Search results for "Power"

Power losses in power-split CVTs: A fast black-box approximate method

2018

Abstract This paper addresses the mechanical losses of planetary transmissions, with particular attention to power-split CVTs in their hybrid electric versions. It provides unified layout-independent analytical relationships, which can be used for both analysis, design and control purposes, and a simplified approach; the latter overcomes the necessity to segment the operating range of the power-split CVT in order to keep its loss model physically consistent. An example of application to a real hybrid electric PS-CVT is performed to show the simplicity, accuracy and generality of the proposed method.

Direct Torque Control of a Small Wind Turbine with a Sliding-Mode Speed Controller

2016

In this paper. the method of direct torque control in the presence of a sliding-mode speed controller is proposed for a small wind turbine being used in water heating applications. This concept and control system design can be expanded to grid connected or off-grid applications. Direct torque control of electrical machines has shown several advantages including very fast dynamics torque control over field-oriented control. Moreover. the torque and flux controllers in the direct torque control algorithms are based on hvsteretic controllers which are nonlinear. In the presence of a sliding-mode speed control. a nonlinear control system can be constructed which is matched for AC/DC conversion …

Innovative method to estimate state of charge of the hydride hydrogen tank: application of fuel cell electric vehicles

2021

International audience; Significant attention has been paid to metal hydrides (MH) as an environmentally friendly and safe way to store hydrogen. This technology has considerable potential for the application of embedded hydrogen storage in fuel cell electric vehicles, but its widespread application faces a major problem in terms of estimating the remaining hydrogen amount in the tank. In this work, a new method is proposed for estimating the state of charge (SoC) of the hydrogen hydride tank (HHT) by application of piezoelectric material. The idea is to cover the entire inner wall of the metal-hydride tank with a layer of piezoelectric material. During the process of hydrogen absorption, t…

Energy harvesting using piezoelectric transducers for suspension systems

2020

Abstract Energy harvesting by using functional materials in suspension systems bear potential to win-back certain (even if low) amounts of vibrational energy, otherwise dissipated via the conventional (passive) dampers. Piezoelectric (PE) ceramics are functional materials that can be used for transforming mechanical energy into electrical and vice versa. In this paper, we study the capabilities and efficiency of energy harvesting (EH) with PE transducers under two different kinds of external excitation: i) Periodic and ii) stochastic. An appropriate nonlinear lumped parameter electromechanical model (LPEM) is brought into the two-port network notation. Laboratory experiments were conducted …

Optimisation of refractory coatings realised with cored wire addition using a high-power diode laser

2005

Laser; Cladding; Refractory alloys; Factorial experiments; International audience; The objective or our research was to obtain refractory alloys using the high-power diode laser (HPDL) coating technique. After optimisation using factorial experiments, two different cladding regimes were clearly distinguished. It was also shown that a very narrow transition zone exists between the two regimes, and, inside this zone, clad layers having a satisfactory compromise between the response functions (surface aspect and cavity presence) were obtained. The main objective of our study, namely, the control of the operating parameters (geometrical and kinematical) to realise adequate coatings, without cav…

Through-transmission laser welding of polymers – temperature field modeling and infrared investigation

2007

The purpose of the present study is to estimate the weldability of a polymeric material couple according to their thermal and optical properties. A first model based on Mie theory and Monte Carlo method describes the laser beam behavior in semi-transparent media and makes it possible to approximate the laser power distribution at the interface of the two materials. A second model based on finite element method permits the temperature field estimation into both parts to be welded. The results are validated by infrared thermography.

Inverse kinematic control of an industrial robot used in Vessel-to-Vessel Motion Compensation

2017

An increased level of complex offshore load handling operations is expected due to an increased amount of floating wind turbines, remote fish farms, and autonomous shipping, and in general more advanced operations to be carried out at sea. A common problem for these applications is that both equipment and personnel have to be transported between two floating vessels at sea. An investigation of the Vessel-to-Vessel Motion Compensation (VVMC) problem may increase the efficiency and safety of such operations in the future. In this paper, a control algorithm has been developed and experimentally tested in the Norwegian Motion Laboratory featuring two Stewart platforms (SPs), an industrial robot…

Multi-band identification for enhancing bearing fault detection in variable speed conditions

2020

Abstract Rolling element bearings are crucial components in rotating machinery, and avoiding unexpected breakdowns using fault detection methods is an increased demand in industry today. Variable speed conditions render a challenge for vibration-based fault diagnosis due to the non-stationary impact frequency. Computed order tracking transforms the vibration signal from time domain to the shaft-angle domain, allowing order analysis with the envelope spectrum. To enhance fault detection, the bearing resonance frequency region is isolated in the raw signal prior to order tracking. Identification of this region is not trivial but may be estimated using kurtosis-based methods reported in the li…

Analysis of Linear Feedback Position Control in Presence of Presliding Friction

2016

Algorithmic Approach for Slot Filling Factors Determination in Electrical Machines

2018

In several industrial sectors, such as electric and hybrid traction, the demand for increasingly efficient and high power density electrical machines has grown considerably over the last few years. The improvement of slot filling factor of the electrical machines is an useful provision to satisfy this request. In particular, this topic has been the subject of interest for the industrial sector in recent years, since the technology of winding processes have evolved and allow an economically sustainable realization of windings with an ordered structure rather than randomly. The winding phase must be supported by an accurate design process in which it is possible to evaluate the maximum slot f…