Search results for "PHOTOELECTRON"
showing 10 items of 458 documents
Uptake of actinides by calcium silicate hydrate (C-S-H) phases
2018
Abstract The sorption of actinides (Th, U – Am) was studied in dependence of the solid-to-liquid (S/L) ratio (0.5–20.0 g/L) and the calcium-to-silicon (C:S) ratio. The C:S ratio was varied between 1.80 and 0.70 to simulate the changing composition of the C-S-H phases during cement degradation from high to low C:S ratios. The decrease of the calcium content in the C-S-H phases by time is accompanied by a decrease in pH in the corresponding suspensions from 12.6 to 10.2. X-ray photoelectron spectroscopy (XPS) of the C-S-H phases showed an increasing depletion of Ca on the surface with increasing C:S ratio in comparison to the composition of the solid phase as a whole. The sorption experiments…
Extruded Expanded Polystyrene Sheets Coated by TiO2 as New Photocatalitic Materials for Foodstuffs Packaging
2012
Nanostructured, photoactive anatase TiO2 sol prepared under very mild conditions using titanium tetraisopropoxide as the precursor is used to functionalise extruded expanded polystyrene (XPS) sheets by spray-coating resulting in stable and active materials functionalised by TiO2 nanoparticles. Photocatalytic tests of these sheets performed in a batch reactor in gas-solid system under UV irradiation show their successful activity in degrading probe molecules (2-propanol, trimethylamine and ethene). Raman spectra ensure the deposition of TiO2 as crystalline anatase phase on the polymer surface. The presence of TiO2 with respect to polymer surface can be observed in SEM images coupled to EDAX …
Tetrazine Click Chemistry for the Modification of 1-Hydroxy-1,1-methylenebisphosphonic Acids: Towards Bio-orthogonal Functionalization of Gold Nanopa…
2016
Inverse electron demand Diels-Alder (iEDDA) was evaluated for the functionalization of gold nanoparticles. The reaction was first modelled with the free coating molecule 1-hydroxy-1,1-methylenebisphosphonate bearing an alkene functionality (HMBPene). A model tetrazine 3,6-dipyridin-2-yl-1,2,4,5-tetrazine (pyTz) was used, kinetic of the reaction was calculated and coupling products were analysed by NMR and HRMS. The reaction was then transposed at the nanoparticle surface. Gold nanoparticles bearing an alkene functionality were obtained using a one-pot methodology with HMBPene and the tetrazine click chemistry was evaluated at their surface using pyTz. The successful coupling was assessed by…
Micropatterning of neurons using organic substrates in culture
1997
Abstract In this study, we have used spatially defined surfaces of organic thin films to micropattern the outgrowth of central nervous system neurons in culture. Glass substrates were first chemically modified with synthetic peptides derived from an extra-cellular matrix protein laminin to couple a functionality that promotes a neuron-substrate interaction. The modification procedure was verified using X-ray photoelectron spectroscopy. The functionality of the modified glass surfaces was examined by growing neurons dissociated from mammalian central nervous tissues in culture. Spatially defined surfaces of the peptide were then fabricated by selectively attaching the peptide to coplanar sur…
Switching of Polymer Brushes
1999
Polymer coatings of brushlike monolayers composed of two different polymers, polystyrene and poly(2-vinylpyridine), are grafted by radical polymerization on the surface of silicon wafers. Thickness, grafting density, molecular weight of grafted chains, and the composition of the coatings were regulated by grafting time, monomer concentration, and additional initiator in solution. A typical dry film thickness is between 10 and 100 nm, and the molecular weights of the components range from 100 to 300 kg/mol. The fabricated coatings turn out to be sensitive to the composition of the environment. For instance after exposition to toluene the layer becomes hydrophobic and the top of the layer is …
Synthesis and Characterization of the Hybrid Clay-Based Material Montmorillonite-Melanoidin: A Potential Soil Model
2010
The study of the interactions among metals, minerals, and humic substances is essential in understanding the migration of inorganic pollutants in the geosphere. A considerable amount of organic matter in the environment is associated with clay minerals. To understand the role of organic matter in the environment and its association with clay minerals, a hybrid clay-based material (HCM), montmorillonite (STx-1)-melanoidin, was prepared from L-tyrosine and L-glutamic acid by the Maillard reaction. The HCM was characterized by elemental analysis, nuclear magnetic resonance, x-ray photoelectron spectroscopy (XPS), scanning transmission x-ray microscopy (STXM), and thermal analysis. The presence…
Selective photocatalytic oxidation of 3-pyridinemethanol on platinized acid/base modified TiO2
2021
TiO2 catalysts, modified with acidic or alkaline solutions and then platinized, were used for the partial photocatalytic oxidation of 3-pyridinemethanol to 3-pyridinemethanal and vitamin B-3 under environmentally friendly conditions. The reaction took place in water under UVA light and air oxygen. Catalysts were characterized by TEM, photoluminescence, DRIFT-IR, Raman, DRS, XPS, and photocurrent measurements. The photocatalytic activity results show that Pt loading of untreated samples leads to a significant activity improvement (hence product yield) as much as acid and alkaline treatments do. Moreover, the alkaline treated TiO2 samples exhibit a further increase in activity after loading w…
Discrete bond model (DBM) of sodium silicate glasses derived from XPS, Raman and NMR measurements
1993
In sodium silicate glasses, the fraction of differently bound Si species Q[i] (i = 0−4), depending on the number i of bridging oxygens bound to the quarternary silicon, is a function of stoichiometry and the Na/Si ratio. Sodium silicate glasses were investigated by high resolution X-ray photoelectron spectroscopy. To explain the differences in chemical shifts and linewidths of the O 1s signal of the bridging and the non-bridging oxygen as a function of alkali concentration, and extended glass model was developed. This new model takes into account the influence of the alkali concentration on the Q[i] distribution and on the appearance and concentrations of differently bound bridging oxygens …
Amorphous Complexes MM (EDTA) (H2O)4 · 2H2O . LAXS and XPS Investigation of the Local Structure
1988
Abstract The amorphous MM (EDTA)(H2O)4·2 H2O (M = Ni,Co) substances are made up of infinite chains of alternating "hydrated" and "chelated" octahedra bridged by carboxylate groups: M(H2O)4 - M(EDTA)-M(H2O)4-... . XPS enables to ascertain that the coordination of the EDTA ligand in the amorphous phase is identical to that in the crystalline phase, i.e., hexacoordination toward the M atom and two bridging groups in the Ni -Ni, Co - Co compounds.
Structural characterization of U(VI) surface complexes on kaolinite in the presence of humic acid using EXAFS spectroscopy.
2007
To determine the influence of humic acid (HA), pH, and presence of atmospheric CO2 on the sorption of U(VI) onto kaolinite, the structure of the surface complexes was studied by U L III-edge extended X-ray absorption fine structure (EXAFS) spectroscopy. The best fits to the experimental EXAFS data were obtained by including two uranium coordination shells with two axial (O ax) and five equatorial (O eq) oxygen atoms at 1.77+/-0.02 and 2.34+/-0.02 A, respectively, and two coordination shells with one Al/Si atom each at 3.1 and 3.3 A. As in the case of the binary system U(VI)-kaolinite, uranium forms inner-sphere surface complexes by edge sharing with aluminum octahedra and/or silicon tetrahe…