Search results for "Particle"
showing 10 items of 15225 documents
Multi-application Based Network-on-Chip Design for Mesh-of-Tree Topology Using Global Mapping and Reconfigurable Architecture
2019
This paper outlines a multi-application mapping for Mesh-of-Tree (MoT) topology based Network-on-Chip (NoC) design using reconfigurable architecture. A two phase Particle Swarm Optimization (PSO) has been proposed for reconfigurable architecture to minimize the communication cost. In first phase global mapping is done by combining multiple applications and in second phase, reconfiguration is achieved by switching the cores to near by routers using multiplexers. Experimentations have been carried out for several application benchmarks and synthetic applications generated using TGFF tool. The results show significant improvement in terms of communication cost after reconfiguration.
Fault-Tolerant Network-on-Chip Design for Mesh-of-Tree Topology Using Particle Swarm Optimization
2018
As the size of the chip is scaling down the density of Intellectual Property (IP) cores integrated on a chip has been increased rapidly. The communication between these IP cores on a chip is highly challenging. To overcome this issue, Network-on-Chip (NoC) has been proposed to provide an efficient and a scalable communication architecture. In the deep sub-micron level NoCs are prone to faults which can occur in any component of NoC. To build a reliable and robust systems, it is necessary to apply efficient fault-tolerant techniques. In this paper, we present a flexible spare core placement in Mesh-of-Tree (MoT) topology using Particle Swarm Optimization (PSO) by considering IP core failures…
Torus Topology based Fault-Tolerant Network-on-Chip Design with Flexible Spare Core Placement
2018
The increase in the density of the IP cores being fabricated on a chip poses on-chip communication challenges and heat dissipation. To overcome these issues, Network-onChip (NoC) based communication architecture is introduced. In the nanoscale era NoCs are prone to faults which results in performance degradation and un-reliability. Hence efficient fault-tolerant methods are required to make the system reliable in contrast to diverse component failures. This paper presents a flexible spare core placement in torus topology based faulttolerant NoC design. The communications related to the failed core is taken care by selecting the best position for a spare core in the torus network. By conside…
Impact of accumulated dust particles' charge on the photovoltaic module performance
2016
Abstract This work is focused on analysing effect of accumulated dust particles' charge on PV module performance. In the Dundee University's laboratory, dust particles have been created through epoxy powder and charged by using corona and tribo-electric charging methods by varying the charge levels of the accumulated dust particles. The PV module output has analysed for finding a relation between charge levels of the accumulated dust particles and its output voltage. Obtained experimental results have shown that charge level of accumulated dust particles on PV module's have significant impact on its output and dust particle accumulations are not associated with panel tilt angle.
Regarding the influence of the particle size of crumb rubber from waste rubber on the physical and mechanical characteristics of reclaimed rubber
2017
Thus, at present, a large amount of rubber waste cannot be higher harnessed due to recovery technologies used. Also, the requirements for new products of rubber worldwide are greater than the production capacity and the availability of raw materials. To offset this balance is necessary to improve technologies for recycling waste rubber so to can get regenerated rubber with the best mechanical physical characteristics. The main technology for obtaining the regenerated rubber is based on the rubber waste shredding and making the powder, so that it can be carried out de-vulcanization in autoclave. All the time it was monitored as the de-vulcanization process to be as economical and less pollut…
Visual tracking with omnidirectional cameras: an efficient approach
2011
International audience; An effective technique for applying visual tracking algorithms to omni- directional image sequences is presented. The method is based on a spherical image representation which allows taking into account the distortions and nonlinear resolution of omnidirectional images. Experimental results show that both deterministic and probabilistic tracking methods can effectively be adapted in order to robustly track an object with an omnidirectional camera.
Tracking Control of Networked Multi-Agent Systems Under New Characterizations of Impulses and Its Applications in Robotic Systems
2016
This paper examines the problem of tracking control of networked multi-agent systems with multiple delays and impulsive effects, whose results are applied to mechanical robotic systems. Four kinds of impulsive effects are taken into account: 1) both the strengths of impulsive effects and the number of nodes injected with impulses are time dependent; 2) the strengths of impulsive effects occur according to certain probabilities and the number of nodes under impulsive control is time varying; 3) the strengths of impulses are time varying, whereas the number of nodes with impulses takes place according to certain probabilities; 4) both the strengths of impulses and the number of nodes with imp…
Influence of friction stir processing conditions on the manufacturing of Al-Mg-Zn-Cu alloy/boron carbide surface composite
2018
Abstract Surface metal matrix composites were synthesized via friction stir processing (FSP) on the surface of aluminium alloy 7075 (AA 7075) sheets by incorporating B4C particles (B4CP). The influence of tool rotational speeds, powder particle sizes, and change in tool travel direction between FSP passes on particle distribution and resulting properties were studied in detail. Change in tool travel direction, decreased tool rotation speed and fine B4C particles enhanced B4CP distribution and wear properties thereof. Wear resistance of composites were doubled on account of the B4CP distribution and resultant several strengthening mechanisms.
Contactless generation of cavitation in high temperature liquid metals and its impact on particle dispersion in solidified iron and steel samples
2021
Abstract A recently developed method for the contactless magnetic generation of cavitation is demonstrated for high-melting-point metals. The approach is based on the floating-zone technique, which is truly contactless and crucible-free as it uses electromagnetic forces. Using this method, ultra-high-temperature ceramic particles, such as TiN, TiB2 and TiC, are admixed in liquid iron and 316L steel. The dispersion and particle refinement caused by cavitation treatment during melting and solidification are investigated. Magnetic fields up to 8 T that correspond to pressure oscillation amplitude of 0.83 MPa are used. The signal emitted by the collapsing bubbles is captured and visualized for …
Adjusted bat algorithm for tuning of support vector machine parameters
2016
Support vector machines are powerful and often used technique of supervised learning applied to classification. Quality of the constructed classifier can be improved by appropriate selection of the learning parameters. These parameters are often tuned using grid search with relatively large step. This optimization process can be done computationally more efficiently and more precisely using stochastic search metaheuristics. In this paper we propose adjusted bat algorithm for support vector machines parameter optimization and show that compared to the grid search it leads to a better classifier. We tested our approach on standard set of benchmark data sets from UCI machine learning repositor…