Search results for "POLARITON"
showing 10 items of 162 documents
Analysis of the angular acceptance of surface plasmon Bragg mirrors
2007
International audience; We analyze an important aspect of the behavior of surface plasmon polariton (SPP) Bragg mirrors: the dependence of the angular acceptance for reflection on the incidence angle. By means of leakage radiation microscopy, both in direct and Fourier space, we observe that the angular acceptance diminishes for increasing incidence angles. This effect, which can considerably affect the design of devices based on these elements, is shown to be the consequence of the decrease of the bandgap width with increasing incidence angle. (c) 2007 Optical Society of America.
Dielectric-loaded plasmonic waveguide-ring resonators
2009
International audience; Using near-field microscopy, the performance of dielectric-loaded plasmonic waveguide-ring resonators (WRRs) operating at telecom wavelengths is investigated for various waveguide-ring separations. It is demonstrated that compact ( footprint similar to 150 mu m(2)) and efficient ( extinction ratio similar to 13 dB) WRR-based filters can be realized using UV-lithography. The WRR wavelength responses measured and calculated using the effective-index method are found in good agreement. (c) 2009 Optical Society of America
Bend- and splitting loss of dielectric-loaded surface plasmon-polariton waveguides.
2008
International audience; The design, fabrication, characterization, and modeling of basic building blocks of plasmonic circuitry based on dielectric- loaded surface polariton waveguides, such as bends, splitters, and Mach- Zehnder interferometers are presented. The plasmonic components are realized by depositing subwavelength dielectric ridges on a smooth gold film using mass-production- compatible UV-photolithography. The near-field characterization at telecommunication wavelengths shows the strong mode confinement and low radiation and bend losses. The performance of the devices is found in good agreement with results obtained by full vectorial three-dimensional finite element simulations.…
Surface plasmon routing along right angle bent metal strips
2005
International audience; An efficient routing of surface plasmon polaritons (SPP) is of fundamental importance in the development of SPP-based photonics. This paper reports that microgratings acting as Bragg mirrors can guide SPP along metal stripes waveguides featuring 90 degrees bents. The measurement of the mirrors efficiency, performed by means of photon scanning tunneling microscopy, shows that bent losses as low as 1.9 dB can be achieved. Finally, we demonstrate operating SPP beamsplitters obtained by an appropriate design of the Bragg mirrors constituting elements. (c) 2005 American Institute of Physics.
Near-field observation of surface plasmon polariton propagation on thin metal stripes
2001
International audience; We use a photon scanning tunneling microscope to probe the field of surface plasmon polariton modes excited on finite-width thin metal films (metal stripes). We first investigate the coupling between surface plasmons launched by a focused beam on a homogeneous thin film and the modes sustained by metal stripes of different widths. We show that. if the width of the metal stripe is about a few micrometers, a strong coupling with the stripe modes can be achieved at visible frequencies. A sharp transverse confinement of the field associated with the surface plasmon modes propagating on the metal stripe is unambiguously observed on the constant height photon scanning tunn…
Dielectric-loaded surface plasmon-polariton waveguides at telecommunication wavelengths: Excitation and characterization
2008
International audience; The excitation and propagation of strongly confined surface plasmon-polariton (SPP) waveguide modes, supported by 500-nm-wide and 550-nm-high dielectric ridges fabricated on smooth gold films, are investigated at telecommunication wavelengths using a scanning near-field optical microscope. Different tapering structures for coupling of SPPs, excited at bare gold surfaces, into dielectric-loaded SPP waveguide (DLSPPW) modes are considered. The DLSPPW mode confinement and propagation loss are characterized. The DLSPPW mode propagation along an S bend having the smallest curvature radius of 2.48 mu m is shown, demonstrating the potential of DLSPPW technology for the real…
Analysis of the Bloch mode spectra of surface polaritonic crystals in the weak and strong coupling regimes: grating-enhanced transmission at oblique …
2004
The Bloch mode spectrum of surface plasmon polaritons (SPPs) on a finite thickness metal film has been analyzed in the regimes of weak and strong coupling between SPP modes on the opposite film interfaces. The SPP mode dispersion and associated field distributions have been studied. The results have been applied to the description of the light transmission through thick and thin periodically structured metal films at oblique incidence. In contrast to normal incidence, all SPP Bloch modes on a grating structure participate in the resonant photon tunnelling leading to the transmission enhancement. However, at the angle of incidence corresponding to the crossing of different symmetry film SPP …
Excitation and characterization of dielectric-loaded surface plasmon-polariton waveguides at telecommunication wavelengths - art. no. 69880T
2008
International audience; The excitation of surface plasmon-polariton (SPP) waveguide modes in 500-nm-wide and 550-nm-high dielectric ridges deposited on a thin gold film is characterized at telecommunication wavelengths, by application of a scanning near-field optical microscope (SNOM), and by utilizing the finite element method (FEM). Different tapering structures for coupling in SPPs, excited at the bare gold-air interface, are investigated with a SNOM, and the dependence of in coupling efficiency on tapering length is characterized by means of FEM calculations. The performance of this in coupling method is compared to an alternative excitation scheme, where the effective index of SPPs in …
Experimental demonstration and numerical study of plasmon-soliton waves
2019
Merging the fields of plasmonics and nonlinear optics authorizes a variety of fascinating and original physical phenomena. In this work, we specifically study the combination of the strong light confinement ability of surface plasmon polaritons (SPP) with the beam self-trapping effect in a nonlinear optical Kerr medium. Although this idea of plasmon-soliton has been the subject of numerous theoretical papers since the eighties [1–4], up to now, no experimental evidence had been revealed yet. In the present study, a proper structure (Fig. 1a) has been designed and fabricated allowing the first experimental demonstration of these hybrid nonlinear waves merging spatial solitons and SPP. To be …
Discontinuity induced angular distribution of photon plasmon coupling
2011
Metal-dielectric transitions are important structures that can display a host of optical characteristics including excitation of plasmons. Metal-dielectric discontinuities can furthermore support plasmon excitation without a severe condition on the incident angle of the exciting photons. Using a semi-infinite thin gold film, we study surface plasmon (SP) excitation and the associated electromagnetic near-field distribution by recording the resulting plasmon interference patterns. In particular, we measure interference periods involving SPs at the scanable metal/air interface and the buried metal/glass one. Supported by optical near-field simulations and experiments, we demonstrate that the …