Search results for "Optoelectronics"
showing 10 items of 2306 documents
Time‐resolved absorption and luminescence following electron‐hole pair creation in ZnO
2008
We report transient absorption induced by electron-hole excitation in undoped ZnO. A laser pump/continuum probe method covers 2–300 ps, and an electron pulse with lamp transmission covers 8–300 ns. The broad absorption spectrum increases monotonically with wavelength from 900 to 1600 nm. Following a reasonable hypothesis that the free-carrier-like induced infrared absorption is proportional to the total number of free carriers, excitons, and shallow-trapped carriers in the sample, these data allow setting an upper limit on the quantum efficiency of a specified lifetime component of luminescence. For the undoped commercial ZnO studied in this report, the quantum efficiency of room temperatur…
Very narrow-bandwidth tunable infrared difference frequency generation with injection-locked dye lasers
1989
Two flashlamp pumped dye lasers of very high spectral quality are mixed in a LiIO3 crystal to generate a tunable infrared beam through the difference frequency mixing. Thanks to the injection-locking process of the pulsed dye lasers leading to a linewidth of 6 MHz with peak powers of about 10 kW, we obtain an IR beam tunable from 3.5 to 5.9 μm with a peak power of 40 W and a linewidth of 9 MHz. As an application we present a spectrum of N2O obtained by differential absorption near 1880 cm−1. The lines of thisQ-branch are Doppler limited at the working pressure (102 Pa).
Random Laser Based on TiO2–Nanomembranes
2012
We demonstrated directional random laser emission from a dye-doped polymer film in the presence of a scattering medium consisting of TiO 2 nanomembranes. Evidence for coexistence of extended and localized modes are presented.
Electro-optical characterization of ruthenium-based dye sensitized solar cells: A study of light soaking, ageing and temperature effects
2017
Abstract In this work, we report on the electro-optical characterization of Dye Sensitized Solar Cells (DSSCs) which use ruthenium complexes as sensitizers. In particular, several kinds of measurements have been performed to study the electrical performances and the efficiency levels of the cells at different operating conditions. In detail, the measurements have been conducted at varying temperatures and hours of light soaking. Our results show that the short circuit current density J SC , the open circuit voltage V OC and the conversion efficiency η increase with the hours of light soaking, while they decrease with temperature. A thorough investigation on the light soaking process at the …
One diode circuital model of light soaking phenomena in Dye-Sensitized Solar Cells
2018
Abstract In this work, we report on the modelling of light soaking effect on Ruthenium-based Dye Sensitized Solar cells (DSSCs). Such a phenomenon can be detected when exposing the cells at increasing hours of illumination and produces a reversible performance increase. Starting from the results obtained through the electro-optical characterization of the cells, we applied a one-diode circuital-model. Our results show a good agreement between the experimental and the simulated data, with a mean square error in the order of 10−12 and a maximum error in current lower than 0.6%. Finally such results allowed us to infer some precise trends followed by the cells main electrical parameters and of…
Electrical and photoelectrical measurements on ZnO-Nanowires coated with PEDOT:PSS for Dye-Sensitized Solar Cells
2011
ABSTRACTDye-sensitized solar cells composed of an n-doped ZnO nanowire array and a p-doped polymer layer appears to be a promising candidate for low-cost production of environment-friendly solar cells. In this work, we investigate hybrid devices consisting of a transparent conducting oxide (TCO) substrate, ZnO-nanowires (ZnO-NW) or a sol-gel prepared ZnO layer, a ruthenium dye (N719) and a PEDOT:PSS or P3HT layer. The dense polycrystalline ZnO layer is able to prevent short circuits, which have a strong effect on the performance of the solar cells. This is demonstrated by the use of only the ZnO layer which improves the open circuit voltage by a factor of 2 and the efficiency by a factor of…
Monte Carlo simulation of high‐order harmonics generation in bulk semiconductors and submicron structures
2004
To qualify the feasibility of standard semiconductor materials and Schottky‐barrier diodes (SBDs) for THz high‐order harmonic generation and extraction, the harmonic intensity, intrinsic noise and signal‐to‐noise ratio are calculated by the Monte Carlo method when a periodic high‐frequency large‐amplitude external signal is applied to a semiconductor device. Due to very high signal‐to‐noise ratio heavily doped GaAs SBDs are found to exhibit conditions for frequency mixing and harmonic extraction that are definitively superior to those of bulk materials. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)
Data Transmission and Thermo-Optic Tuning Performance of Dielectric-Loaded Plasmonic Structures Hetero-Integrated on a Silicon Chip
2012
We demonstrate experimental evidence of the data capture and the low-energy thermo-optic tuning credentials of dielectric-loaded plasmonic structures integrated on a silicon chip. We show 7-nm thermo-optical tuning of a plasmonic racetrack-resonator with less than 3.3 mW required electrical power and verify error-free 10-Gb/s transmission through a 60-mu m-long dielectric-loaded plasmonic waveguide. We demonstrate experimental evidence of the data capture and the low-energy thermo-optic tuning credentials of dielectric-loaded plasmonic structures integrated on a silicon chip. We show 7-nm thermo-optical tuning of a plasmonic racetrack-resonator with less than 3.3 mW required electrical powe…
Performance comparison of mono-polar and bi-polar configurations of alkaline electrolysis stack through 3-D modelling and experimental fabrication
2020
Abstract Generation of hydrogen using electrolysis process with integrated renewable energy sources is highly important especially in environmental aspects. In this paper, we demonstrate that the enhancement of electrolysis performance of alkaline electrolysis stacks by diminishing the distance between electrodes, while changing the properties of the Membrane Electrode Assembly (MEA). Prior to that, the performances of mono-polar and bi-polar configurations of alkaline electrolysis stack are compared through 3-D modelling and experimental fabrication. At first, two different single cell alkaline electrolysers are designed using SolidWorks as a design software and the designed cell has been …
Ultrabroadband single-cycle terahertz pulses with peak fields of 300 kV cm-1 from a metallic spintronic emitter
2017
To explore the capabilities of metallic spintronic thin-film stacks as a source of intense and broadband terahertz electromagnetic fields, we excite a W/CoFeB/Pt trilayer on a large-area glass substrate (diameter of 7.5 cm) by a femtosecond laser pulse (energy 5.5 mJ, duration 40 fs, wavelength 800 nm). After focusing, the emitted terahertz pulse is measured to have a duration of 230 fs, a peak field of 300 kV cm$^{-1}$ and an energy of 5 nJ. In particular, the waveform exhibits a gapless spectrum extending from 1 to 10 THz at 10% of amplitude maximum, thereby facilitating nonlinear control over matter in this difficult-to-reach frequency range and on the sub-picosecond time scale.