Search results for "Optical"
showing 10 items of 7671 documents
Mechanism of crystallization of fast fired mullite-based glass–ceramic glazes for floor-tiles
2006
Abstract The mechanism of crystallization from a B 2 O 3 -containing glass, with composition based in the CaO–MgO–Al 2 O 3 –SiO 2 system, to a glass–ceramic glaze was studied by different techniques. Glass powder pellets were fast heated, simulating current industrial tile processing methods, at several temperatures from 700 to 1200 °C with a 5 min hold. Microstructural study by field emission scanning electron microscopy revealed that a phase separation phenomenon occurred in the glass, which promoted the onset of mullite crystallization at 900 °C. The amount of mullite in the glass heated between 1100 and 1200 °C was around 20 wt%, as determined by Rietveld refinement. The microstructure …
Renewable polyol obtained by microwave-assisted alcoholysis of epoxidized soybean oil: Preparation, thermal properties and relaxation process
2019
[EN] The soybean oil polyol (SOP) use as feedstock in the polyurethane industry has been recently emphasized due to its excellent resistance to hydrolysis, which is also applicable in coatings and thermal insulation. In this article, the SOP was obtained by a very fast microwave-assisted alcoholysis of epoxidized soybean oil (ESO). The preparation method, thermal properties, and relaxation process were evaluated. High yields as opening and consumption epoxy group and selectivity of 99.8 mol%, 985 mol%, and 71.2 mol% were obtained. Through titrations, nuclear magnetic resonance and gel permeation chromatography were identified parameters as 0.32 mg KOH.g(-1) acid number, 190 mg KOH.g(-1) hyd…
Femtosecond up-conversion technique for probing the charge transfer in a P3HT : PCBM blend via photoluminescence quenching
2009
We report on an experimental study of the charge transfer dynamics in a P3HT : PCBM blend by means of a femtosecond fluorescence up-conversion technique. Using two-photon excitation we probe the exciton dynamics in P3HT and a P3HT : PCBM blend with a weight ratio of 1 : 1 at excitation densities of up to 6 × 1018 cm−3. In both samples we find strongly nonexponential decay traces compatible with (i) diffusion-limited exciton–exciton annihilation and (ii) diffusion-limited donor–acceptor charge transfer in the polymer blend. Additionally, our results indicate that in the P3HT : PCBM blend about 50% of the photogenerated excitons undergo a prompt charge transfer process on a time scale of abou…
Calculations of high-power production target and beamdump for the GSI future Super-FRS for a fast extraction scheme at the FAIR Facility
2005
A superconducting fragment separator (Super-FRS) is being designed for the production and separation of radioactive isotopes at the future FAIR (Facility for Antiprotons and Ion Research) facility at Darmstadt. This paper discusses various aspects and requirements for the high-power production target that will be used in the Super-FRS experiments. The production target must survive over an extended period of time as it will be used during the course of many experiments. The specific power deposited by the high intensity beam that will be generated at the future FAIR facility will be high enough to destroy the target in most of the cases as a result of a single shot from the new heavy ion sy…
Electronic properties of Co2MnSi thin films studied by hard x-ray photoelectron spectroscopy
2009
This work reports on the electronic properties of thin films of the Heusler compound Co2MnSi studied by means of hard x-ray photoelectron spectroscopy (HAXPES). The results of photoelectron spectroscopy from multilayered thin films excited by photons of 2?8?keV are presented. The measurements were performed on (substrate/buffer layer/Co2MnSi(z)/capping layer) multilayers with a thickness z ranging from 0 to 50?nm. It is shown that high energy spectroscopy is a valuable tool for non-destructive depth profiling. The experimentally determined values of the inelastic electron mean free path in Co2MnSi increase from about 19.5 to 67?? on increasing the kinetic energy from about 1.9 to 6.8?keV. T…
Hard x-ray photoelectron spectroscopy of buried Heusler compounds
2009
This work reports on high energy photoelectron spectroscopy from the valence band of buried Heusler thin films (Co2MnSi and Co2FeAl0.5Si0.5) excited by photons of about 6?keV energy. The measurements were performed on thin films covered by MgO and SiOx with different thicknesses from 1 to 20?nm of the insulating layer and additional AlOx or Ru protective layers. It is shown that the insulating layer does not affect the high energy spectra of the Heusler compound close to the Fermi energy. The high resolution measurements of the valence band close to the Fermi energy indicate a very large electron mean free path of the electrons through the insulating layer. The spectra of the buried thin fi…
Magnetic properties of Co2Mn1−xFexSi Heusler alloys
2006
Co2Mn1−xFexSi Heusler alloys with Fe concentration x = 0–0.4 as prepared by arc melting show a L21 long range order for all Fe concentrations. Magnetic properties of Co2Mn1−xFexSi Heusler alloys were investigated by magnetometry and circular magnetic dichroism. The magnetization of the Fe doped Heusler alloys is in agreement with the Slater–Pauling values expected for half-metallic ferromagnets. Element specific magnetic moments as determined by x-ray absorption using the total electron yield method are in disagreement with theoretical predictions for x = 0 but approach the predicted values as the Fe concentration increases. Surprisingly small Fe concentration increases the magnetic moments…
High-spin polarization of Heusler alloys
2006
Fermi surface of a half-metal compound with cubic Fm–3m symmetry: Heusler alloy or double perovskite.The inset shows the spin resolved density of state for a CCFA Heusler compound. ( This illustration appears on the cover of the print edition. ) This cluster issue of Journal of Physics D: Applied Physics is devoted to magnetic Heusler alloys. This class of materials is currently considered to contain the most attractive half-metallic ferromagnets due to their high Curie temperatures and their structural relation to conventional semiconductors. The first compound to be identified as a half-metallic ferromagnet, by de Groot et al back in 1983, was the half-Heusler alloy NiMnSb. After a period…
Effects of post-growth annealing on structural and compositional properties of the Co2Cr0.6Fe0.4Al surface and its relevance for the surface electron…
2009
In this study we investigate the influence of post-growth annealing on different Co2Cr0.6Fe0.4Al samples. We find strong changes in the geometric surface structure as well as in the element specific concentrations during the annealing process. These irreversible changes go in hand with characteristic changes in the electron spin polarization (ESP) at the surface: as observed in Cinchetti et al (2007 J. Phys. D: Appl. Phys. 40 1544), the iron buffered sample shows the largest spin polarization at the Fermi level. The latter remains positive as a consequence of the reduced density of states for the minority carriers due to the predicted minority gap, which can be clearly seen for all samples …
A spatially resolved investigation of the local, micro-magnetic domain structure of single and polycrystalline Co2FeSi
2007
The Heusler compound Co2FeSi is a promising material for magneto-electronic devices. With a Curie temperature of 1100?K and a saturation magnetization of 6?Bohr magnetons and a high spin polarization at the Fermi edge it fulfils the essential requirements for magnetic sensors or spin valve structures. An essential feature for such devices is the micro-magnetic domain structure. X-ray magnetic circular dichroism?photo emission electron microscopy has been used for a direct observation of the domain structure of single- and polycrystalline samples. The polycrystalline material exhibits a micro-magnetic ripple structure, as it is well known for pure Co and other polycrystalline Heusler compoun…