Search results for "Plastics"
showing 10 items of 2724 documents
Thermodynamics of pseudo-ternary systems as a tool to predict the morphologies of cellulose acetate/polystyrene blends cast from tetrahydrofuran solu…
2003
Abstract The demixing behavior of the ternary system THF/CA/PS (tetrahydrofuran/cellulose acetate/polystyrene) was investigated at 25 °C. Cloud point measurements show that the system exhibits a large miscibility gap caused by the incompatibility of CA and PS. Both ends of the experimentally determined tie lines are located inside the two-phase area of the phase diagram. By means of the measured critical composition of the ternary system and the Flory–Huggins interaction parameters published for two of the binary subsystems ( χ CA/THF =0.442 and χ PS/THF =0.475) the polymer/polymer interaction parameter was adjusted (directly minimizing the Gibbs energy) to χ CA/PS =0.057. These thermodynam…
A controlled and versatile NCA polymerization method for the synthesis of polypeptides
2013
A versatile and simple methodology for the preparation of well-defined polyglutamate nanocarriers is described. For the first time ammonium salts with non-nucleophilic tetrafluoroborate anions are used as initiators for the ring opening polymerization of alpha-N-carboxyanhydrides (NCAs) allowing a multigram scale polyglutamate synthesis with defined molecular weight (up to 800 units), low polydispersity (<1.2), controlled chain end functionality and adequate stereoselectivity and absence of any trace of toxic impurity to allow biomedical applications.
Conformation of a chain polyelectrolyte in solution with low molecular weight salt: small angle neutron scattering measurements
1986
Small angle neutron scattering measurements have been carried out on the tetramethylammonium salt of the polystyrenesulfonic acid withDP w =310 and 1060 in water solution with tetramethylammonium chloride with ionic strength between 0.02 M and 1.0 M. The scattering curves in the scattering vector range 0.05 nm−1≤Q≤1.8nm−1 have been fitted using the form factor of a worm-like chain of finite thickness. The conformational parameters mean square radius of gyration, statistic chain element, mass per unit length and mean square radius of the cross-section have been determined experimentally and used for describing the conformation of the coils. By these molecular weights and ionic strengths, exc…
Zinc oxide application in the textile industry: surface tailoring and water barrier attributes as parameters with direct implication in comfort perfo…
2013
The present study focuses on surface tailoring and water barrier attributes of zinc oxide (ZnO)-polyester composite textile materials. The surface properties, such as surface topography and roughness, composite compositions as well as thermal stability of ZnO-100% polyester textile composite materials treated through a padding process with different concentrations of ZnO dispersions as active agent in water and methanol were studied. The results show that 3% ZnO-textile composite material have enhanced water barrier properties compared with the other compositions; a fact which promises improved properties in terms of comfort. ZnO modification of polyester surfaces leads to a dramatic decre…
Evaluation of dermal toxicity of antibacterial cotton textile coated by sol-gel technology
2017
AbstractThis paper reports about cotton textile modification by sol-gel technology with the purpose of obtaining antibacterial properties, evaluation of antibacterial properties and dermal toxicity tests of cotton textile with Zn and Si coating. Antibacterial properties evaluation against pathogenic microorganisms Pseudomonas aeruginosa, Staphylococcus aureus, and Escherichia coli made using the Parallel streak method in accordance with ATCC147 standard. For more specific evaluation of the coated textile, in vitro cytotoxicity test with epidermal HaCat cells was done. It is concluded that the coatings containing Zn and Si obtained by the sol-gel technology can impart antibacterial propertie…
Structure relaxation after temperature jumps in homogeneous polystyrene/poly(styrene-co-bromostyrene) blends
1988
Concentration fluctuations in polymer blends and their change after a temperature jump were studied by time-dependent small angle X-ray scattering experiments. Measurements were conducted on homogeneous mixtures of polystyrene and a partially brominated derivative. Structure factors in thermal equilibrium show the form given by the random phase approximation, thus enabling a direct determination of theχ-parameter and the mean radius of gyration. TheT-dependence ofχ can be understood as the result of superposed enthalpic contributions and a free volume term. In theT-jump experiments, samples were quenched to temperatures near Tg. Relaxation occurs on the time scale of minutes and is nonexpon…
Computer Simulation Studies of Chain Dynamics in Polymer Brushes
2012
Center-of-mass and single monomer motion in grafted chains comprising a strongly stretched polymer brush in thermal equilibrium are studied by large scale molecular dynamics and Monte Carlo simulations of a coarse-grained model. Good solvent conditions are assumed. Our findings seriously question earlier theoretical predictions about the relaxation described by Rouse dynamics of brush coatings. Thus, the correlation functions of parallel and perpendicular components of the mean distance of the center-of-mass from the grafting site, the squared gyration radius and end-to-end distance, are found to deviate strongly from a simple exponential decay. While the relaxation times extracted from the…
Investigation of thermal stability of ethylene copolymers with POSS - Study under static and dynamic conditions
2018
Abstract In the paper there was studied thermal stability of a series of ethylene copolymers with monoalkenylsiloxy- or monoalkenylsilsesquioxanes (POSS) under dynamic and static conditions. The copolymers proved to be more thermally stable than neat polyethylene and neat silsesquioxane comonomers. The kind and the content of the POSS units significantly affected degradation of the copolymers. Thermal oxidation process resulted in structural changes of the (co)polymers as it was evidenced by the variations in the kind and content of carbonyl, as well as by unsaturated end groups. Depending on the structure of the POSS comonomer incorporated into the polymer chain, the silsesquioxane units o…
PMMA-titania nanocomposites: Properties and thermal degradation behavior
2012
Titania nanoparticles were prepared using a solegel method and calcination at 200 and 600 � C in order to obtain anatase and rutile phases, respectively. The obtained powders were used to prepare PMMAe titania nanocomposites by a melt compounding method. The effect of the crystalline phase and the amount of titania, in the range 1e5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of PMMA was investigated by means of X-ray diffractometry (XRD), transmission electron microscopy (TEM), 13 C cross-polarization magic-angle spinning nuclear magnetic resonance spectroscopy ( 13 C{ 1 H}CP-MAS NMR), including the measurement of proton spinelattice relaxation time in t…
Thermal analysis applied to the characterization of degradation in soil of polylactide: II. On the thermal stability and thermal decompositon kinetics
2010
[EN] The disposal stage of polylactide (PLA) was assessed by burying it in active soil following an international standard. Degradation in soil promotes physical and chemical changes in the polylactide properties. The characterization of the extent of degradation underwent by PLA was carried out by using Thermal Analysis techniques. In this paper, studies on the thermal stability and the thermal decomposition kinetics were performed in order to assess the degradation process of a commercial PLA submitted to an accelerated soil burial test by means of multi-linear-non-isothermal thermogravimetric analyses. Results have been correlated to changes in molecular weight, showing the same evolutio…