Search results for "PLASTICS"
showing 10 items of 2724 documents
Achieving branched polyethylene waxes by aryliminocycloocta[b]pyridylnickel precatalysts: Synthesis, characterization, and ethylene polymerization
2017
Cycloocta[b]pyridin-10-one was prepared to form the corresponding imino derivatives, which then reacted with (DME)NiBr2 to form 10-aryliminocycloocta[b]pyridylnickel bromides (Ni1–Ni5). The new compounds were characterized by means of FT-IR spectroscopy as well as elemental analysis and the organic ligands were also analyzed by the NMR measurements. Furthermore, the molecular structure of a representative complex Ni3 was determined by the single crystal X-ray diffraction, indicating the distorted tetrahedral geometry around the nickel atom. Upon the activation with either methylaluminoxane (MAO) or diethylaluminium chloride (Et2AlCl), the title nickel complexes exhibited high activity in et…
Fabrication of silver nanoparticles by a diethylene triamine-hyaluronic acid derivative and use as antibacterial coating
2022
In this work a synthetic protocol for the functionalization of hyaluronic acid with diethylenetriamine (DETA) was standardized. HA-DETA derivatives were characterized by NMR and proton carbon correlation analysis HSQC and HMBC to confirm chemical structure. A selected derivative was used to set up a green fabrication procedure for HA-DETA capped silver nanoparticles with the aim to achieve a polymeric based coating with potential application in the treatment of medical devices associated infections. Data from UV-visible spectroscopy, electron scanning and transmission microscope (STEM), photoelectric spectroscopy (XPS) and rheological characterization were combined to characterize the HA-DE…
Numerical analysis of density gradient centrifugation profiles from eukaryotic DNA
1990
A numerical method for the deconvolution of superimposed Gaussian distributions with a unique solution has been proposed by Medgyessy [10]. We have tested the usefulness of this method for the analysis of density gradient centrifugation profiles from eukaryotic DNA, which are normally composed from overlapping Gaussian distributed profiles of several subcomponents with different mean buoyant densities. From the analysis of human DNA and from model calculations we conclude that major subcomponents can be identified by this method, if they differ in their buoyant density by approximatly 0.005 g/ml. Minor components can only be identified if the total DNA has been fractionated according to buo…
Mechanical and thermal behaviour of networks with “flexible” and “rigid” chains
1996
“Rigid-rod” telechelics were synthesized via repetitive Diels-Alder reaction of biscyclohexadienes and bis(1,2,4-triazoline-3,5-diones). The bistriazolinediones were used in slight excess. The rigidity of the building blocks and the molecular weight were varied. Various amounts of these reactive telechelics are used to crosslink cis-1,4-polybutadiene. The mechanical and the thermal properties of these two-component networks were investigated by stress-strain, differential scanning calorimetry and dynamic-mechanical measurements. The occurrence of microphase separation between the “rigid” and the “flexible” components is discussed to explain the properties of these materials.
X-ray study of LB multilayers of cadmium soaps in the vicinity of the break up point
1991
Temperature dependent SAXS measurements were carried out on multilayers of two different salts, cadmium palmitate (hexadecanoate) and behenate (docosanoate). The pattern characteristic of layer structure disappears at a transition temperature well below the bulk melting point in both cases. Examination by means of optical microscopy shows that the LB films break up at a temperature close to this transition. Measurements in its vicinity demonstrate that over a certain temperature range just below the transition a second set of peaks arises in the diffraction pattern. During this transition region of about 3 °C width two d-spacings for both salts were found, suggesting the simultaneous existe…
Wide-range cooling characteristics of a selected isotactic polypropylene
1997
Abstract An increased knowledge of polymer crystallization kinetics and its effect on the crystalline structure is of particular importance at high cooling rates. The aims of this study were to explore the range of utility and complementarity of various methods (densitometry, microscopy, wide-angle x-ray diffraction [WAXD], and small-angle light scattering [SALS]) on the characterization of the crystalline structure of a high purity isotactic polypropylene (PP) in a wider cooling range than previously obtainable and to identify characteristic ranges of the structure as a function of cooling rate. High cooling rates, ranging to nearly 1000°C/sec, were obtained using a special quench device. …
Short and long range order of Half-Heusler phases in (Ti,Zr,Hf)CoSb thermoelectric compounds
2016
Abstract The structural properties of (Ti,Zr,Hf)CoSb thermoelectric Half-Heusler compounds were investigated by synchrotron radiation based techniques. The short-range order, in particular the environment of the Co atoms, was studied by extended X-Ray absorption fine structure spectroscopy and the long range order by powder X-Ray diffraction. Structural models were obtained for the single phase materials TiCoSb0.85Sn0.15, ZrCoSb0.85Sn0.15, and HfCoSb0.85Sn0.15. These models were transferred for the phase-separated material Ti0.5Hf0.5CoSb0.85Sn0.15. As a result, proving that each Half-Heusler phase was well ordered, apart from the intermixing of Ti and Hf on its designated crystallographic l…
Crystallization kinetics of iPP: Influence of operating conditions and molecular parameters
2007
An analysis of the crystallization kinetics of different grades of isotactic polypropylene (iPP) is here presented. To describe the crystallization kinetics as a function of molecular and operating parameters, the methodological path followed was the preparation of quenched samples of known cooling histories, calorimetric crystallization isotherms tests, differential scanning calorimetry cooling ramps, wide angle X-ray diffraction (WAXD) measurements, and density determination. The WAXD analysis performed on the quenched iPP samples confirmed that during the fast cooling at least a crystalline structure and a mesomorphic one form. The diffractograms were analyzed by a deconvolution procedur…
Solidification of syndiotactic polystyrene by a continuous cooling transformation approach
2007
Syndiotactic polystyrene (sPS) was solidified from the melt under drastic conditions according to a continuous cooling transformation methodology developed by the authors, which covered a cooling rate range spanning from approximately 0.03 to 3000 °C/s. The samples produced, structurally homogeneous across both their thickness and surface, were analyzed by macroscopic methods, such as density, wide-angle X-ray diffraction (WAXD), and microhardness (MH) measurements. The density was strictly related to the phase content, as confirmed by WAXD deconvolution. The peculiar behavior encountered (the density first decreasing and then increasing with the cooling rate) was attributed to the singular…
In situ synchrotron characterization of mechanically activated self-propagating high-temperature synthesis applied in Mo–Si system
1999
Abstract An original experiment was designed to monitor structural and thermal evolutions during the MASHS (Mechanically Activated Self-propagating High-temperature Synthesis) process in the Mo–Si system. Time-Resolved X-Ray Diffraction (TRXRD) coupled with an infrared imaging technique was performed to study, in situ, the formation of the α-MoSi2 phase in the combustion front. Despite a temporal resolution of 50 ms between two consecutive diffractograms, no intermediate phase was observed during the passage of the combustion front. The only reaction responsible for the self-sustentation is Mo+2Si→MoSi2 in the primary zone inside the combustion wave. The mechanical activation was found to i…