Search results for "Plastics"

Thermomechanical degradation of filled polypropylene

2003

The main problem in post-consumer plastics recycling is due to the thermomechanical stress acting on the melt during the reprocessing operations. The macromolecules break because of the temperature and of the mechanical stress. The extent of degradation is then correlated to the level of mechanical stress which, in turn, is proportional to the viscosity of the melt. The presence of fillers increases the viscosity of the polymers and then it is expected that the level of thermomechanical degradation of these systems is larger than that of the unfilled material. In this work the thermomechanical degradation kinetic of a polypropylene sample is investigated as a function of the calcium carbona…

Blends of polypropylene and nylon 6: Influence of the compatibilizer, molecular weight, and processing conditions

1993

The aim of this work is to study the influence of different types of compatibilizing agents, different processing conditions, and the molecular weight of the two components on the properties of immiscible blends of polypropylene and nylon 6. Increasing the content of the functional group of the modified polypropylene and the content of nylon in the blend, the effectiveness of the compatibilization improves. The same effect is observed by decreasing the molecular weight of the two components, in particular, that of the polyamide. The influence of the processing conditions is slight provided no degradation takes place during processing. © 1993 John Wiley & Sons, Inc.

Thermomechanical degradation of compatibilized and uncompatibilized nylon 6/polypropylene blends

1999

The thermomechanical degradation of compatibilized and uncompatibilized nylon 6/polypropylene blends has been followed to investigate the changes of structure, morphology and properties of these blends as a function of the type of compatibilizer and of the processing time. The degradation of the blends mostly depends on the type of functional group of the polypropylene. Indeed, the thermolability of an acrylic acid-functionalized polypropylene gives rise to a continuous decrease of the compatibilization efficiency and the properties of the blend with this polypropylene sample much worse than that observed for the blend with a maleic anhydride-functionalized polypropylene.

Some Features of Polymeric Membranes for Water Purification via Membrane Distillation

2011

Polymeric membranes are currently adopted in water purification processes, such as reverse osmosis (RO) and membrane distillation (MD). This latter technique is very promising for separation effectiveness and energy savings. A valuable and effective MD unit must be equipped with polymeric membranes that exhibit specific properties, for example, hydrophobicity, a narrow pore size range, a high water penetration pressure, and a large vapor permeability. In this work, we present and examine the main features of membranes for MD processes, with the aim of experimentally evaluating the related performances. Scanning electron microscopy analysis was carried out for a first estimate of the pore si…

Synthesis and characterization of redox-sensitive polyurethanes based on L-glutathione oxidized and poly(ether ester) triblock copolymers

2021

Abstract Segmented polyurethanes, based on PCL-PEG-PCL copolymers, 1,4-diisocyanatobutane and l -glutathione oxidized, used as chain extender, were synthetized. Three different reactions conditions were investigated using three different copolymers having ɛ-CL/polyethylene glycol molar ratios equal to 12, 24 and 36 and three different reaction conditions. As investigated by size exclusion chromatography analyses and quantification of l -glutathione, the polymerization and the extension phase's efficiency depended on the ɛ-CL/PEG ratio and the extension phase's operating temperature. Three selected polyurethanes were characterized by spectroscopic, differential scanning calorimetry (DSC) and…

Polyvinylpolypyrrolidone‐Stabilized Copper Nanoparticles as an Efficient and Recyclable Heterogeneous Catalyst for the Click of 1,2,3‐Triazoles in Wa…

2019

Evidence of Mechanisms Occurring in Thermally Induced Phase Separation of Polymeric Systems

2014

Thermally induced phase separation is a fabrication technique for porous polymeric structures. By means of easy-to-tune processing parameters, such as system composition and demixing temperature, a vast latitude of average pore dimensions, pore size distributions, and morphologies can be obtained. The relation between demixing temperature and morphology was demonstrated via cloud point curve measurement and foams fabrication with controlled thermal protocols, for the model system poly-l-lactide–dioxane–water. The morphologies obtained at a temperature lower than cloud point showed a closed-pore architecture, suggesting a “nucleation-and-growth” separation mechanism, which produced larger po…

Characterization of PLLA scaffolds for biomedical applications

2017

The porosity and pore size distribution of three-dimensional scaffolds have direct implications on their biomedical applications (tissue engineering, drug delivery, and wound dressing). Accordingly, in this paper, a fast, facile, and conservative method relying on low-field nuclear magnetic resonance (LF-NMR) for the evaluation of mean pore size and pore size distribution of polymeric scaffolds is reported. The applicability of the technique is demonstrated on poly-L-lactic acid scaffolds fabricated using the thermal induced phase separation. Results obtained through LF-NMR are successfully compared to scanning electron microscope and X-ray microcomputed tomography micrographs.

Influence of scaffold pore size on collagen I development: A new in vitro evaluation perspective

2013

Bone tissue engineering takes part in the complex process of bone healing by combining cells, chemical/physical signals, and scaffolds with the scaffolds providing an artificial extracellular matrix network. The role of the support template for cell activity is crucial to guide the healing process. This in vitro study compared three different poly(D,L-lactic acid) scaffolds obtained by varying the pore size generated by applying different salt leaching processes. The influence of pore dimensions on the extracellular matrix produced by human osteosarcoma-derived osteoblasts (MG63 cell line) seeded on these different materials was analyzed. This study is targeted on the intermediate stage of…

Pressure-Induced Binding Sites in Molecularly Imprinted Network Polymers

1997

Molecular imprinting in network polymers under high pressure was studied as a means of inducing selective binding sites for molecular recognition. Network polymers of methacrylic acid and ethylene ...