Search results for "PLASTICS"
showing 10 items of 2724 documents
Green Composites Based on Mater-Bi® and Solanum lycopersicum Plant Waste for 3D Printing Applications
2023
3D printability of green composites is currently experiencing a boost in importance and interest, envisaging a way to valorise agricultural waste, in order to obtain affordable fillers for the preparation of biodegradable polymer-based composites with reduced cost and environmental impact, without undermining processability and mechanical performance. In this work, an innovative green composite was prepared by combining a starch-based biodegradable polymer (Mater-Bi®, MB) and a filler obtained from the lignocellulosic waste coming from Solanum lycopersicum (i.e., tomato plant) harvesting. Different processing parameters and different filler amounts were investigated, and the obtained sample…
Vanadium-based Ziegler-Natta catalyst supported on MgCl2(THF)2 for ethylene polymerization
1996
A supported magnesium‐vanadium‐aluminium catalyst was prepared by depositing –with the use of a milling technique–VOCl3 on the MgCl2(THF)2 support and subsequent activation with diethylaluminium chloride. Catalytic activity of the obtained system for ethylene polymerization was evaluated as a function of Mg/V and Al/V ratios as well as catalyst ageing time and polymerization temperature. High concentrations of THF in the catalytic system and considerable excess of an organoaluminium co‐catalyst were found to have no deactivating action on vanadium active sites. The catalyst obtained is stable and its activity for ethylene polymerization is high. It yields polyethylene with higher molecular …
Amino-Acid-Based Polymerizable Surfactants for the Synthesis of Chiral Nanoparticles
2016
Amino-acid-based chiral surfactants with polymerizable moieties are synthesized, and a versatile approach to prepare particles thereof with a chiral surface functionality is presented. As an example of an application, the synthesized particles are tested for their ability as nucleating agents in the enantioselective crystallization of amino acid conglomerate systems, taking rac-asparagine as a model system. Particles resulting from chiral surfactants with different tail groups are compared and the results demonstrate that only the chiral nanoparticles made of the polymerizable surfactant are able to act efficiently as nucleation agent in enantioselective crystallization.
Measurements on the temperature dependence of the cationic polymerization of styrene in CH2Cl2 with CF3SO3H as catalyst
1979
The cationic polymerization of styrene in CH2Cl2 with CF3SO3H as catalyst and at low monomer concentrations shows, at −15°C, −45°C and −60°C, the same formal dependence on monomer concentration. The dependence on the catalyst concentration is approximately but not exactly of a third order.
Effect of hydrogen on the ethylene polymerization process over Ziegler-Natta catalysts supported on MgCl2(THF)2. I. Studies of the chain-transfer rea…
2000
The effect of hydrogen on the molecular weight of polyethylene obtained over vanadium catalysts (based on VCl4 and VOCl3) supported on MgCl2(THF)2 was studied and the results were compared to those obtained for similar titanium catalysts. It was confirmed that the dependencies of the transfer reaction on the hydrogen concentration are a half-order in all investigated systems. However, the transition metal of the catalytic site affects the ratio of the transfer rate with hydrogen to the propagation rate (ktr,H/kp) and the results showed that hydrogen is a more effective agent of polyethylene molecular weight control in vanadium-based systems as compared to the titanium catalyst. © 2000 John …
Tailoring polymers through interplay of ligands within precatalysts: 8-(Nitro/benzhydryl-arylimino)-7,7-dimethyl-5,6-dihydroquinolylnickel halides in…
2017
A series of 8-(nitro/benzhydryl-substituted arylimino)-7,7-dimethyl-5,6-dihydroquinolines and the corresponding nickel halide complexes were synthesized and characterized. Molecular structures of representative nickel complexes were determined by single crystal X-ray diffraction, showing the dinuclear dimers with distorted square-pyramidal geometry around the nickel center. The binding energies determined by X-ray photoelectron spectroscopy (XPS) indicate the effective coordination between the sp2-nitrogen and nickel atoms as well as the influence of both the halogen ligands and the substituents within dihydroquinolines on the strength of the NiN bond. Ethylene polymerization with the nicke…
Nature of activating effect of two-step polymerization of propylene
1999
The prepolymerization effect on propylene polymerization in the presence of a TiCl 3 -based catalyst, modified by di-n-buthyl ether, was studied. The influence of prepolymerization on the electron spin resonance spectra and morphology of the catalyst, as well as the properties and the morphology of both prepolymer and regular polymerization products, was investigated. The polymer morphology was evaluated through scanning electron microscopy, polymer bulk density, and particle size distribution. Some evidence of the enhancement effect of prepolymerization on the catalyst activity and stereospecificity was obtained. No influence from prepolymerization was observed on molecular weight and its …
Synthesis of branched polyethylenes by the tandem catalysis of silica-supported linked cyclopentadienyl-amido titanium catalysts and a homogeneous di…
2003
The synthesis of branched polyethylenes by ethylene polymerization with new tandem catalyst systems consisting of methylaluminoxane-preactivated linked cyclopentadienyl-amido titanium catalysts [Ti(η5:η1-C5Me4SiMe2NR)Cl2 (R = Me or tBu)] supported on pyridylethylsilane-modified silica (PySTiNMe and PySTiNtBu) and homogeneous dibromo nickel catalyst having a pyridyl-2,6-diisopropylphenylimine ligand (PyminNiBr2) in the presence of modified methylaluminoxane was investigated. Ethylene polymerization with only PyminNiBr2 yielded a mixture of 1- and 2-olefin oligomers with methyl branches [weight-average molecular weight (Mw) ∼ 460)] with a ratio of about 1:7. By the combination of this nickel …
Novel organo-modifier for thermally-stable polymer-layered silicate nanocomposites
2015
A new novel approach for the stabilisation of polymer-clay nanocomposites has been investigated based on reacting chemically an antioxidant function, a hindered phenol moiety, with an organic modifier based on a quaternary ammonium salt. The chemically linked antioxidant-containing organic modifier (AO-OM) was then introduced into natural montmorillonite (MMt) through a cation-exchange reaction resulting in antioxidant-containing organo-modified clay (AO-OM-MMt). The new antioxidant-containing modified clay, along with other organo-modified clays having a similar organo-modifier but without the reacted antioxidant, were characterised by spectroscopic, thermogravimetric and x-ray diffraction…
Facile Synthesis of Fluorescent Polymer Nanoparticles by Covalent Modification-Nanoprecipitation of Amine-Reactive Ester Polymers
2015
Emission wavelength control in fluorescent nanoparticles (NPs) is crucial for their applications. In the case of inorganic quantum dots or dye-impregnated silica NPs, such a control is readily achieved by changing the size of the particles or choosing appropriate fluorescent dyes, respectively. A similar modular approach for controlling the emission wavelength of fluo-rescent polymer NPs, however, is difficult. This article reports on fluorescent polymer NPs, the synthesis of which provides a platform for a modular approach towards the preparation of fluorescent NPs of desired emission wavelength. Atom-transfer radical polymerization (ATRP) is employed to synthesize reactive ester polymers,…