Search results for "Polymers."
showing 10 items of 3543 documents
Highly selective recovery of Ni(II) in neutral and acidic media using a novel Ni(II)-ion imprinted polymer
2022
In this work, an original ion-imprinted polymer (IIP) was synthetized for the highly selective removal of Ni(II) ions in neutral and acidic media. First a novel functional monomer (AMP-MMA) was synthetized through the amidation of 2-(aminomethyl)pyridine (AMP) with methacryloylchloride. Following Ni(II)/AMP-MMA complex formation study, the Ni(II)-IIP was produced via inverse suspension polymerization (DMSO in mineral oil) and characterized with solid state 13C CPMAS NMR, FT-IR, SEM and nitrogen adsorption/desorption experiments. The Ni(II)-IIP was then used in solid-phase extraction of Ni(II) exploring a wide range of pH (from neutral to strongly acidic solution), several initial concentrat…
Influence of photo-oxidation on the performance and soil degradation of oxo- and biodegradable polymer-based items for agricultural applications
2021
Abstract The examination of the aging behavior of polymers, blends, composites, items, etc. under different environmental conditions is a priority issue for assessing the possible applications and establishing the lifetime. In agriculture, plastic items (mulch films, irrigation tubes, etc.) are widely used and subjected to solar UV exposure that can induce photo-oxidation on macromolecular chains. Therefore, weathering under outdoor conditions and accelerated degradation tests are performed for simulating aging processes during the lifetime of materials and select appropriate stabilizers to be used. In the last decades, oxo- and biodegradable polymers have been investigated and used in agri…
Synthesis of Linear and Star-Shaped Block Copolymers of Isobutylene and Methacrylates by Combination of Living Cationic and Anionic Polymerizations
1998
A new synthetic route for the preparation of polyisobutylene (PIB)-based linear and star-shaped block copolymers was developed by combining living carbocationic and anionic polymerizations. Living PIB chains were quantitatively endcapped with 1,1-diphenylethylene, leading to 1,1-diphenyl-1-methoxy (DPOMe) or 2,2-diphenylvinyl (DPV) termini, or both. Both the DPOMe- and DPV-terminated PIBs, and the mixtures of both endgroups were quantitatively metalated with K/Na alloy, Cs metal, or Li dispersion in THF at room temperature. The resulting stable macrocarbanion obtained by metalation with K/Na alloy was used to initiate living anionic polymerization of tert-butyl methacrylate (tBMA) yielding …
Kinetic treatment of slow initiation in living carbocationic polymerization and investigation of benzyl halides as initiators for the polymerization …
1998
In contrast to earlier conclusions it is demonstrated that kinetic analysis of incremental monomer addition (IMA) experiments for living carbocationic polymerizations with slow initiation leads only to the ratio of apparent rate constants of initiation and propagation. The apparent rate constants depend on the true (bimolecular) rate constants and on the positions of the equilibria between dormant and active states of initiator and polymer chain ends, respectively. The same considerations are true for other living processes involving dormant species, e.g., group transfer polymerization or controlled radical polymerization. Slow initiation of living carbocationic polymerization of isobutylen…
Synthesis of linear and three-arm star tert-chlorine-telechelic polyisobutylenes by a two-step conventional laboratory process
1997
A two-step conventional laboratory process was developed for the synthesis of mono- and difunctional linear and three-arm star tert-chlorine-telechelic polyisobutylenes (PIB) with desired molecular weights (MW) and narrow molecular weight distribution (MWD) by living carbocationic polymerization (LCCP). This polymerization method applies easy to handle operations and chemicals. LCCP of isobutylene (IB), was carried out in CH2Cl2 as solvent and with BCl3 as coinitiator in the first step to obtain soluble low MW PIB prepolymer with narrow MWD. This was followed by addition of hexane, TiCl4 and additional monomer in the second step to prepare PIBs with desired MW and narrow MWD in practically …
Endfunctional Polymers by Functionalization of Living Cationic Chain Ends with 1,1-Diphenylethylene
1995
Abstract A new functionalization method has been developed for the synthesis of 2,2-diphenylvinyl(DPV)-telechelic polyisobutylene (PIB). First, living carbocationic polymerization (LCCP) of isobutylene (IB) is quantitatively end-quenched with a nonpolymerizable olefin, 1,1-diphenylethylene (DPE). This process yields a mixture of diphenyl substituted vinyl and tertiary chlorine endgroups. Treatment of the resulting polymer with potassium-tert-butoxide (tBuOK) leads to the quantitative formation of DPV-telechelic PIB which is a potential macroinitiator precursor for living anionic polymerizations.
Bioadhesive Matrix Tablets Loaded with Lipophilic Nanoparticles as Vehicles for Drugs for Periodontitis Treatment: Development and Characterization
2019
Periodontitis treatment is usually focused on the reduction or eradication of periodontal pathogens using antibiotics against anaerobic bacteria, such as metronidazole (MTR). Moreover, recently the correlation between periodontal diseases and overexpression of reactive oxygen species (ROS) led to the introduction of antioxidant biomolecules in therapy. In this work, bioadhesive buccal tablets, consisting of a hydrophilic matrix loaded with metronidazole and lipophilic nanoparticles as a vehicle of curcumin, were developed. Curcumin (CUR)-loaded nanostructured lipid carriers (NLC) were prepared using glycyrrhetic acid, hexadecanol, isopropyl palmitate and Tween®
Binding of Short Alkyl Chain Surfactants to the (Ethylene oxide)13−(Propylene oxide)30−(Ethylene oxide)13and (Ethylene oxide)75−(Propylene oxide)30−(…
2002
The enthalpy of transfer (ΔHt) of neutral copolymers, at a fixed and low concentration ca. 10-3 mol kg-1, from water to the aqueous surfactant solutions as a function of the surfactant concentration (fSmS) was determined at 25 °C. The surfactants studied are sodium octanoate, sodium decanoate, N-octylpyridinium chloride (OPC), and N,N-dimethyloctylamine-N-oxide (ODAO). The copolymers are (ethylene oxide)13−(propylene oxide)30−(ethylene oxide)13 (L64) and (ethylene oxide)75−(propylene oxide)30−(ethylene oxide)75 (F68). The two copolymers show different hydrophilic−hydrophobic ratios, the larger being for F68. As a general feature, the shape of the ΔHt vs fSmS curve depends on the nature of t…
Studies of host-guest thin films of corona-poled betaine-type polar molecules by kelvin probe technique and atomic force microscopy
2004
In this work betaine-type molecules were investigated. As a result of the asymmetry of charge distribution, molecules possess in the ground state a considerable permanent dipole moment. The decay of surface potential of poled polymer films is dependent at least on two relaxation processes. The influence of glass transition of PMMA on thermal dependence of the surface potential is shown. The transition temperature, where no changes of the surface potential appeared, is related to glass transition temperature of the host-guest system. The topography of the film surface was obtained by AFM.
Determination of non-steroidal anti-inflammatory drugs in water and urine using selective molecular imprinted polymer extraction and liquid chromatog…
2016
Abstract A selective solid-phase extraction was employed for the improvement of the determination of non-steroidal anti-inflammatory drugs (NSAIDs) in continental water and urine samples. Ketoprofen, naproxen, diclofenac, and ibuprofen were selected as target analytes due to they are the most frequently administered and consumed NSAIDs. These compounds were extracted using molecular imprinted polymers and determined by liquid chromatography with diode array (DAD), and tandem-mass spectrometry (MS–MS) detectors. Performance of DAD and MS–MS detectors was evaluated throughout this study. The obtained limits of quantification, after a 50-fold preconcentration solid-phase extraction, varied fro…