Search results for "PRI"
showing 10 items of 17196 documents
Consistent Clustering of Elements in Large Pairwise Comparison Matrices
2018
[EN] In multi-attribute decision making the number of decision elements under consideration may be huge, especially for complex, real-world problems. Typically these elements are clustered and then the clusters organized hierarchically to reduce the number of elements to be simultaneously handled. These decomposition methodologies are intended to bring the problem within the cognitive ability of decision makers. However, such methodologies have disadvantages, and it may happen that such a priori clustering is not clear, and/or the problem has previously been addressed without any grouping action. This is the situation for the case study we address, in which a panel of experts gives opinions…
Enhancing the sound absorption of small-scale 3D printed acoustic metamaterials based on Helmholtz resonators
2018
Acoustic metamaterials have recently become of interest for their ability to attenuate sound by breaking the mass-density law. In this paper, acoustic metamaterials based on Helmholtz resonators and capable of attenuating sound up to 30 dB are fabricated for sound absorption applications in the small scale. The proposed metamaterials are subwavelength at a factor of $\lambda /12$ with respect to the lateral dimension of the units. The directional response due to the position of the acoustic source on the sound attenuation provided by the metamaterial is investigated by controlling the location of a loudspeaker with a robot arm. To enhance and broaden the absorption bands, structural modific…
Modeling of an active torsion bar automotive suspension for ride comfort and energy analysis in standard road profiles
2019
Abstract Chassis technology is evolving towards active suspension, in which actuators can provide forces to each wheel individually. This overcomes the traditional trade-off between comfort and handling, at the expense of increased complexity and electric consumption. To reduce power demand, regenerative solutions capable of harvesting a certain amount of energy otherwise dissipated in vehicle suspensions and to enhance vehicle dynamics for improving ride comfort and road safety at the same time have been researched. In this paper, an active suspension based on a torsion bar is modeled and analyzed under the excitation from standardized road profiles according to the ISO 8608 norm. A skyhoo…
Towards a Reference Architecture for Archival Systems: Use Case With Product Data
2014
Long-term preservation of product data is imperative for many organizations. A product data archive should be designed to ensure information accessibility and understanding over time. Approaches, such as the Open Archival Information System Reference Model (OAIS RM) and the Audit and Certification of Trustworthy Digital Repositories (ACTDR), provide a framework for conceptually describing and evaluating archives. These approaches are generic and do not focus on particular contexts or content types such as product data. Moreover, these approaches offer no guidance on how to formally and comprehensively describe archival systems. Such descriptions should include the business activities that a…
Fractional-Order System Identification of Viscoelastic Behavior: A Frequency Domain Based Experimental Study
2020
In this work, the fractional-order modeling of viscoelastic behavior is investigated based on measurement data in the frequency domain. For the results of two different test setups we apply existing parameter estimation algorithms designed for fractional-order transfer functions. These algorithms require a priori knowledge of the system structure including the commensurate order of differentiation. An iterative procedure is used to evaluate the influence of the unknown structure. The measured polymer samples show a viscoelastic stress response. We can show that integer-order models are not capable of capturing this behavior. For a set of predefined structures, the best obtained fractional-o…
Energy demand reduction of aluminum alloys recycling through friction stir extrusion processes implementation
2019
Abstract Aluminum alloys are characterized by high-energy demands for primary production. Recycling is a well-documented strategy to lower the environmental impact of light alloys production. Despite that, conventional recycling processes are still energy-intensive with a low energy efficiency. Also, permanent material losses occur during remelting because of oxidation. Recently, several solid-state recycling approaches have been analyzed; in fact, by avoiding the remelting step both energy and material can be saved and, therefore, the embodied energy of secondary production can be substantially reduced. In this paper, the solid-state approach Friction Stir Extrusion (FSE) is analyzed for a…
Springback of thick sheet AHSS subject to bending under tension
2012
Lien vers la version éditeur : http://www.sciencedirect.com/science/article/pii/S0020740312000677 The springback behavior of four advanced high-strength sheet steels (Dual-Phase, TRIP, ferrite-bainite) with thicknesses ranging from 1.2 to 4 mm was investigated by means of the bending-under-tension (BUT) test. The applicability of several guidelines from the literature was investigated experimentally and numerically. The monotonic decrease of springback as back force increased was confirmed for this category of sheet steels, and a general trend for the non-linear influence of the tool radius was observed. The influence of numerical factors on the predicted values of springback was investigat…
A Pareto optimal design approach for simultaneous control of thinning and springback in stamping processes
2009
One of the most relevant research issues in automotive field is focused on the reduction of stamped parts weight also increasing their strength. In this way, a strong research effort is developed on high strength steels which are widely utilized and they require a proper springback control. Springback reduction in sheet metal forming is a typical goal to be pursued which is conflicting with thinning reduction for instance. Thus, such problems can be considered as multi-objective ones characterized by conflicting objectives. What is more, nowadays, a great interest would be focused on the availability of a cluster of possible optimal solutions instead of a single one, particularly in an indu…
Robustness with Respect to Delay Uncertainties of a Predictor-Observer Based Discrete-Time Controller
2006
This paper focuses on the delay-dependent stability problem of a discrete-time prediction scheme to stabilize possible unstable continuous-time systems. The delay-dependent stability condition is expressed in terms of LMIs. The separation principle between the proposed predictor and a state observer is also proved. The closed-loop system is shown to be robust with respect to uncertainties in the knowledge on the plant parameters, the delay and the sampling period. The proposed scheme has been tested in a real-time application to control the roll angle in a prototype of a quad-rotor mini-helicopter.
On the Heuristic Procedure to Determine Processing Parameters in Additive Manufacturing Based on Materials Extrusion
2020
We present a heuristic procedure for determining key processing parameters (PPs) in materials-extrusion-based additive manufacturing processes. The concept relies on a design-of-experiment approach and consists of eleven &ldquo