Search results for "Physics::Medical Physics"

showing 10 items of 188 documents

Ge-doped silica nanoparticles: production and characterisation

2016

Silica nanoparticles were produced from germanosilicate glasses by KrF laser irradiation. The samples were investigated by cathodoluminescence and scanning electron microscopy, providing the presence of nanoparticles with size from tens up to hundreds of nanometers. The emission of the Germanium lone pair center is preserved in the nanoparticles and atomic force microscopy revealed the presence of no spherical particles with a size smaller than ~4 nm. The absorption coefficient enhancement induced by Ge doping is reputed fundamental to facilitate the nanoparticles production. This procedure can be applied to other co-doped silica materials to tune the nanoparticles features.

Materials scienceLaser ablationScanning electron microscopePhysics::Medical PhysicsDopingSettore FIS/01 - Fisica SperimentalePhysics::Opticschemistry.chemical_elementNanoparticleGermaniumCathodoluminescenceNanotechnology02 engineering and technologyChemical vapor deposition010402 general chemistry021001 nanoscience & nanotechnology01 natural sciences0104 chemical sciencesElectronic Optical and Magnetic MaterialsNanomaterialschemistryChemical engineeringnanoparticles point defects doped silica0210 nano-technology
researchProduct

Dynamical behaviour of pneumatic artificial muscles

2014

The mechanical response of pneumatic artificial muscles is analyzed in transient and periodic conditions, assuming the inextensibility of the sheathing fibres and considering the influence of the texture geometry, of the dissipation due to the mutual sliding between the braids and of the stress field inside the bladder thickness, where the constituent elastomer is regarded as a two-parameter Mooney–Rivlin material. The polytropic exponent of the thermodynamic air evolution inside the muscle during the charging and discharging phases may be properly chosen depending on the working frequency. The muscle end shape is taken into account profiling the meridian section by a simple m-degree parabo…

Materials scienceMechanical EngineeringPhysics::Medical PhysicsPolytropic processMechanicsDissipationCondensed Matter PhysicsElastomerSettore ING-IND/13 - Meccanica Applicata Alle MacchineStress fieldBio-robotics Pneumatic artificial muscle Dynamical behaviourPneumatic artificial musclesMechanics of MaterialsControl theoryExponentBraidExcitation
researchProduct

Induced attenuation in Ce3+ and Nd3+ doped fibers irradiated with electron beams under low dose regime

2005

Abstract In this paper, we study the feasibility of rare earth doped optical fibers as dosimeters based on the attenuation induced by electron beams under standard conditions in radiotherapy. Neodymium and cerium doped fibers have been irradiated with 10 MeV electrons, the radiation-induced loss and the dynamic response have been measured in the wavelength range 1200–1600 nm. The sensitivity of the fibers is of the order of 0.1 (dB/m)/Gy and has a linear dependence on the dose.

Materials scienceOptical fiberDosimeterbusiness.industryAttenuationPhysics::Medical PhysicsPhysics::Opticschemistry.chemical_elementRadiationNeodymiumAtomic and Molecular Physics and OpticsElectronic Optical and Magnetic Materialslaw.inventionCeriumOpticschemistrylawElectron beam processingCondensed Matter::Strongly Correlated Electronssense organsIrradiationElectrical and Electronic EngineeringPhysical and Theoretical ChemistrybusinessOptics Communications
researchProduct

Optical fiber diffusive tip designs for medical laser-lightguide delivery systems

1994

Medical laser radiation delivery instruments with diffusive tips on the distal ends of plastic-clad silica optical fibers have been designed, tested, and manufactured. The instruments are optimized for endoscopic, therapeutic, dermatologic and surgical laser treatment. The diffusive tips provide radial, cylindrical and aside-conical spatial distributions of the output radiation. Optical schemes concerning each type of the tip and the corresponding spatial distribution functions of the output radiation are presented and analyzed. Designs of the lightguide instruments for surgical and dermatological procedures demanding local high-power laser irradiation are also discussed.

Materials scienceOptical fiberHigh power lasersbusiness.industryLaser treatmentPhysics::Medical PhysicsPhysics::OpticsRadiationLaserlaw.inventionOpticslawFiber laserOptoelectronicsIrradiationbusinessSPIE Proceedings
researchProduct

Temperature Sensor Based on Colloidal Quantum Dots PMMA Nanocomposite Waveguides

2012

In this paper, integrated temperature sensors based on active nanocomposite planar waveguides are presented. The nanocomposites consist of cadmium selenide (CdSe) and cadmium telluride (CdTe) quantum dots (QDs) embedded in a polymethylmethacrylate (PMMA) matrix. When the samples are heated in a temperature range from 25$^{circ}{rm C}$ to 50 $^{circ}{rm C}$, the waveguided photoluminescence of QDs suffers from a strong intensity decrease, which is approximately quadratic dependent on temperature. Moreover, the wavelength peak of the waveguided emission spectrum of CdTe-PMMA shows a blue shift of 0.25 ${rm nm}/^{circ}{rm C}$, whereas it remains constant in the case of CdSe-PMMA. A temperature…

Materials sciencePhotoluminescencePhysics::Medical PhysicsPhysics::OpticsNanocompositesCondensed Matter::Materials Sciencechemistry.chemical_compoundTEORIA DE LA SEÑAL Y COMUNICACIONESColloidal quantum dots (QDs)Temperature sensorsEmission spectrumElectrical and Electronic EngineeringInstrumentationPolymethylmethacrylate (PMMA)Cadmium selenideCondensed Matter::Otherbusiness.industryQuantum dotsAtmospheric temperature rangeCondensed Matter::Mesoscopic Systems and Quantum Hall EffectCadmium telluride photovoltaicsBlueshiftOptical waveguideschemistryQuantum dotTemperature dependenceOptoelectronicsbusinessIntensity (heat transfer)
researchProduct

Study of the glow curves of TLD exposed to thermal neutrons.

2007

The glow curves of thermoluminescent dosimeters (TLD600, TLD700 and MCP), exposed to a mixed field of thermal neutrons and gamma photons are analysed. The fluence values of thermal neutrons used, comparable with those used in radiotherapy, allow one to define the reliability of the TLDs, in particular the most sensitive MCP, in this radiation field and to get information on the dose absorbed values. The glow curves obtained have been deconvoluted using general order kinetics and the observed differences for the different LET components have been analysed. In particular, the ratio of the n(0) parameter of two different peaks seems to allow to discriminate the different contributions of neutr…

Materials sciencePhotonHot TemperatureThermoluminescenceAstrophysics::High Energy Astrophysical PhenomenaPhysics::Medical PhysicsRadiation DosageThermoluminescenceFluenceSensitivity and SpecificityRadiation ProtectionDosimetryRadiology Nuclear Medicine and imagingNeutronComputer SimulationNeutron beamNeutronsRadiationDosimeterRadiological and Ultrasound Technologybusiness.industryPublic Health Environmental and Occupational HealthReproducibility of ResultsGeneral MedicineEquipment DesignModels TheoreticalSettore FIS/07 - Fisica Applicata(Beni Culturali Ambientali Biol.e Medicin)Neutron temperatureEquipment Failure AnalysisComputer-Aided DesignThermoluminescent DosimetryThermoluminescent dosimeterAtomic physicsNuclear medicinebusinessBeam (structure)Radiation protection dosimetry
researchProduct

CdTe Detectors

2014

Cadmium telluride (CdTe) compound semiconductors for x-ray detectors have experienced a rather rapid development in the last few years, due to their appealing performance. In this chapter we review the physical properties of semiconductor detectors for x-ray and γ ray spectroscopy. In particular, we focus on compound semiconductor detectors. We also review the principles of operation of both the semiconductor detectors and the electronic chains, with special emphasis on the digital techniques. CdTe detectors’ characteristics and performance enhancements are discussed in depth. Finally, we present some original results on CdTe detectors for medical applications.

Materials sciencePhysics::Instrumentation and DetectorsCondensed Matter::Otherbusiness.industryPhysics::Medical PhysicsDetectorSettore FIS/01 - Fisica SperimentaleCdte detectorCadmium telluride photovoltaicsSettore FIS/07 - Fisica Applicata(Beni Culturali Ambientali Biol.e Medicin)Semiconductor detectorCondensed Matter::Materials ScienceOptoelectronicsCompound semiconductorHigh Energy Physics::ExperimentbusinessSpectroscopyCdTe semiconductor detectors X-ray spectroscopy digital pulse processing medical applications
researchProduct

Positron lifetime measurements on neutron‐irradiated InP crystals

1996

Neutron‐irradiated InP single crystals have been investigated by positron‐lifetime measurements. The samples were irradiated with thermal neutrons at different fluences yielding concentrations for Sn‐transmuted atoms between 2×1015 and 2×1018 cm−3. The lifetime spectra have been analyzed into one exponential decay component. The mean lifetimes show a monotonous increase with the irradiation dose from 246 to 282 ps. The increase in the lifetime has been associated to a defect containing an Indium vacancy. Thermal annealing at 550 °C reduces the lifetime until values closed to those obtained for the as‐grown and conventionally doped InP crystals. navarrof@evalvx.ific.uv.es ; Jose.Ferrero@uv.es

Materials sciencePhysics::Instrumentation and DetectorsPhysics::Medical PhysicsAnalytical chemistryGeneral Physics and Astronomychemistry.chemical_elementDefect StructureMonocrystalsSpectral lineCondensed Matter::Materials Science:FÍSICA [UNESCO]Vacancy defectNeutronIrradiationIndium Phosphides ; Radiation Effects ; Thermal Neutrons ; Monocrystals ; Positron Probes ; Lifetime ; Defect StructureExponential decayPositron ProbesDopingRadiochemistryUNESCO::FÍSICANeutron temperatureRadiation EffectschemistryIndium PhosphidesThermal NeutronsLifetimeIndiumJournal of Applied Physics
researchProduct

Ion irradiation of carbon nanotubes encapsulating cobalt crystals

2008

Abstract The response of multi-walled carbon nanotubes encapsulating Co nanorods to ion irradiation was studied. The irradiation experiments with medium ion energies (40–500 keV) were carried out at high temperatures and combined with transmission electron microscopy and Raman characterization of the irradiated samples. Contrary to electron irradiation and high-energy (100 MeV) ion irradiation, we did not see accumulation of pressure inside irradiated nanotubes. We found that nanotubes with Co nanorods inside were transformed to amorphous carbon rods encapsulating Co clusters with typical diameters of 3–6 nm. As Co is magnetic, such one-dimensional composite systems could be used for variou…

Materials sciencePhysics::Instrumentation and DetectorsPhysics::Medical PhysicsNanotechnology02 engineering and technologyCarbon nanotube01 natural sciencesIonlaw.inventionCondensed Matter::Materials Sciencesymbols.namesakelaw0103 physical sciencesElectron beam processingIrradiation010306 general physics021001 nanoscience & nanotechnologyCondensed Matter PhysicsAtomic and Molecular Physics and OpticsElectronic Optical and Magnetic MaterialsAmorphous carbonChemical engineeringTransmission electron microscopysymbolsNanorod0210 nano-technologyRaman spectroscopyPhysica E: Low-dimensional Systems and Nanostructures
researchProduct

Second-harmonic Generation Microscopy of Carbon Nanotubes

2012

We image an individual single-walled carbon nanotube (SWNT) by second-harmonic generation (SHG) and transmission electron microscopy and propose that SHG microscopy could be used to probe the handedness of chiral SWNTs.

Materials sciencePhysics::Medical PhysicsPhysics::OpticsSecond-harmonic generationScanning gate microscopyNanotechnologyCarbon nanotubeSecond Harmonic Generation MicroscopyCondensed Matter::Mesoscopic Systems and Quantum Hall Effectlaw.inventionOptical properties of carbon nanotubesCondensed Matter::Materials ScienceTransmission electron microscopylawEnergy filtered transmission electron microscopyPhotoconductive atomic force microscopyConference on Lasers and Electro-Optics 2012
researchProduct