Search results for "Physics::Accelerator Physics"
showing 10 items of 1235 documents
A Time Projection Chamber with GEM-Based Readout
2016
For the International Large Detector concept at the planned International Linear Collider, the use of time projection chambers (TPC) with micro-pattern gas detector readout as the main tracking detector is investigated. In this paper, results from a prototype TPC, placed in a 1 T solenoidal field and read out with three independent GEM-based readout modules, are reported. The TPC was exposed to a 6 GeV electron beam at the DESY II synchrotron. The efficiency for reconstructing hits, the measurement of the drift velocity, the space point resolution and the control of field inhomogeneities are presented.
Production of radioactive Ag ion beams with a chemically selective laser ion source
1997
Abstract We have developed a chemically selective laser ion source at the CERN-ISOLDE facility in order to study neutron-rich Ag nuclides. A pulsed laser system with high repetition rate has been used based on high-power coppe-vapour pump lasers and dye lasers. With this source significant reductions of the isobaric background has been achieved.
Laser preparation of bunched ion beams
1997
Abstract Laser ionization at ISOLDE is performed with high repetition laser beams in the ion source unit and for daughter elements with low repetition lasers synchronized with laser desorption from a secondary target. We are preparing an implementation of thermal adsorption followed by laser desorption and laser ionization in the target ion source unit of ISOLDE. The combination of resonance ionization with thermal bunching allows the preparation of bunched and chemically pure ion beams. Bunched ion beams of Mg or Ca are prepared for post-acceleration at REX-ISOLDE. In order to investigate the process of adsorption and pulsed laser desorption, experiments are performed with Ba vapour. In a …
Mainz/PSI Φ-factory design considerations
1991
Abstract Design considerations for a Φ-factory with a Luminosity of the order of 10 33 cm −2 s −1 lead to the concept of a multi-bunch round beam double storage ring with supercoducting solenoids for micro-beta focusing and beam rotation. Simulations of the beam-beam-interaction indicate, that significantly higher beam-beam-parameters may become possible with round beams. A rough draft design of a round beam Φ-factory is presented.
Searching for hidden sectors in multiparticle production at the LHC
2016
Most signatures of new physics in colliders have been studied so far on the transverse plane with respect to the beam direction. In this work however we study the impact of a hidden sector beyond the Standard Model (SM) on inclusive (pseudo)rapidity correlations and moments of the multiplicity distributions, with special emphasis in the LHC results.
Measurement of high energy resolution inelastic proton scattering at and close to zero degrees
2009
13 pages, 15 figures.-- Printed version published Jul 1, 2009.
The effects of beam line pressure on the beam quality of an electron cyclotron resonance ion source
2010
The results of a series of measurements studying the possibility to use neutral gas feeding into the beam line as a way to improve the quality of the heavy ion beams produced with an electron cyclotron resonance ion source (ECRIS) are presented. Significant reduction of the beam spot size and emittance can be achieved with this method. The observed effects are presumably due to increased space charge compensation degree of the ion beam in the beam line section between the ion source and the analyzing magnet. This is the region where the neutral gas was injected. It is shown that the effects are independent of the ion source tuning. Transmission measurements through the beam line and K-130 c…
A novel scheme for a highly selective laser ion source
2003
A new type of resonance ionization laser ion source, which shall combine the advantages of a laser ion source with those of an ion trap, is proposed. The primary purpose of such a laser ion source trap, which is based on a gas-filled linear radio-frequency quadrupole ion trap system, is the decoupling of evaporation and ionization processes. Furthermore optimum temporal control on the generated ion bunch is obtained. Both effects will lead to a significantly increased isobaric selectivity and ion beams of low emittance. A large variety of operational modes, ranging from quasi-dc to microseconds-bunched radioactive ion beams with variable pulse width and repetition rate, can be chosen freely…
A cylindrical Penning trap for capture, mass selective cooling, and bunching of radioactive ion beams
1997
Abstract A Penning trap ion accumulator, cooler, and buncher for low-energy ion beams has been developed for the ISOLTRAP mass spectrometer at ISOLDE/CERN. A cylindrical electrode configuration is used for the creation of a nested trapping potential. This is required for efficient accumulation of externally produced ions and for high-mass selectivity by buffer gas cooling. The design goal of a mass resolving power of about 1 × 10 5 has been achieved. Isobar separation has been demonstrated for radioactive rare-earth ion beams delivered by the ISOLDE on-line mass separator.
Laser ion source tests at the HRIBF on stable Sn, Ge and Ni isotopes
2006
Abstract As one step in the ion source development for the Rare Isotope Accelerator, a hot-cavity laser ion source using an all-solid-state titanium–sapphire laser system has been tested at the Holifield Radioactive Ion Beam Facility. Resonance ionization of stable isotopes of Sn, Ge and Ni has been studied in a Ta hot cavity. Efficient three step resonant ionization schemes applying frequency tripling for the first excitation step and using auto-ionizing or atomic Rydberg states in the ionizing step have been identified for all three elements, resulting in laser ion beams of typically around 100 nA. By saturating most of the optical excitation steps involved, ionization efficiencies of 22%…