings formed at the presence of KMnO4 consisted of α-Mn2O3 containing Si and Al oxides. A pancake structure was observed on surface of the coating produced in the base electrolyte, while a foam feature along with some volcano-like areas was detected on the surface of the coatings produced in the presence of KMnO4. The KMnO4 changed the discharge type leading to diminish the pores at the metal/coatin…
ELECTROCHEMICAL ANALYSIS ON FRICTION STIR WELDED AND LASER WELDED 6XXX ALUMINIUM ALLOYS T-JOINTS
2007
Friction Stir Welding (FSW) and Laser Welding (LW) can be successfully employed to weld aluminium alloys, in many cases overcoming the difficulties encountered with more conventional welding processes like MIG or TIG. The corrosion resistance of the welded joint remains, however, an important issue, especially in applications (like in aircrafts), where corrosion can induce structural failure: the weld region has often lower mechanical resistance in comparison with the parent material and a decrease in its corrosion resistance, especially when the corrosion damage can represent a potential crack initiation site, can be unacceptable in components design. In this work the corrosion resistance …
Improvement of oxidation resistance of polymer-based nanocomposites through sonication of carbonaceous nanoparticles
2020
Abstract The work aim is focused on two different aspects: first, the investigation of the effect of extended ultra-sound-assisted treatment (us) of carbonaceous nanoparticles, such as carbon nanotubes (CNTs) and carbon black (CB), on their radical scavenging activity, and second, the investigation of the oxidative resistance of polymer-based nanocomposites, containing us-treated CNTs and CB. Particularly, the CNTs and CB have been subjected to us sonication for different time intervals and the performed analysis reveals that both kinds of nanoparticles show decreased average hydrodynamic diameters and large content of surface defects. Really, the increased content of CNTs and CB defects, a…
The multi-effects of K2TiF6 additive on the properties of PEO coatings on AZ31 Mg alloy
2020
Abstract Plasma electrolytic oxidation of AZ31 Mg alloy was performed in an alkaline silicate-based solution containing various concentrations of K2TiF6 using unipolar waveform at a constant voltage. The surface morphology of all coatings was rough and contained a micro-pore network, micro-cracks, and granules of oxide compounds in different diameters and micro-pore levels. The coating is composed of MgO, MgF2, Mg2SiO4, SiO2 (amorphous), and TiO2 (crystalline and amorphous) phases. The average thickness of the coatings was increased by adding the K2TiF6, where EDS results showed that a skinny fluoride-rich passive layer forms. With increasing time and reaching the final potential, the TiO2 …