Search results for "PreP"

showing 10 items of 1334 documents

Determination of glyphosate and aminomethylphosphonic acid in natural water using the capillary electrophoresis combined with enrichment step

2005

A previously elaborated capillary electrophoresis (CE) method used for the determination of glyphosate and aminomethylphosphonic acid (AMPA) was slightly modified in order to improve the sensitivity. However, detection limits attained (5 μg mL−1 for glyphosate and 4 μg mL−1 for AMPA) were still not satisfactory for analytical purposes, thus the addition of a preconcentration step before the CE analysis was proposed. AMBERLITE®IRA-900, a strong anion-exchange resin, was used to preconcentrate both analytes in environmental aqueous samples. The experimental conditions optimised in a previous work were readapted, by decreasing the eluent concentration due to CE limitations. Satisfactory result…

Detection limitaminomethylphosphonic acid (AMPA)Chromatographyanion-exchange resinsChemistrycapillary electrophoresisBiochemistryHigh-performance liquid chromatographyAnalytical Chemistrychemistry.chemical_compoundColumn chromatographyCapillary electrophoresisglyphosateGlyphosateenvironmental analysisUltrapure waterEnvironmental ChemistryAminomethylphosphonic acidSample preparationHPLCSpectroscopyAnalytica Chimica Acta
researchProduct

Non-chromatographic speciation of toxic arsenic in fish

2004

Abstract A rapid, sensitive and economic method has been developed for the direct determination of toxic species of arsenic present in fish and mussel samples. As(III), As(V), dimethylarsinic acid (DMA), and monomethylarsonic acid (MMA) were determined by hydride generation–atomic fluorescence spectrometry using a series of proportional equations without the need of a chromatographic previous separation. The method is based on the extraction of arsenic species from fish through sonication with HNO3 3 mol l−1 and 0.1% (m/v) Triton and washing of the solid phase with 0.1% (m/v) EDTA, followed by direct measurement of the corresponding hydrides in four different experimental conditions. The li…

Detection limitchemistry.chemical_compoundCertified reference materialsChromatographyChemistryNitric acidSonicationExtraction (chemistry)Fluorescence spectrometrychemistry.chemical_elementSample preparationArsenicAnalytical ChemistryTalanta
researchProduct

A validated and fast procedure for FTIR determination of Cypermethrin and Chlorpyrifos.

2005

Abstract A FTIR methodology has been developed for the simultaneous determination of Cypermethrin and Chlorpyrifos in pesticide commercially available formulations. The method involves the extraction of both active principles with CHCl3 and direct measurement of the peak area values between 1747 and 1737 cm−1 corrected with a baseline defined at 2000 cm−1 for Cypermethrin and peak height values established at 1549 cm−1 corrected using a baseline situated at 1650 cm−1 for Chlorpyrifos. The limits of detection achieved were of the order of 0.7 and 0.4% (w/w), and the relative standard deviation 0.4 and 0.2% for Cypermethrin and Chlorpyrifos, respectively. The developed procedure provided stat…

Detection limitchemistry.chemical_compoundChromatographychemistryChlorpyrifosExtraction (chemistry)Analytical chemistrySample preparationHigh-performance liquid chromatographyFourier transform spectroscopyStandard deviationAnalytical ChemistryCypermethrinTalanta
researchProduct

Direct FIA—AS determination of potassium and magnesium in cement samples by use of the slurries approach

1992

A direct procedure has been developed for the flame atomic determination of potassium and magnesium in cement samples. A 50-mg sample is dispersed in 25 ml of 0.13M nitric acid; 100 mul of this slurry is injected in a double channel FIA manifold simultaneously with 100 mul of a 10% (w/v) lanthanum solution. This procedure allows the rapid extraction of potassium and magnesium by leaching of the sample; nitric acid is not necessary if only potassium must be determined and the sample can be diluted with only distilled water. Aqueous standards are used. The manifold employed includes a well-stirred mixing chamber, which provides an adequate on-line dilution of the sample, in order to obtain em…

Detection limitchemistry.chemical_compoundchemistryMagnesiumNitric acidPotassiumSlurryAnalytical chemistrychemistry.chemical_elementSample preparationAtomic spectroscopyAnalytical ChemistryDilutionTalanta
researchProduct

Atomic fluorescence determination of inorganic arsenic in soils after microwave-assisted distillation

2000

Abstract An inexpensive microwave-assisted distillation procedure has been developed for quantitative determination of inorganic arsenic in soils by atomic fluorescence spectrometry (AFS). After reduction of As(V) to its trivalent state with potassium iodide, inorganic arsenic was distilled as AsCl 3 that was finally determined by atomic fluorescence after hydride generation with NaBH 4 in HCl medium. The different parameters that control the distillation: concentration and volume of HCl, time of distillation, sample weight, and oven load, were studied. The methodology developed has a detection limit of 0.015 μg l −1 , which corresponds to a concentration of 0.006 μg of As per gram of soil,…

Detection limitintegumentary systemMicrowave ovenAnalytical chemistrychemistry.chemical_elementHydrochloric acidcomplex mixturesBiochemistryAnalytical Chemistrylaw.inventionSteam distillationchemistry.chemical_compoundchemistrylawNitric acidEnvironmental ChemistrySample preparationDistillationSpectroscopyArsenicAnalytica Chimica Acta
researchProduct

Halloysite nanotubes for efficient loading, stabilization and controlled release of insulin

2018

Hypothesis: Oral insulin administration is not actually effective due to insulin rapid degradation, inactivation and digestion by proteolytic enzymes which results in low bioavailability. Moreover insulin is poorly permeable and lack of lipophilicity. These limits can be overcome by the loading of protein in some nanostructured carrier such as halloysite nanotubes (HNTs). Experiments: Herein we propose an easy strategy to obtain HNT hybrid materials for the delivery of insulin. We report a detailed description on the thermal behavior and stability of insulin loaded and released from the HNTs hybrid by the combination of several techniques. Findings: Release experiments of insulin from the H…

Dichroismmedicine.medical_treatmentHalloysite nanotube02 engineering and technology01 natural sciencesBiochemistryNanocompositesChitosanchemistry.chemical_compoundColloid and Surface ChemistryDrug StabilityProtein stabilityHalloysite nanotube (HNTs)InsulinTransdermalSettore CHIM/02 - Chimica FisicaDrug CarriersNanotubesProteolytic enzymes021001 nanoscience & nanotechnologyControlled releaseSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsEnzyme inhibitionAluminum SilicatesBionanocomposite film0210 nano-technologyHybrid materialBionanocomposite hybridSurface PropertiesDrug Compoundingengineering.materialCircular dichroism data010402 general chemistrySustained release InsulinAdministration CutaneousHalloysiteBiomaterialsKaolinitemedicineParticle SizeHybrid materialChitosanInsulinBiomedical applicationMedical applicationYarn Bio-nanocompositeMembranes Artificial0104 chemical sciencesNanotubeDrug LiberationHalloysite nanotubes Insulin Protein stability Sustained release Bionanocomposite hybridchemistryChemical engineeringDelayed-Action PreparationsengineeringClayNanocarriersSustained release
researchProduct

Metodologías de enseñanza y aprendizaje del arte en la educación primaria

2011

La investigación que aquí se resume está centrada en el arte y su historia dentro de la educación primaria ya que se considera esta materia como clave para desvelar la mirada de los niños hacia el mundo que les rodea y así puedan aprender a descodificarlo. Desde el inicio de la investigación, se ha intuido que todavía no tenemos ninguna teoría del conocimiento que nos explique por qué los mismos niños pueden aprender entusiasmados algo y no querer aprender otra cosa. La investigación quería encontrar y aislar algunos de los factores que contribuyen al aprendizaje centrándose en las diferencias en el método de enseñanza como factor clave.

Didàctica de l'art:PEDAGOGÍA::Preparación y empleo de profesores::Preparación de profesores [UNESCO]Art teaching methodsUNESCO::HISTORIA::Historia por especialidades::Historia del arteUNESCO::PEDAGOGÍA::Preparación y empleo de profesores::Preparación de profesoresEstratègies d'aprenentatgedidáctica del arte métodos de aprendizaje:HISTORIA::Historia por especialidades::Historia del arte [UNESCO]Learning strategies
researchProduct

A method for the determination of dimethylamine in air by collection on solid support sorbent with subsequent derivatization and spectrophotometric a…

2005

A new method for dimethylamine determination in air is reported. The proposed assay is based on the employment of C18-packed solid phase extraction cartridges for sampling. The retained amine is then derivatized inside the cartridges with the reagent 1,2-naphthoquinone-4-sulfonate. By observing the coloured area of the cartridge, a semiquantitative estimation of the amine can be made. It was also possible to distinguish between primary and secondary amines by visual inspection. Quantitative tests entailed desorption from the cartridges of the derivatives formed, and measurement of the absorbance of the collected extracts. The selected conditions were applied to quantify dimethylamine up to …

DiethylamineDetection limitChromatographyAirOrganic ChemistryReproducibility of ResultsGeneral MedicineBiochemistrySensitivity and SpecificityAnalytical ChemistryCartridgechemistry.chemical_compoundchemistrySpectrophotometryReagentSample preparationSolid phase extractionVolatilizationDerivatizationDimethylamineDimethylaminesNaphthoquinonesJournal of chromatography. A
researchProduct

Preparation of photocatalytic brookite thin films

2007

Pure brookite films were deposited from a brookite dispersion obtained by peptizing a mixture brookite–rutile prepared by thermolysis of TiCl4 in a HCl solution. The films were characterised by X-ray diffraction and Raman spectroscopy. The photoactivity of the samples was tested by using the photo-oxidation of 2-propanol in gas–solid regime as a probe reaction. The brookite films efficiently degraded 2-propanol under UV illumination.

DiffractionMaterials scienceTitanium oxideBrookiteBrookite filmThermal decompositionMetals and AlloysAnalytical chemistryPhotocatalystSurfaces and InterfacesSol–gel preparationSurfaces Coatings and FilmsElectronic Optical and Magnetic Materialssymbols.namesakevisual_artMaterials Chemistrysymbolsvisual_art.visual_art_mediumPhotocatalysisSettore CHIM/07 - Fondamenti Chimici Delle TecnologieThin filmRaman spectroscopyDispersion (chemistry)
researchProduct

Structure solution of zeolites by automated electron diffraction tomography - Impact and treatment of preferential orientation

2014

Abstract In this paper the reliability of structure solution of nano-crystalline porous compounds with preferred orientation based on automated electron diffraction tomography (ADT) is discussed. It will be shown that the limitations of the data acquisition geometry can be overcome by completing the missing diffraction data with additional diffraction information. Apart from different ways of sample preparation, data merging with either additional ADT data sets or intensities derived from X-ray powder diffraction comprise an effective way to improve the accuracy of the structure solution.

DiffractionZeoliteOrientation (computer vision)ChemistryGeneral ChemistryCondensed Matter PhysicsElectron diffraction; MOF; Structure determination; ZeoliteComputational physicsCrystallographyData acquisitionElectron diffractionElectron diffractionMechanics of MaterialsGeneral Materials ScienceSample preparationTomographyStructure determinationPowder diffractionElectron backscatter diffractionMOF
researchProduct