Search results for "Oxidizing agent"
showing 10 items of 71 documents
Performance of a thermoelectric module based on n-type (La0.12Sr0.88)0.95TiO3-δ and p-type Ca3Co4-xO9+δ
2020
Here, we present the performance of a thermoelectric (TE) module consisting of n-type (La0.12Sr0.88)0.95TiO3 and p-type Ca3Co4-xO9+δ materials. The main challenge in this investigation was operation of TE module in different atmosphere conditions, since n-type has its optimum TE-performance at reducing, while p-type at oxidizing conditions. The TE module was exposed to two different atmospheres and demonstrated higher stability in N2 atmosphere than in air. The maximum electrical power output decreased after 40 h when the hot side was exposed to N2 at 600 °C, while only 1 h at 400 °C in ambient air was enough to oxidize (La0.12Sr0.88)0.95TiO3 followed by a reduced electrical power output. T…
Metal- and reagent-free highly selective anodic cross-coupling reaction of phenols.
2014
The direct oxidative cross-coupling of phenols is a very challenging transformation, as homo-coupling is usually strongly preferred. Electrochemical methods circumvent the use of oxidizing reagents or metal catalysts and are therefore highly attractive. Employing electrolytes with a high capacity for hydrogen bonding, such as methanol with formic acid or 1,1,1,3,3,3-hexafluoro-2-propanol, a direct electrolysis in an undivided cell provides mixed 2,2′-biphenols with high selectivity. This mild method tolerates a variety of moieties, for example, tert-butyl groups, which are not compatible with other strong electrophilic media but vital for later catalytic applications of the formed products.
Effect of pH, substrate and free nitrous acid concentrations on ammonium oxidation rate.
2012
Respirometric techniques have been used to determine the effect of pH, free nitrous acid (FNA) and substrate concentration on the activity of the ammonium oxidizing bacteria (AOB) present in an activated sludge reactor. With this aim, bacterial activity has been measured at different pH values (ranging from 6.2 to 9.7), total ammonium nitrogen concentrations (ranging from 0.1 to 10 mg TAN L-1) and total nitrite concentrations (ranging from 3 to 43 mg NO2-N L-1). According to the results obtained, the most appropriate kinetic expression for the growth of AOB in activated sludge reactors has been established. Substrate half saturation constant and FNA and pH inhibition constants have been obt…
Sequential biological and photocatalysis based treatments for shipboard slop purification: A pilot plant investigation
2019
This study investigated the treatment of a shipboard slop containing commercial gasoline in a pilot plant scale consisting of a membrane biological reactor (MBR) and photocatalytic reactor (PCR) acting in series. The MBR contributed for approximately 70% to the overall slop purification. More precisely, the biological process was able to remove approximately 40%, on average, of the organic pollution in the slop. Nevertheless, the membrane was capable to retain a large amount of organic molecules within the system, amounting for a further 30% of the influent total organic content removal. However, this affected the membrane fouling, thus resulting in the increase of the pore blocking mechani…
Comparative electrochemical treatments of two chlorinated aliphatic hydrocarbons. Time course of the main reaction by-products.
2011
The chlorinated aliphatic hydrocarbons conjugate toxicity with high chemical stability, bioaccumulation and long-range diffusivity. Chloroethanes are particularly ubiquitous in the industry and in household products, and their entry to the environment may entail potential risks for the living beings. At present, the US Environmental Protection Agency is carrying out the Endocrine Disruptor Screening Program (EDSP), where 1,2-dichloroethane (DCA) and 1,1,2,2-tetrachloroethane (TCA) are considered as priorities for their potential effects on the endocrine system. DCA is also found in the list of priority substances drawn up by the European Commission. To avoid the release of chloroethanes int…
Cerium(IV) arsenite as a solid-phase reactor for use in flow-injection analysis. Spectrophotometric determination of promethazine
1992
Abstract Cerium(IV) arsenite is used as a strongly oxidizing solid-phase reactor in an unsegmented continuous-flow injection assembly. Its preparation procedure produces particles of uniform size with suitable physico-chemical properties for use in a continuous-flow system. A manifold is proposed for the determination of promethazine in pharmaceutical preparations by spectrophotometric monitoring of the red colour produced by the oxidized drug. A linear calibration graph is obtained over the range 5–400 μg ml −1 of promethazine.
Metal‐Free Twofold Electrochemical C−H Amination of Activated Arenes: Application to Medicinally Relevant Precursor Synthesis
2020
Abstract The efficient production of many medicinally or synthetically important starting materials suffers from wasteful or toxic precursors for the synthesis. In particular, the aromatic non‐protected primary amine function represents a versatile synthetic precursor, but its synthesis typically requires toxic oxidizing agents and transition metal catalysts. The twofold electrochemical amination of activated benzene derivatives via Zincke intermediates provides an alternative sustainable strategy for the formation of new C−N bonds of high synthetic value. As a proof of concept, we use our approach to generate a benzoxazinone scaffold that gained attention as a starting structure against ca…
Green synthesis of bromine by TiO2 heterogeneous photocatalysis and/or ozone: A kinetic study
2018
Abstract Elemental bromine is an industrially relevant compound traditionally produced from bromide ions by using chlorine as the oxidizing agent. Problems related to transportation and handling of the corrosive, expensive and toxic chlorine make green synthetic alternatives highly desirable. In this paper the green synthesis of bromine from bromide in aqueous solutions under mild conditions by means of TiO2 photocatalysis and/or ozonation has been investigated from a kinetic point of view. The ozonation in the absence of the photocatalyst follows a first order kinetic with respect to both ozone and bromide. The kinetics of the reactions in the presence of the photocatalyst has been describ…
Modeling plutonium sorption to kaolinite: Accounting for redox equilibria and the stability of surface species
2015
Abstract Plutonium with its particularly complex redox chemistry may be thermodynamically stable in the states + III to + VI depending on the redox conditions in the environment. Mineral surfaces can also affect Pu redox speciation. Therefore, the interpretation of Pu sorption data becomes particularly challenging, even for simplified laboratory experiments. The present study focuses on Pu sorption to kaolinite. Am(III), Th(IV), Np(V) and U(VI) literature sorption data are used as analogues for the corresponding Pu redox states to calibrate a simple surface complexation model, and the Nernst formalism is applied. Two independent pH–pe diagrams, one for the kaolinite surface and another for …
Impact of oxidoreduction potential and of gas bubbling on rheological properties of non-fat yoghurt
2010
International audience; The aim of this work was to study the effect of different gaseous conditions on the physico-chemical properties of yoghurt. Four conditions of oxidoreduction potential (Eh7), +433 mV (milk gassed with air), +405 mV (ungassed milk), +283 mV (milk gassed with N2) and −349 mV (milk gassed with N2–H2) were applied to milk. The rheological properties and microstructure of these yoghurts were determined by measuring apparent viscosity, whey separation (WS) and using confocal laser scanning microscopy. Exopolysaccharide (EPS) production by lactic acid bacteria (LAB) was also studied, and production was increased for extreme Eh7 values: the highest values were obtained for a…