Search results for "POROSITY"
showing 10 items of 599 documents
A new biodegradable and biocompatible hydrogel with polyaminoacid structure
2007
The preparation and physicochemical and biological characterization of a novel polyaminoacid hydrogel have been reported. The ,-poly(N-2- hydroxyethyl)-dl-aspartamide (PHEA) has been used as a starting polymer for a derivatization reaction with methacrylic anhydride (MA) to give rise to the methacrylate derivative named PHM. Photocrosslinking of PHM has been performed in aqueous solution at 313 nm and in the absence of toxic initiators. PHM-based hydrogel has been characterized by scanning electron microscopy, X-ray diffractometry, swelling measurements in aqueous media; the degradation of PHM-based hydrogel has been evaluated as a function of time in the absence or in the presence of ester…
In vitro degradation of porous PLLA/pearl powder composite scaffolds
2013
Abstract The in vitro degradation behavior of poly- l -lactide (PLLA), PLLA/aragonite pearl powder and PLLA/vaterite pearl powder scaffolds was investigated. The scaffolds were soaked in phosphate buffer solution (PBS) up to 200 days. Scanning electron microscopy (SEM), gel permeation chromatography (GPC), and differential scanning calorimetry (DSC) were used to observe any degradation of the scaffolds. Degradation behaviors such as changes in pH, porosity, bulk density, water absorption, weight loss and mechanical properties were discussed. The results show that a gradual increase of the pH in composite scaffolds can decrease the rate of hydrolysis of PLLA. PLLA/vaterite and PLLA/aragonite…
Acoustic methods for measuring the porosities of porous materials incorporating dead-end pores
2013
International audience; The acoustic properties of porous materials containing dead-end (DE) pores have been proposed by Dupont et al. [J. Appl. Phys. 110, 094903 (2011)]. In the theoretical description, two physical parameters were defined (the dead-end porosity and the average length of the dead-end pores). With the knowledge of the open porosity (measured with non-acoustic methods), and the measurement of kinematic porosity (also called the Biot porosity in this article), it is possible to deduce the dead-end porosity. Two acoustic methods for measuring the Biot porosity for a wide range of porosities are proposed. These methods are based on acoustic transmission and on the low and high …
Synthesis of Mesoporous Supraparticles on Superamphiphobic Surfaces
2015
A method for mesoporous supraparticle synthesis on superamphiphobic surfaces is designed. Therefore, supraparticles assembled with nanoparticles are synthesized by the evaporation of nanoparticle dispersion drops on the superamphiphobic surface. For synthesis, no further purification is required and no organic solvents are wasted. Moreover, by changing the conditions such as drop size and concentration, supraparticles of different sizes, compositions, and architectures are fabricated.
Impact of wheeled and tracked tractors on soil physical properties in a mixed conifer stand
2016
Abstract: Damage to forest soil caused by vehicle traffic mainly consists of soil compaction, displacement, and rut formation. Severity of the damage depends on vehicle mass, weight of the carried loads, ground morphology, and soil properties, such as moisture. This paper investigates the impacts of two types of vehicles (tracked or wheeled tractor), traffic intensities (one or five skidding cycles) and soil moisture (24% or 13% by weight) on compaction of a loam textured soil in a mixed conifer stand of central Italy. Changes in porosity, bulk density, shear and penetration resistances were analyzed. The latter three parameters were significantly higher in the trafficked soil portions than…
Neptunium(V) Sorption and Diffusion in Opalinus Clay
2009
The sorption and diffusion behavior of 8 x 10(-6) M Np(V) in Opalinus Clay (OPA) with synthetic pore water (pH 7.6) as mobile phase was studied under ambient conditions by batch and diffusion experiments, respectively. The Kd value determined by batch experiments with OPA suspensions is equal to 0.025 +/- 0.005 m3/kg. The diffusion-accessible porosity epsilon of intact OPA as determined by through- and out-diffusion experiments with tritiated water (HTO) is equal to 0.15 +/- 0.01. The diffusion coefficient De and the rock capacity factor alpha of 22Na+ in OPA were measured by through-, out-, and in-diffusion experiments and asserted the reliability of these diffusion techniques. For the dif…
The use of soil water retention curve models in analyzing slope stability in differently structured soils
2017
Abstract This study analyzes whether and at what rate the parameterization of the Soil Water Retention Curve (SWRC) affects the analysis of shallow slope stability for differently structured unsaturated soils. Advanced empirical or physically-based equations of SWRCs have been proposed in literature to describe soil systems characterized by the so-called bimodal porous domain. In unsaturated soils, SWRC affects the stability assessment in two ways. It influences the resistance properties in terms of shear strengths, which depend on the soil water suction; and it affects the hydrological process modeling (e.g. infiltration) directly influencing soil moisture patterns and indirectly influenci…
Superconducting properties of Nb thin films deposited on porous silicon templates
2008
Porous silicon, obtained by electrochemical etching, has been used as a substrate for the growth of nanoperforated Nb thin films. The films, deposited by UHV magnetron sputtering on the porous Si substrates, inherited their structure made of holes of 5 or 10 nm diameter and of 10 to 40 nm spacing, which provide an artificial pinning structure. The superconducting properties were investigated by transport measurements performed in the presence of magnetic field for different film thickness and substrates with different interpore spacing. Perpendicular upper critical fields measurements present peculiar features such as a change in the H_c2(T) curvature and oscillations in the field dependenc…
CEC column behaviour of butyl and lauryl methacrylate monoliths prepared in non-aqueous media
2009
Polymeric monolithic stationary phases for capillary electrochromatography were prepared using two bulk monomers, butyl methacrylate (BMA) and lauryl methacrylate (LMA), by in situ polymerization in non-aqueous media. The effect of 1,4-butanediol/1-propanol ratio on porous properties was investigated separately for each monomer, keeping the proportion of monomers to pore-forming solvents fixed at 40:60 wt:wt. Also, mixtures of BMA and LMA at different 1,4-butanediol/1-propanol ratios were studied for tailoring the morphological features of the monolithic columns. The chromatographic performance of the different columns was evaluated by means of van Deemter plots of polycyclic aromatic hydro…
Adsorbents and columns in analytical high-performance liquid chromatography: A perspective with regard to development and understanding
2012
A brief historical survey is presented on the evaluation of silica adsorbents in analytical HPLC. The theory of analytical HPLC is mostly still being based on the height equivalent to a theoretical plate concept and the van Deemter equation that was derived from gas phase adsorption involving a linear adsorption isotherm and fast mass transfer kinetics. One can obviously wonder whether the use of the van Deemter equation is relevant and valid for the evaluation of the performance of HPLC systems, where most often the liquid solutes involve charged molecules in electrolytes and in very many cases the adsorbates are macromolecules having diffusion coefficients of small magnitude. Instead of t…