Search results for "Pounds"
showing 10 items of 3374 documents
Synthetic, structural and biochemical studies of polynuclear platinum(II) complexes with heterocyclic ligands.
2008
"Non-classical" di- and trinuclear Pt(II) complexes with polydentate nitrogen ligands; ionic [(PtCl(2))(2)(tptz)(2)(mu-PtClNCPh)]Cl (1) [tptz =2,4,6-tris(2-pyridyl)-1,3,5-triazine], [(PtCl(2))(2)(bptz)(2)(mu-Pt)]Cl(2) (2) [bptz = 3,6-bis(2-pyridyl)-1,2,4,5-tetrazine] and neutral [(PtCl(2))(2)(tptz)(2)(mu-PtCl(2))](H(2)O)(4) (3), [(PtCl(2))(2)(mu-tppz)](CHCl(3)) (4) [tppz = 2,3,5,6-tetra(2-pyridyl)pyrazine] complexes, have been prepared and structurally characterized. The neutral tptz and tppz complexes present three and two separate PtCl(2) moieties, respectively, in a cis position, presumably acting in a bifunctional mode towards DNA; the cationic tptz and bptz complexes contain monofuncti…
Characterization of complexes formed between [Me2Sn(IV)]2+ and carboxymethylcelluloses.
2006
Complexes formed between carboxymethylcellulose (CMC) and the [Me(2)Sn(IV)]2+ cation have been prepared in the solid state and characterized by FTIR and Mossbauer spectroscopy. The complexes contained CMC with varying molar weight and degree of carboxylation, and the complexes were isolated both from acidic and from neutral solutions at varying metal-to-ligand ratios. The characteristic vibration bands of the ligands were identified from their pH-dependent FTIR spectra. In the organotin(IV) complexes obtained at pH approximately 2, the -COO- moieties were found to be coordinated in a monodentate manner, and the band characteristic of the protonated (unbound) -COO- group(s) was also identifi…
Experimental and Computational Study of Unique Tetranuclear µ 3 ‐Chloride and µ‐Phenoxo/Chloro‐Bridged Defective Dicubane Cobalt(II) Clusters
2016
Two tetranuclear CoII clusters [Co4(L)2(µ3-Cl)2Cl2] have been prepared by using multidentate diaminobisphenolate ligands. The solid-state structures of the complexes were determined by single-crystal X-ray diffraction. The cores of the cluster compounds can be defined as a two-vertex-deficient dicubane geometry (pseudo-dicubane). In the central unit, the cobalt(II) cations are linked through phenoxide oxygen (outer bridges) and chloride anions (inner bridges), previously unprecedented in this type of cobalt cluster. The magnetic properties were studied by both experimental and computational methods. By using a combination of techniques, we were able to determine the nature and strength of t…
Polypyridyl-functionalizated alkynyl gold(i) metallaligands supported by tri- and tetradentate phosphanes
2017
A series of alkynyl gold(I) tri and tetratopic metallaligands of the type [Au3(CuC-R)3(μ3-triphosphane)] (R = 2,2'-bipyridin-5-yl or C10H7N2, 2,2':6',2''-terpyridin-4-yl or C15H10N3; triphosphane = 1,1,1-tris(diphenylphosphanyl) ethane or triphos, 1,3,5-tris(diphenylphosphanyl)benzene or triphosph) and [Au4(CuC-R)4 (μ4-tetraphosphane)] (R = C10H7N2, C15H10N3; tetraphosphane = tetrakis(diphenylphosphanylmethyl)methane or tetraphos, 1,2,3,5-tetrakis(diphenylphosphanyl)benzene or tpbz, tetrakis(diphenylphosphaneylmethyl)-1,2- ethylenediamine or dppeda) were obtained in moderate to good yields. All complexes could be prepared by a Q4 reaction between the alkynyl gold(I) polymeric species [Au(Cu…
Mononuclear Perfluoroalkyl-Heterocyclic Complexes of Pd(II): Synthesis, Structural Characterization and Antimicrobial Activity
2020
Two mononuclear Pd(II) complexes [PdCl2(pfptp)] (1) and [PdCl2(pfhtp)] (2), with ligands 2-(3-perfluoropropyl-1-methyl-1,2,4-triazole-5yl)-pyridine (pfptp) and 2-(3-perfluoroheptyl-1-methyl-1,2,4-triazole-5yl)-pyridine (pfhtp), were synthesized and structurally characterized. The two complexes showed a bidentate coordination of the ligand occurring through N atom of pyridine ring and N4 atom of 1,2,4-triazole. Both complexes showed antimicrobial activity when tested against both Gram-negative and Gram-positive bacterial strains.
Rapid evaluation of ammonium in different rain events minimizing needed volume by a cost-effective and sustainable PDMS supported solid sensor.
2020
Abstract The presence of ammonium ion in rainwater is due to atmospheric processes which involve its scavenging from gas phase and particulate matter. The fractionated samplings of rainwater can provide information about these processes and their potential sources. However, only a low sample volume may be available, which constrained the analysis in general and more particularly in situ mode. For minimizing this limitation, this work proposes a polydimethylsiloxane (PDMS)-salicylate sensor that produces a color change. The embedding of solid reagents into PDMS was optimized. Good analytical characteristics (analysis time of 10 min, sample volume of 500 μL, limit of detection 0.03 μgmL−1) we…
Comparison and improvement of the existing methods for the determination of aflatoxins in human serum by LC-MS/MS
2010
Aflatoxins are toxic metabolites of some Aspergillus flavus, A. parasiticus and A. nomius strains that occur in many foods and feeds. Aflatoxin B1 is the most abundant and toxic member of the family, and it is also the most potent hepatocarcinogen known. In order to estimate the potential human health risk of aflatoxin B1, it is useful to measure its blood concentration. In this work a rapid liquid chromatography coupled to mass spectrometry (LC-MS/MS) method for the simultaneous determination of aflatoxins B1, B2, G1 and G2 and its metabolites, aflatoxins M1 and M2 in human serum, is proposed. Small serum volumes have been used and the extracts have been obtained without any clean-up proce…
Advantages of monolithic over particulate columns for multiresidue analysis of organic pollutants by in-tube solid-phase microextraction coupled to c…
2011
Abstract The performance of a monolithic C 18 column (150 mm × 0.2 mm i.d.) for multiresidue organic pollutants analysis by in-tube solid-phase microextraction (IT-SPME)-capillary liquid chromatography has been studied, and the results have been compared with those obtained using a particulate C 18 column (150 mm × 0.5 mm i.d., 5 μm). Chromatographic separation has been carried out under isocratic elution conditions, and for detection and identification of the analytes a UV-diode array detector has been employed. Several compounds of different chemical structure and hydrophobicity have been used as model compounds: simazine, atrazine and terbutylazine (triazines), chlorfenvinphos and chlorp…
A sequential-injection system for spectrophotometric determination of p -aminobenzoic acid in sunscreens.
2002
A sequential injection method is proposed for spectrophotometric determination of p-aminobenzoic acid (PABA) in cosmetic formulations. The method is based on diazotization of the analyte, coupling with 8-hydroxyquinoline, and the subsequent formation of a colored product. The experimental conditions used (coupling reagent, sandwich arrangement, volumes aspirated, propulsion flow rate, reaction coil length) were studied. Response of the sequential injection method were linearly dependent on concentrations up to 25 micro g mL(-1) and the detection limit was 2 micro g mL(-1). Throughput was 51 measurements per hour and a complete cycle, including three measurement per sample and a washing step…
Analysis of organophosphorus pesticides in honeybee by liquid chromatography-atmospheric pressure chemical ionization-mass spectrometry.
2001
Pesticides applied in extended agricultural fields may be controlled by means of bioindicators, such as honeybees, in which are the pesticides bioaccumulate. Liquid chromatography-atmospheric pressure chemical ionization-mass spectrometry (LC-APCI-MS) experiments with positive (PI) and negative (NI) ion modes were optimized for the analysis of 22 organophosphorus pesticides in honeybee samples. The extraction required 3 g of sample, which was extracted with acetone. The extract was purified with coagulating solution and reextracted with Cl(2)CH(2). Pesticides studied could be detected by both ionization modes except for parathion, parathion-methyl, and bromophos, which did not give signals …