Search results for "Paramagnetic"
showing 10 items of 600 documents
Synthesis, characterisation, and molecular and electronic structure of CpMoCl2(R1C≡CR2) (R1, R2 = Ph, Et, Me): a new class of half-sandwich 17-electr…
2000
International audience; Addition of alkyne to [CpMoCl2]2 affords compounds CpMoCl2(η2-alkyne) (alkyne = EtC[triple bond, length as m-dash]CMe, 1; EtC[triple bond, length as m-dash]CEt, 2; PhC[triple bond, length as m-dash]CMe, 3; PhC[triple bond, length as m-dash]CPh, 4) in good yields. The compounds have been characterised by C,H analyses, IR, EPR and mass spectroscopies, magnetic susceptibility, and cyclic voltammetry. In addition, a single crystal X-ray diffraction analysis has been carried out for compound 4. The alkyne ligand adopts an almost parallel conformation relative to the Cp ring, essentially identical with that of previously reported Nb, Ta, and W analogues. Geometry optimisat…
Generation and Oligomerization of N-Ferrocenyl Ketenimines via Open-Shell Intermediates
2016
In the presence of oxidant (Ag[SbF6]) and base, N-ferrocenyl thioamide Fc-NHC(S)CH3 (H-1; Fc = Fe(η5-C5H5)(η5-C5H4)) converts in an unexpected multistep reaction sequence to a novel N,S-heterocyclic ring, which initiates an oligomerization reaction. Key intermediates toward the resulting complicated material are Ag6(1)6 silver clusters of the anionic N,S-chelating ligand 1− and EPR-active piano stool complexes resulting from ring-slipped cyclopentadienyl ligands, as well as electrophilic N-ferrocenyl ketenimine Fc-N═C═CH2 (2) and its ferrocenium cation 2•+ formed by hydrosulfide elimination. Mechanistic insight is achieved using X-ray diffraction and mass spectrometry, as well as EPR and NM…
Alkyl- and aryl-substituted corroles. 5. Synthesis, physicochemical properties, and X-ray structural characterization of copper biscorroles and porph…
2004
The synthesis and characterization of cofacial copper biscorroles and porphyrin-corroles linked by a biphenylenyl or anthracenyl spacer are described. The investigated compounds are represented as (BCA)Cu(2) and (BCB)Cu(2) in the case of the biscorrole (BC) derivatives and (PCA)Cu(2) and (PCB)Cu(2) in the case of porphyrin (P)-corrole (C) dyads, where A and B represent the anthracenyl and biphenylenyl bridges, respectively. A related monomeric corrole (Me(4)Ph(5)Cor)Cu and monomeric porphyrin (Me(2)Et(6)PhP)Cu that comprise the two halves of the porphyrin-corrole dyads were also studied. Electron spin resonance (ESR), (1)H NMR, and magnetic measurements data demonstrate that the copper corr…
New dinuclear copper complexes incorporating bis(imidazolyl) based ligands and bidentate–monodentate oxalate bridges. Crystal structure and magnetic …
2016
Abstract This paper reports the synthesis, X-ray crystal structure and magnetic characterization of two novel copper(II) dinuclear compounds including bis(imidazolyl) ligands and oxalate anions, [Cu2(BIM)2(C2O4)2]·4H2O (1) (BIM = bis(2-imidazolyl)methane) and [Cu2(BIK)2(C2O4)2] (2) (BIK = bis(2-imidazolyl)ketone). The oxalate anion acts as bidentate–monodentate in both cases, although it exhibits different coordination bridging modes: whereas in compound 1 a μ1,1,2-oxalato is observed, a μ1,2,3-oxalato is found in compound 2. In both cases, the 3D framework is held together by a combination of H-bonding and aromatic-aromatic interactions provided by the convenient structural features of BIM…
Growth and characterization of GdxHg1−xSe crystals
2008
Abstract The growth of GdxHg1−xSe crystals by the vertical Bridgman method was studied in the composition range 0⩽x⩽0.1. The structural and electronic properties of GdxHg1−xSe crystals were investigated as a function of composition. It was found that an increase in gadolinium content up to x=0.01 results in a decrease of structural defects and an increase in electron mobility up to the maximum value of μ77≈2.8×105 cm2/V s. Structural defects start to increase at x>0.01, and the formation of Gd2Se3 amorphous phase takes place at x>0.03. On the base of the electron-spin resonance investigation, it was shown that the Gd incorporates into the HgSe host in Gd3+ charge state at the concentration …
Elaboration and characterization of organic/inorganic hybrid nanoporous material incorporating Keggin-type Mo-Si polyanions
2007
A novel nanoporous (pore size of 11 nm in average, BET surface area of 30 m2/g, pore volume of 300 mm3/g) hybrid inorganic-organic material was synthesized using the solid-phase interaction at room temperature of plant-originated phenylpropanoid polymer lignin and a Keggin-type heteropolyanion [SiMo12O40]4-. The partly reduction of Mo(VI) to Mo(V) and complexes formation between lignin and polyanion have been established by EPR, FT-IR and Raman spectroscopy. The XRD pattern and FT-IR spectrum of the hybrid material and indicates that [SiMo12O40]4- anion maintains the Keggin structure.
An Unusual Geometry of Five-Coordinate Copper(II): The Structure of Cu(terpy)I2 and Spectroscopic Investigations of Complexes Cu(terpy)X2 (X: I, NCS)
1991
The structure of the compound Cu(terpy)I2 (terpy 2,2′: 6′, 2″ terpyridine) was determined at room temperature. It is monoclinic, space group I2/c with a = 13.689(3), b = 9.510(2), c = 11.605(3) Å, β = 97.59(4)° and Ζ = 4. The copper(II) ions are five-coordinated by the three nitrogen atoms from the terpy ligand and the two iodine atoms. The CuN3I2 polyhedron exhibits the same unusual “reverse” geometry as is observed for Cu(terpy)(NCS)2. Single crystal EPR measurements of the iodide and the isothio-cyanate complexes confirmed the structural results, excluding the possibility of a dynamically averaged geometry.
Comparison of spin density calculation methods for various alkyl-substituted 9,10-anthraquinone anion radicals in the solution phase
1996
EPR and ENDOR spectra were recorded for 2-methyl-9,10-anthraquinone (2-methylAQ), 2-ethylAQ, 2-tertbutylAQ and 2,3-dimethylAQ anion radicals in the solution phase. The EPR spectra were simulated with the help of ENDOR data. The experimental isotropic hyperfine coupling constants (IHFCs) were compared with calculated values from semi-empirical INDO, spin-restricted AM1/CI and B3PW91 density-functional methods. The best computational methods for the IHFCs were the semi-empirical AM1/CI method and the B3PW91 density-functional method with a large basis set.
Structural and magnetic properties of polynuclear oximate copper complexes with different topologies
2017
Abstract Two new copper(II) complexes containing the methyl(2-pyridyl)ketone oxime ligand (mpkoH) [Cu3(OH)(ClO4)2(mpko)3]·CH3OH (1) and [Cu(ClO4)(mpko)(mpkoH)]n (2) have been prepared from Cu(ClO4)2 and mpkoH in different metal-to-ligand molar ratios. In addition, the compound [Cu{(mpko)2BF2}(H2O)](BF4) (3) [(mpko)2BF2 is the fluoroboration product of the oxime] has been obtained when replacing Cu(ClO4)2 by Cu(BF4)2. Compound 1 is an isolated triangle with a {Cu3(µ3-OH)}5+ core, whereas 2 is a chain of CuII ions linked by anionic mpko− bridges. 1 exhibits strong antiferromagnetic competing interactions, as well as antisymmetric exchange. On the other hand, very weak ferromagnetic interactio…
Fast and continuous synthesis of nanostructured iron spinel in supercritical water: influence of cations and citrates
2014
International audience; Spinel iron oxide nanoparticles were obtained under supercritical water conditions in a continuous and fast (less than 10s) way by modifying the initial stoichiometric Fe II /Fe III molar ratio from (1/2) to (3/0), without base solution, and using citrates directly with iron precursors. This result opens the way of an economical and environmentally benign approach to synthesize superparamagnetic iron oxide nanoparticles (SPIONs) in important yields.