Search results for "PAPER"
showing 10 items of 2166 documents
Shortcut nitrification-denitrification by means of autochthonous halophilic biomass in an SBR treating fish-canning wastewater
2017
Abstract Autochthonous halophilic biomass was cultivated in a sequencing batch reactor (SBR) aimed at analyzing the potential use of autochthonous halophilic activated sludge in treating saline industrial wastewater. Despite the high salt concentration (30 g NaCl L −1 ), biological oxygen demand (BOD) and total suspended solids (TSS), removal efficiencies were higher than 90%. More than 95% of the nitrogen was removed via a shortcut nitrification-denitrification process. Both the autotrophic and heterotrophic biomass samples exhibited high biological activity. The use of autochthonous halophilic biomass led to high-quality effluent and helped to manage the issues related to nitrogen removal…
The effect of the solids and hydraulic retention time on moving bed membrane bioreactor performance
2018
Abstract The aim of the present paper was to investigate the effect of solids (SRT) and hydraulic (HRT) retention time on Integrated Fixed Film Activated Sludge (IFAS) University of Cape Town (UCT) membrane Bioreactor (MBR). In particular, three different pairs of SRT and HRT values were analysed, namely, Phase I 56 d/30 h, Phase II 31 d/15 h and Phase III 7 d/13 h. The short-term effect of these three SRT/HRT conditions was assessed by analysing several system performance indicators: organic carbon and biological nutrient (nitrogen and phosphorus) removal, biomass respiratory activity, activated sludge filtration properties and membrane fouling. The results showed that the decrease of SRT/…
Enhanced nitrogen removal of low carbon wastewater in denitrification bioreactors by utilizing industrial waste toward circular economy
2020
Abstract Aquaculture needs practical solutions for nutrient removal to achieve sustainable fish production. Passive denitrifying bioreactors may provide an ecological, low-cost and low-maintenance approach for wastewater nitrogen removal. However, innovative organic materials are needed to enhance nitrate removal from the low carbon effluents in intensive recirculating aquaculture systems (RAS). In this study, we tested three additional carbon sources, including biochar, dried Sphagnum sp. moss and industrial potato residues, to enhance the performance of woodchip bioreactors treating the low carbon RAS wastewater. We assessed nitrate (NO3−) removal and microbial community composition durin…
Employment status and occupational positions of childhood cancer survivors from Denmark, Finland and Sweden: A Nordic register-based cohort study fro…
2021
Background: A childhood cancer diagnosis and late effects of treatment may affect survivors' possibilities of employment or highly skilled occupations later in life. In this study, we compared the employment and occupational status of childhood cancer survivors with population comparisons and siblings.Methods: In a cohort study based on Nordic registers, we identified 10 461 survivors of childhood cancer diagnosed before age 20 years in Denmark, Finland and Sweden since 1971. Survivors were compared with 48 928 population comparisons matched to survivors by age, sex and geographical region and 12 605 siblings of survivors. Annual outcome information on employment, unemployment, health-relat…
Dehydrogenative Anodic C−C Coupling of Phenols Bearing Electron‐Withdrawing Groups
2019
Abstract We herein present a metal‐free, electrosynthetic method that enables the direct dehydrogenative coupling reactions of phenols carrying electron‐withdrawing groups for the first time. The reactions are easy to conduct and scalable, as they are carried out in undivided cells and obviate the necessity for additional supporting electrolyte. As such, this conversion is efficient, practical, and thereby environmentally friendly, as production of waste is minimized. The method features a broad substrate scope, and a variety of functional groups are tolerated, providing easy access to precursors for novel polydentate ligands and even heterocycles such as dibenzofurans.
Preliminary Results on the Use of Leather Chrome Shavings for Air Passive Sampling
2012
A new passive sampler based on low-density polyethylene (LDPE) layflat tube filled with chrome shavings from tannery waste residues was evaluated to determine volatile organic compounds (VOCs) in indoor and outdoor areas. VOCs were directly determined by head space-gas chromatography-mass spectrometry (HS-GC-MS) without any pretreatment of the sampler and avoiding the use of solvents. Limit of detection values ranging from 20 to 75 ng sampler−1and good repeatability values were obtained for VOCs under study with relative standard deviation values from 2.8 to 9.6% except for carbon disulfide for which it was 22.5%. The effect of the amount of chrome shavings per sampler was studied and resul…
3-Formyl-BODIPY Phenylhydrazone as a Chromo-Fluorogenic Probe for Selective Detection of NO2 (g)
2016
Anew colorimetric and fluorogenic probe,based on a3-formyl boron dipyrromethene (BODIPY)phe-nylhydrazone, for the sensitive and selectivedetectionNO2(g) has been prepared. The probeinsolution experi-ences aremarkablehypsochromic shift of its absorptionand fluorescence emission bands in the presence gaseousNO2(g), leading to limits of detectio noffew ppb. Theprobe also works in the solid phase, adsorbed on filterpaper strips, or chemically immobilized on the surfaceofsilica nanop articles, with limitsofdetection to the nakedeye of about 0.5 ppm.
Resin and fatty-acid analysis by solid-phase extraction coupled to atmospheric pressure chemical ionization–mass spectrometry
2007
Using gas-chromatographic analysis, the suitability of liquid–liquid extraction and solid-phase extraction (SPE) methods was studied for the rapid separation of resin and fatty-acid fractions from papermaking process waters. In the second phase of this study, a novel procedure (correlation coefficient >0.99 and repeatability RSD <8%) for on-line monitoring of selected individual acid components (limits of detection 11–78 µg L−1) by SPE combined with atmospheric pressure chemical ionization–mass spectrometry was developed. The suitability of this technique for quality control of papermaking process waters was tested by means of industrial samples. The method was also found suitable for the a…
Chlorinated acetic and propionic acids in pine needles from industrial areas
1998
Abstract Concentrations of chlorinated acetic and propionic acids in pine needles from the surroundings of a pulp and paper mill and a metal reclamation plant were measured. Different ways of extraction and chromatographic separation were tried. Ultrasonic extraction with water of the powdered needles was found to be efficient. The acids were analysed as their pentafluorobenzyl esters with GC-ECD. The ECD sensitivity of the pentafluorobenzyl derivatives was good. The detection limit was below 1 ng/g for the chlorinated acetic and propionic acids. The concentrations of dichloroacetic acid and 2,2-dichloropropionic acid in fresh needles were on the 0–4 ng/g level. Monochloroacetic acid, 2-chl…
Antibody-Capped Mesoporous Nanoscopic Materials: Design of a Probe for the Selective Chromo-Fluorogenic Detection of Finasteride
2012
[EN] The synthesis of capped mesoporous silica nanoparticles (MSN) conjugated with an antibody (AB) as a gatekeeper has been carried out in order to obtain a delivery system able to release an entrapped cargo (dye) in the presence of a target molecule (antigen) to which the conjugated antibody binds selectively. In particular, MSN loaded with rhodamine B and functionalized on the external surface with a suitable derivative of N-(t-butyl)- 3-oxo-(5a,17b)-4-aza-androst-1-ene-17-carboxamide (finasteride) have been prepared (S1). The addition of polyclonal antibodies against finasteride induced capping of the pores due to the interaction with the anchored hapten-like finasteride derivative to g…