Search results for "PEDOT:PSS"
showing 10 items of 54 documents
Tenfold increase in efficiency from a reference blue OLED
2018
Abstract Starting from a reference single-layer light-emitting diode based on the blue phosphorescent bis-cyclometallated iridium complex FIrpic as guest, hosted in a PVK (non-conjugated poly(vynilcarbazole)) matrix, different strategies are followed to improve the efficiency of the devices through the combination of solution processed and evaporated layers. Injection of charges from the electrodes has been varied by using different conductive PEDOT: PSS as hole injection layer and a nanoscale Cs2CO3 interlayer as electron injection and hole-blocking film. Furthermore, a separated electron injection/hole blocking evaporated layer, TPBi or 3TPYMB, is introduced in double-layer devices to enh…
Manufacturing Te/PEDOT Films for Thermoelectric Applications
2017
In this work, flexible Te films have been synthesized by electrochemical deposition using PEDOT [poly(3,4-ethylenedioxythiophene)] nanofilms as working electrodes. The Te electrodeposition time was varied to find the best thermoelectric properties of the Te/PEDOT double layers. To show the high quality of the Te films grown on PEDOT, the samples were analyzed by Raman spectroscopy, showing the three Raman active modes of Te: E1, A1, and E2. The X-ray diffraction spectra also confirmed the presence of crystalline Te on top of the PEDOT films. The morphology of the Te/PEDOT films was studied using scanning electron microscopy, showing a homogeneous distribution of Te along the film. Also an a…
Inkjet Printable ZnO/PEDOT:PSS Heterojunction for Thin Flexible Semi-Transparent Optoelectronic Sensors
2020
International audience; Flexible sensors play an increasing role in printed electronics and are of interest for optoelectronic applications in flexible robotics and industrial automation. Thus, we have investigated the hybrid inorganic-organic junction between ZnO and PEDOT:PSS (poly(3,4-ethylenedioxythiophene) polystyrene sulfonate). A thin ITO (indium tin oxide) layer on PET (polyethylene terephthalate) foils was used as substrate electrode. ZnO was deposited from a nanoparticle (NP) suspension by electrophoretic deposition. For comparison, we have used three different methods for the deposition of PEDOT:PSS, namely (i) drop casting, (ii) dip-coating, (iii) inkjet printing. For the result…
Toward mass producible ordered bulk heterojunction organic photovoltaic devices.
2012
A strategy to fabricate nanostructured poly(3-hexylthiophene) (P3HT) films for organic photovoltaic (OPV) cells by a direct transfer method from a reusable soft replica mold is presented. The flexible polyfluoropolyether (PFPE) replica mold allows low-pressure and low- temperature process condition for the successful transfer of nanostructured P3HT films onto PEDOT/PSS-coated ITO substrates. To reduce the fabrication cost of masters in large area, we employed well-ordered anodic aluminum oxide (AAO) as a template. Also, we provide a method to fabricate reversed nanostructures by exploiting the self-replication of replica molds. The concept of the transfer method in low temperature with a fl…
Controlling dielectrical properties of polymer blends through defined PEDOT nanostructures
2016
[EN] The paper reports the crucial role of the morphology of poly(3,4-ethylenedioxythiophene) (PEDOT) nanostructures on the thermal and dielectric properties of polymer blends prepared thereof. PEDOT nanostructures with two different morphologies (nanoparticles and nanowires) were synthesized. The size for the nanoparticles was in the range 10 40 nm and the diameter of the nanowires was of ca. 200 nm. These nanostructures were blended with an insulating polymer matrix, poly(methyl methacrylate) (PMMA), to evaluate the dielectrical properties of the materials. The results of broadband dielèctric spectroscopy showed a strong correlation between the morphology of the nanostructure and the impr…
High Thermoelectric Power Factor Organic Thin Films through Combination of Nanotube Multilayer Assembly and Electrochemical Polymerization
2017
In an effort to produce effective thermoelectric nanocomposites with multiwalled carbon nanotubes (MWCNT), layer-by-layer assembly was combined with electrochemical polymerization to create synergy that would produce a high power factor. Nanolayers of MWCNT stabilized with poly(diallyldimethylammonium chloride) or sodium deoxycholate were alternately deposited from water. Poly(3,4-ethylene dioxythiophene) [PEDOT] was then synthesized electrochemically by using this MWCNT-based multilayer thin film as the working electrode. Microscopic images show a homogeneous distribution of PEDOT around the MWCNT. The electrical resistance, conductivity (σ) and Seebeck coefficient (S) were measured before…
PV and magnetic field effects in poly(3-hexylthiophene)-fullerene cells doped with phthalocyanine soluble derivative
2007
An attempt was made to widen the photosensitivity spectral range of poly(3-hexylthiophene)-fullerene blend by adding an extra electron donor — a newly synthesized soluble phthalocyanine derivative (SnClPc) having the electron absorption band at 708 nm. As the electron acceptor, home-synthesised di(ethoxycarbonyl) methano-fullerene carboxylate (C 61 (CO 2 Et) 2 ) was used, and as the hole transporter — the regioregular poly 3-hexylthiophene (P3HT). The sandwich-type samples were prepared on an ITO glass substrate by coating it with a 30–50 nm thick PEDOT:PSS layer followed by a ~100 nm thick P3HT:C 61 (CO 2 Et) 2 :SnClPc blend. For the top electrodes In or Au were used. Spectral dependences …
PV effect of fullerene/poly(3-hexylthiophene) blend sensitized by phthalocyanine having infrared absorption CT band
2008
An attempt was made to extend the photosensitivity spectral range of fullerene/poly(3-hexylthiophene) blend to NIR region by adding extra electron donor — hydroxygallium phthalocyanine (GaOHPc) with a strong and wide intermolecular charge transfer (CT) band around 830 nm. Multilayer cells of ITO/PEDOT: PSS/6 GaOHPc/P3HT: C61(CO2Et)2 have been prepared by spin coating with vacuum evaporated Al or In top electrodes. Significant photosensitivity of the cells was in 370–900 nm spectral range. However charge carrier photogeneration efficiency was 3 times higher for illumination in P3HT absorption band as compared with the GaOHPc CT band at 830 nm. But when GaOHPc was mixed in the blend forming P…
Characterization of thermoelectric and thermogravimetric properties of conductive PEDOT:PSS films blended with SWCNTs and PVA
2019
Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) was blended with polyvinyl alcohol (PVA) and single-walled carbon nanotube (SWCNT) filler to form composites with thermoelectric properties. Studied samples were obtained by drop coating and solution casting methods. Thermoelectric measurements of PEDOT:PSS demonstrated that the addition of 5 wt. % SWCNTs increased the Seebeck coefficient value from 8.0 μV/K to 23.6 μV/K, while in the case of PEDOT:PSS/PVA blended with 5 wt. % SWCNT Seebeck coefficient value of 20.3 μV/K was achieved. Thermogravimetric analysis showed slight SWCNT effect on thermal stability of the investigated systems.
Push‐Pull Design of Bis(tridentate) Ruthenium(II) Polypyridine Chromophores as Deep Red Light Emitters in Light‐Emitting Electrochemical Cells
2013
Light-emitting electrochemical cells (LECs) with a simple device structure were prepared by using heteroleptic bis(tridentate) ruthenium(II) complexes [1](PF6)(2)-[3](PF6)(2) as emitters. The push-pull substitution shifts the emission energy to low energy, into the NIR region. The devices emit deep red light up to a maximum emission wavelength of 755 nm [CIE (International Commission on Illumination) coordinates: x = 0.731, y = 0.269 for [3](PF6)(2)], which, to the best of our knowledge, is the lowest emission energy for LECs containing bis(tridentate) ruthenium(II) complexes. A device structure of ITO/PEDOT:PSS/ruthenium(II) complex/Ag was used, and the thickness of the emitting layer was …