Search results for "Pavement"
showing 10 items of 115 documents
Feasibility of using more polishable aggregates in dense-graded asphalt surface mixture: Case study of dolomite
2022
This study aimed to evaluate the feasibility of using more dolomite aggregates in asphalt surface mixtures that are typically used by West Virginia Division of Highways (WVDOH). The laboratory test results indicated that increasing dolomite content in asphalt surface mixtures resulted in a faster deterioration rate at the early polishing stage. In addition, asphalt surface mixtures containing more than 50% dolomite coarse aggregates would significantly reduce roadway safety. The field test results validated that dolomite shall not exceed 50% of coarse aggregate in asphalt surface mixture if the projected traffic volume is greater than 3.0 million equivalent single axle loads (ESALs).
From Laboratory Mixes Evaluation to Full Scale Test: Fatigue Behavior of Bio-Materials Recycled Asphalt Mixtures
2020
The present paper describes the full-scale accelerated test, carried out on asphalt pavements made up with bio-materials, especially designed to help reusing Reclaimed Asphalt (RA) by re-activating the aged binder. Four pavement sections were evaluated: three pavement sections with innovative bio-materials (bio-recycled asphalt mixtures), and a reference section with a conventional, high modulus asphalt mix (EME2). In this study, fatigue resistance was first evaluated in laboratory, with two-points bending test, and then at full scale under heavy traffic loading, with the IFSTTAR accelerated pavement testing facility. The evolution of bio-materials recycled asphalt mixture characteristics, …
Towards a new mix design method for asphalt mixtures containing rap
2016
Recycling is one of the most important aspects to conceive the new construction or rehabilitation of sustainable road infrastructures. Even if Reclaimed Asphalt Pavement (RAP) is commonly used in the practice, its presence may lead to some critical aspects due to the physical and chemical phenomena occurring during the new mix process. For instance, the formation of RAP clusters during a new mix may inhibit the uniform distribution of the virgin binder as well as cause changes in the design grading curve of the mixture. Indeed, laboratory results demonstrate that small-size RAP particles stick together forming clusters. The amount of clusters depends on different parameters observed: The pe…
An ANN model to correlate roughness and structural performance in asphalt pavements
2017
Abstract In this paper, using a large database from the Long Term Pavement Performance program, the authors developed an Artificial Neural Network (ANN) to estimate the structural performance of asphalt pavements from roughness data. Considering advantages of modern high-performance survey devices in the acquisition of road pavement functional parameters, it would be of practical significance if the structural state of a pavement could be estimated from its functional conditions. To differentiate various road section conditions, several significant input parameters, related to traffic, weather, and structural aspects, have been included in the analysis. The results are very interesting and …
Automation of Optimized Gabor Filter Parameter Selection for Road Cracks Detection
2016
International audience; Automated systems for road crack detection are extremely important in road maintenance for vehicle safety and traveler's comfort. Emerging cracks in roads need to be detected and accordingly repaired as early as possible to avoid further damage thus reducing rehabilitation cost. In this paper, a robust method for Gabor filter parameters optimization for automatic road crack detection is discussed. Gabor filter has been used in previous literature for similar applications. However, there is a need for automatic selection of optimized Gabor filter parameters due to variation in texture of roads and cracks. The problem of change of background, which in fact is road text…
Binder design of high RAP content hot and warm asphalt mixture wearing courses
2015
Reclaimed Asphalt Pavement (RAP) has shown great potential for being used in the construction or maintenance of roads. However, RAP is usually downgraded to lower pavement layers and the percentage of RAP used in wearing courses is still moderate (≤30%). The research and results contained in this paper focus on the definition of binder recipes aimed at increasing the percentage of RAP in hot and warm mix asphalt wearing courses. A review of current internationally used blend design methodologies is presented followed by case studies aimed at defining binder recipes for high RAP content asphalt mixture wearing courses to be further used for mix design and production in asphalt plants. Binder…
A comparative life-cycle assessment of asphalt mixtures for railway sub-ballast containing alternative materials
2018
Abstract Bituminous sub-ballast in railway track-bed can mitigate the variation of the moisture content in the subgrade and reduce vertical stiffness variations of the track leading to a more durable infrastructure. Nevertheless, durability is only one of the aspects that affects the sustainability of an infrastructure. Other relevant aspects are related to the environmental and economic issues. This research work joins the worldwide effort towards a paradigm shift in civil engineering devoted to assess the sustainability of infrastructures at the design stage. With this in mind, in this study different alternative bituminous sub-ballast mixtures containing recycled materials, namely crumb …
Effect of two novel bio-based rejuvenators on the performance of 50% RAP mixes - a statistical study on the complex modulus of asphalt binders and as…
2019
An experimental study was conducted to evaluate the effectiveness of two bio-additives as rejuvenators on the properties of asphalt mixtures containing 50% RAP and their binder constituents containing 37% RAP binder. Before mixing, the rejuvenators were blended with fresh bitumen and the extracted and recovered RAP bitumen, and changes in the rheological properties of the binders were assessed using performance grading (PG) criteria. The results showed that both rejuvenators could improve the low-temperature performance of the aged RAP binder and restore its low-temperature properties. Master curves for the unaged, RTFO-aged, and PAV aged blends were constructed using both the Christensen-A…
Data Compression Approach for Long-Term Monitoring of Pavement Structures
2019
Pavement structures are designed to withstand continuous damage during their design life. Damage starts as soon as the pavement is open to traffic and increases with time. If maintenance activities are not considered in the initial design or considered but not applied during the service life, damage will grow to a point where rehabilitation may be the only and most expensive option left. In order to monitor the evolution of damage and its severity in pavement structures, a novel data compression approach based on cumulative measurements from a piezoelectric sensor is presented in this paper. Specifically, the piezoelectric sensor uses a thin film of polyvinylidene fluoride to sense the ener…
Full-scale validation of bio-recycled asphalt mixtures for road pavements
2019
Abstract Recycling of asphalt has become a well-established practice in many countries, however the road pavement industry remains a bulk consumer of extracted raw materials. Novel solutions that find root in circular economy concepts and life-cycle approaches are needed in order to enable optimisation of infrastructure resource efficiency, starting from the design stage and spanning the whole value chain in the construction sector. Itis within this framework that the present study presents a full-scale validation of asphalt mixtures specifically designed to ensure durability of flexible road pavements and at the same time enabling the reuse of reclaimed asphalt pavement (RAP) through the i…