Search results for "PACTOR"
showing 10 items of 33 documents
Fundamental characterisation of reclaimed asphalts: The importance of testing homogeneous specimens
2013
This study highlights the importance of defining appropriate specimen manufacturing procedures when assessing the fundamental properties of reclaimed asphalt (RA) mixes for further modelling purposes. Two gyratory compactor procedures were used: the first leading to specimens with a non-uniform air voids distribution and the second tailored to obtain homogeneous specimens. The study was performed by using three stone mastic asphalts incorporating up to 30% of RA but designed to have identical properties. A detailed characterisation of the loose mixes and binders, an X-ray computer tomography micro-structural study of the manufactured specimens and a further mechanical characterisation showe…
Analysis of multipactor RF breakdown in a waveguide containing a transversely magnetized ferrite
2016
In this paper, the multipactor RF breakdown in a parallel-plate waveguide partially filled with a ferrite slab magnetized normal to the metallic plates is studied. An external magnetic field is applied along the vertical direction between the plates in order to magnetize the ferrite. Numerical simulations using an in-house 3-D code are carried out to obtain the multipactor RF voltage threshold in this kind of structures. The presented results show that the multipactor RF voltage threshold at certain frequencies becomes considerably lower than for the corresponding classical metallic parallel-plate waveguide with the same vacuum gap
Experimental Study of the Multipactor Effect in a Partially Dielectric-Loaded Rectangular Waveguide
2019
This letter presents the experimental study of the multipactor threshold in a partially dielectric-loaded rectangular waveguide, whose results validate a multipactor model recently developed by the authors, which includes the charge distribution appearing on the dielectric surface during the multipactor discharge. First, the variation of the multipactor RF voltage threshold has been theoretically analyzed in different waveguide configurations: in an empty waveguide, and also in the cases of a one-sided and two-sided dielectric-loaded waveguides. To reach this aim, an in-house Monte Carlo simulation tool has been developed. The Secondary Electron Yield (SEY) of the metallic and dielectric ma…
Multipactor Analysis in Coaxial Waveguides for Satellite Applications using Frequency-Domain Methods
2006
This work presents the analysis, manufacturing and testing of a coaxial sample in order to investigate the multipactor effect in this kind of waveguide structures. Several in-home and commercial software have been used to design a quarter-wave transformer coaxial circuit centered at 1.35 GHz. The multipactor analysis of this device has been carried out allowing the prediction of the RF breakdown multipactor threshold. Moreover, the multipactor onset of such a prototype has been measured showing a very good agreement with our simulations. In addition to this, comparison has been also done with results from the technical literature fully validating the new algorithm developed.
Analysis of Multipactor Effect in a Partially Dielectric-Loaded Rectangular Waveguide
2019
This paper 1 presents a study of the multipactor 2 effect in a partially dielectric-loaded rectangular waveguide. 3 To obtain the simulations presented in this paper, a detailed 4 analysis of the dynamics of the electron inside this waveguide 5 has been performed, taking into account the radio frequency 6 electromagnetic fields propagating in the waveguide and the dc 7 electric field that appears because of the charging of the dielectric 8 layer. This electrostatic field is obtained by computing the electric 9 potential produced by an arbitrary charge distribution on the 10 dielectric layer in a dielectric-loaded waveguide. The electron 11 trajectory is then found by numerically solving the…
Multipactor RF Breakdown in Coaxial Transmission Lines With Digitally Modulated Signals
2016
The aim of this paper is the study of the RF multipactor breakdown in coaxial transmission lines excited by a single carrier with a digitally modulated signal. Employing an in-house developed code, numerical simulations are performed to determine the RF multipactor voltage threshold for several digitally modulated signals under different modulations schemes: quadrature phase-shift keying, 16-quadrature amplitude modulation, 16-amplitude and phase-shift keying, and 32-amplitude and phase-shift keying. Moreover, a coarse method based on the envelope integration to determine the RF multipactor voltage threshold when involving arbitrary digital modulations is also presented. These results are a…
High power analysis and design of dual-mode channel filters
2009
In this paper, we present two dual-mode channel filter topologies which are able to withstand more than 600 W in Ku-Band. The two different designs (one with elliptical cavities and the other one with rectangular cavities) implement the same transfer function: four order, elliptical response centered in 12 GHz, with 40 MHz bandwidth and two transmission zeros. It is shown that the critical dimensions for the power-handling of these filters are the dimensions of the input-output irises. In fact, in order to rigorously obtain these conclusions and to reach these high-power levels (including margins), it is essential to use the advanced numerical techniques described in the paper to predict th…
Multipactor Effect in a Parallel-Plate Waveguide Partially Filled With Magnetized Ferrite
2014
The aim of this paper is the analysis of the multipactor effect in a parallel-plate waveguide when a ferrite slab, transversally magnetized by a static magnetic field parallel to the waveguide walls, is present. Employing an in-house developed code, numerical simulations are performed to predict the multipactor radio frequency voltage threshold in such a ferrite-loaded waveguide. Variations of the ferrite magnetization field strength and the ferrite slab height are analyzed. Effective electron trajectories are also shown for a better understanding of the breakdown phenomenon, finding different multipactor regimes.
Multipactor Effect Characterization of Dielectric Materials for Space Applications
2018
[EN] The objective of this paper is to advance the state of the art in the characterization of the multipactor effect in dielectric materials. The materials studied are the most commonly used dielectrics in space applications, namely, Alumina, Rexolite, Rogers RT5870, Rohacell, Teflon, and Ultem 1000. In this paper, a new family of coaxial waveguide components, covering the L- and S-bands, with a wideband, low-pass response has been designed, and six different prototypes have been specifically optimized and manufactured. The six prototypes have then been used to simulate and measure the multipactor breakdown susceptibility charts for the six dielectric materials investigated. Finally, the s…
Multipactor Mitigation in Coaxial Lines by Means of Permanent Magnets
2014
The main aim of this paper is the analysis of the feasibility of employing permanent magnets for the multipactor mitigation in a coaxial waveguide. First, the study of a coaxial line immersed in a uniform axial magnetic field shows that multipactor can be suppressed at any RF if the external magnetic field is strong enough. Both theoretical simulations and experimental tests validate this statement. Next, multipactor breakdown of a coaxial line immersed in a hollow cylindrical permanent magnet is analyzed. Numerical simulations show that multipactor can be suppressed in a certain RF range. The performed experimental test campaign demonstrates the capability of the magnet to avoid the multip…