Search results for "Optoelectronics"
showing 10 items of 2306 documents
Annealing study of oxygenated and non-oxygenated float zone silicon irradiated with protons
2003
Abstract Introducing oxygen into the silicon material is believed to improve the radiation hardness of silicon detectors. In this study, oxygenated and non-oxygenated silicon samples were processed and irradiated with 15 MeV protons. In order to speed up the defect reactions after the exposure to particle radiation, the samples were heat treated at elevated temperatures. In this way, the long-term stability of silicon detectors in hostile radiation environment could be estimated. Current–voltage measurements and Surface Photovoltage (SPV) method were used to characterize the samples.
Octave Spanning Supercontinuum in Titanium Dioxide Waveguides
2018
International audience; We report on the experimental generation of an octave-spanning supercontinuum in a 2.2 cm-long titanium dioxide optical waveguide with two zero dispersion wavelengths. The resulting on-chip supercontinuum reaches the visible wavelength range as well as the mid-infrared region by using a femtosecond fiber laser pump at 1.64 µm.
All polarization-maintaining assively mode-locked yb-doped fiber laser : pulse compression using an anomalous polarization-maintaining photonic cryst…
2019
We report the generation of short pulses at 1 μm using an all-polarization-maintaining (PM) fiber configuration. The pulses are provided by an all normal-dispersion Fabry-Perot Yb-doped cavity and are compressed with an anomalous polarization-maintaining photonic crystal fiber (PM PCF). Opposed to standard configurations; here the filtering action is solely performed by the finite bandwidth of the gain medium. The laser generates 8 ps width sech 2 profile pulses at 1046.8 nm with a −10 dB bandwidth of 5.9 nm. After compression using the PM PCF, pulses with an FWHM of 3 ps were obtained, limited by the actual value of the available anomalous dispersion. We also report the changes in the outp…
Plasmonic Stripes in Aqueous Environment Co-Integrated With Si3N4 Photonics
2018
We demonstrate the design, fabrication, and the experimental characterization of gold-based plasmonic stripes butt-coupled with low-pressure-chemical-vapor-deposition (LPCVD)-based Si3N4 waveguides for the excitation of surface-plasmon-polariton (SPP) modes in aqueous environment. Plasmonic gold stripes, in aqueous environment, with cross-sectional dimensions of 100 nm × 7 μm were interfaced with 360 nm × 800 nm Si3N4 waveguides cladded with low-temperature-oxide, exploiting linear photonic tapers with appropriate vertical (VO) and longitudinal (LO) offsets between the plasmonic and photonic waveguide facets. An interface insertion loss of 2.3 ± 0.3 dB and a plas…
Invited Article: Ultra-broadband terahertz coherent detection via a silicon nitride-based deep sub-wavelength metallic slit
2018
We present a novel class of CMOS-compatible devices aimed to perform the solid-state-biased coherent detection of ultrashort terahertz pulses, i.e., featuring a gap-free bandwidth at least two decades-wide. Such a structure relies on a 1-µm-wide slit aperture located between two parallel aluminum pads, embedded in a 1-µm-thick layer of silicon nitride, and deposited on a quartz substrate. We show that this device can detect ultra-broadband terahertz pulses by employing unprecedented low optical probe energies of only a few tens of nanojoules. This is due to the more than one order of magnitude higher nonlinear coefficient of silicon nitride with respect to silica, the nonlinear material emp…
Phase-Sensitive Detection for Optical Sensing With Porous Silicon
2012
We report on a photonic sensor with an ultralow limit of detection (LoD) based on a phase interrogation readout scheme together with an anisotropic porous silicon (PSi) membrane. First, the fabrication of porous free-standing membranes from medium doped (100) surface oriented silicon, with pore diameters suitable for the infiltration of biomolecules, around 50 nm, is reported. Then, the phase interrogation scheme for characterizing the PSi membranes is presented whose results show that while volumetric sensitivity increases with the membrane thickness, the resolution in the birefringence measurements decrease dramatically due to depolarization effects. The best LoD was found to be equal to …
Electro-optical characterization of new classes of Silicon Carbide UV photodetectors
2014
In this paper, we present the fabrication process steps and the characterization of 4H-SiC vertical Schottky UV detectors, where interdigitated strips, acting as top metal contacts, have been realized in $\hbox{Ni}_{2}\hbox{Si}$ . These devices exploit the pinch-off surface effect. $I$ – $V$ and $C$ – $V$ characteristics, as functions of temperature, were measured in dark conditions. In addition, we have carried out responsivity measurements, for wavelengths ranging from 200 to 400 nm, at varying package temperature and applied reverse bias. A comparison among devices having different strip pitch sizes has been performed, thus finding out that the 10- $\mu\hbox{m}$ pitch class demonstrates …
All-Organic Waveguide Sensor for Volatile Solvent Sensing
2019
This work was supported by ERDF 1.1.1.1 Activity Project Nr. 1.1.1.1/16/A/046 “Application assessment of novel organic materials by prototyping of photonic devices”. We acknowledge Igors MIHAILOVS for valuable discussions.
Time of flight for photon in human skin
2016
The time of flight for photons in human skin was measured using picosecond diode laser. Two different wavelength lasers were used - 405 nm and 510 nm. A difference for time of flight in normal skin and in nevus was observed as well as a difference for different wavelength laser irradiation was observed. For 405 nm laser irradiation the difference was 41 ps while comparison of time of flights skin and nevi using 510 nm irradiation showed a result of 32 ps. Results allow to conclude that the time photon travels in skin might depend on the characteristics of the medium and wavelength of the irradiation. This can be related to known data for light penetration depth in human skin for different w…
All-Fiber Laser With Intracavity Acousto-Optic Dynamic Mode Converter for Efficient Generation of Radially Polarized Cylindrical Vector Beams
2017
We report an all-fiber laser that emits a radially polarized cylindrical vector beam (CVB) at 1 μm based on an intracavity acousto-optic mode converter. We efficiently generate the CVB, taking advantage of the acousto-optic coupling from the HE11 mode to the TM01 mode in a two-mode fiber. The laser can be switched from emitting a Gaussian-like beam to a radially polarized CVB. Radially polarized CVBs with modal and polarization purities >98% and a maximum power of 65 mW were generated.