Search results for "Oxidizing agent"

Diurnal variability, photochemical production and loss processes of hydrogen peroxide in the boundary layer over Europe

2019

Hydrogen peroxide (H2O2) plays a significant role in the oxidizing capacity of the atmosphere. It is an efficient oxidant in the liquid phase and serves as a temporary reservoir for the hydroxyl radical (OH), the most important oxidizing agent in the gas phase. Due to its high solubility, removal of H2O2 due to wet and dry deposition is efficient, being a sink of HOx (OH+HO2) radicals. In the continental boundary layer, the H2O2 budget is controlled by photochemistry, transport and deposition processes. Here we use in situ observations of H2O2 and account for chemical source and removal mechanisms to study the interplay between these processes. The data were obtained during five ground-base…

A Thermophilic Tetramolecular G-Quadruplex/Hemin DNAzyme.

2017

International audience; The quadruplex-based DNAzyme system is one of the most useful artificial enzymes or catalysts; their unique properties make them reliable alternatives to proteins for performing catalytic transformation. The first prototype of a thermally stable DNAzyme system is presented. This thermophilic DNAzyme is capable of oxidizing substrates at high temperatures (up to 95 degrees C) and long reaction times (up to 18 h at 75 degrees C). The catalytic activity of the DNAzymes were investigated with the standard peroxidase-mimicking oxidation of 2,2'-azino-bis(3-ethylbenzothiozoline-6-sulfonic acid) (ABTS) by H2O2. The step-by-step design of this unique heat-activated G-quadrup…

Design of experiment approach applied to reducing and oxidizing tolerance of anode supported solid oxide fuel cell. Part I: Microstructure optimizati…

2011

The main drawback of Ni/YSZ anode supports for solid oxide fuel cell application is their low tolerance to reducing and oxidizing (RedOx) atmosphere changes, owing to the Ni/NiO volume variation. This work describes a structured approach based on design of experiments for optimizing the microstructure for RedOx stability enhancement. A full factorial hypercube design and the response surface methodology are applied with the variables and their variation range defined as: (1) NiO proportion (40-60 wt% of the ceramic powders), (2) pore-former proportion (0-30 wt% corresponding to 0-64 vol.%), (3) NiO particle size (0.5-8 mu m) and (4) 8YSZ particle size (0.6-9 mu m).

Spectroscopic and DFT Characterization of a Highly Reactive Nonheme FeV–Oxo Intermediate

2018

The reaction of [(PyNMe3)FeII(CF3SO3)2], 1, with excess peracetic acid at −40 °C generates a highly reactive intermediate, 2b(PAA), that has the fastest rate to date for oxidizing cyclohexane by a nonheme iron species. It exhibits an intense 490 nm chromophore associated with an S = 1/2 EPR signal having g-values at 2.07, 2.01, and 1.94. This species was shown to be in a fast equilibrium with a second S = 1/2 species, 2a(PAA), assigned to a low-spin acylperoxoiron(III) center. Unfortunately, contaminants accompanying the 2(PAA) samples prevented determination of the iron oxidation state by Mossbauer spectroscopy. Use of MeO-PyNMe3 (an electron-enriched version of PyNMe3) and cyclohexyl pero…

Comparative Investigations on the Photosynthetic Electron Transport Chain of Spruce (Picea Abies) with Different Degrees of Damage in the Open Air

1988

Several components of the photosynthetic electron transport chain (P-700, cytochrome f, QB-protein) as well as the rate of electron transport and the chlorophyll content of the needles of spruce trees with different degrees of damage were investigated. The investigations were carried out in pair comparison at a location in the Hunsruck (West Germany). The rate of electron transport was determined as photoreduction of 2,6-dichlorophenolindophenol. Significant damage to the electron transport system is shown in the thylakoids of the damaged trees compared to the less severely damaged trees. In the spruce trees with more damage, the rates of electron transport are significantly lower. The inve…

DNA damage profiles induced by oxidizing agents

1995

Chemiluminometric photo-induced determination of Strychnine in a Multicommutation flow assembly

2007

This paper deals on the determination of Strychnine, a potent and dangerous pesticide and the analytical procedure is based on the photo-induced chemiluminescence of the pesticide by means of the Multicommutation continuous-flow methodology. Small segments of the pesticide solution were sequentially alternated with segments of the solution for adjusting the suitable medium for the photodegradation. The required time of UV irradiation was obtained by stopped-flow during 150 s; then, the resulting solution formed alternated segments with the oxidizing solution containing 5 × 10−3 mol l−1 Ce(IV) in 0.6 mol l−1 nitric acid. The calibration range, from 2 μg l−1 to 50 mg l−1, resulted in a linear…

New Reusable Solid Biosensor with Covalent Immobilization of the Horseradish Peroxidase Enzyme: In Situ Liberation Studies of Hydrogen Peroxide by Po…

2019

Herein, we reported a chemiluminescent biosensor based on the covalent immobilization of the horseradish peroxidase (HRP) enzyme on a polydimethylsiloxane (PDMS) support to quantify in situ hydrogen peroxide (H2O2). The chemiluminescent reaction based on the use of luminol as an oxidizable substrate, with HRP as the catalyst, has been used in order to quantify H2O2 as the oxidizing agent. The performance of the proposed biosensor has been demonstrated to determine H2O2 liberated by cells in a culture medium and for evaluating the delivery of H2O2 from denture cleaner tablets, as examples of application. For both analyses, the results indicated that the biosensor is cost-effective, sensitive…

Flow injection-spectrophotometric determination of cresol compounds in water by reaction withp-aminophenol

1993

A spectrophotometric method has been developed for the simultaneous determination ofo-cresol andm-cresol in water by reaction withp-aminophenol (PAP). Three different methodologies have been assayed; (i) batch analysis, after reaction in an alkaline medium in the presence of dissolved molecular oxygen as oxidizing agent, (ii) a stopped-flow procedure, carried out in the presence of KIO4 and (iii) a flow injection method based on the same approach. The batch procedure requires 22 min for the full development of colour witho-cresol and 12 min form-cresol. In the stopped-flow mode, using KIO4 and a reaction time of 12 min, better sensitivity can be obtained for both compounds and limits of det…

Flow injection biamperometric determination of chloramphenicol and related nitro compounds by on-line chemical photodegradation

2000

Abstract An unsegmented continuous-flow assembly for the determination of chloramphenicol is proposed. The determination is based on the on-line photodegradation of the drug in an NH4+/NH3 buffer at pH 10.4 by using a photoreactor consisting of a 697 cm long × 0.8 mm ID piece of PTFE tubing coiled around an 8 W low-pressure mercury lamp. Photodegraded chloramphenicol is detected by photolytic cleavage of nitrite from the parent compound as well as by organic oxidizing photofragments, and their subsequent reaction with iodide ion, which is monitored biamperometrically. Triiodide thus formed is detected in excess iodide solution by polarizing two platinum electrodes at 100 mV. The calibration…