Search results for "Process (engineering)"
showing 10 items of 931 documents
Effect of processing temperature and mixing time on the properties of PP/GnP nanocomposites
2020
Abstract During processing of molten polymers the thermal and mechanical stress acting on the melt in presence of oxygen can induce degradation with a modification of the chemical structure of the polymers. This picture can become even more relevant if the melt is a multiphasic polymer system. In this last case, the effects of the degradation depend also on the presence of a second phase and on the interactions between the two phases. In this work, the effect of the processing conditions, temperature and time, have been considered in order to investigate the thermo-mechanical and thermo-oxidative degradation of nanocomposites made by polypropylene and different contents of graphene nanoplat…
Reprocessing and restabilization of greenhouse films
2002
From the ecological and economical points of view, reprocessing of polyethylene greenhouse films is a promising solution to reduce discarded materials and to produce useful, or potentially useful, objects for service. Films exposed outdoors, however, show inferior mechanical properties and the melt processing worsens these properties. The addition of stabilizers and antioxidants to recycled plastic products prevents inherent thermal instabilities from occurring within the time frame of proper processing. In this study, we attempt to explore ways for improving product performance by the addition of four different additives when the recycled films undergo intensive shear processing. The proce…
Recycling of degraded polyethylene: Blends with nylon 6
1992
Abstract Recycled polyethylene can be used for blending with nylon to obtain blends with mechanical properties better than those of blends with virgin polyethylene. Moreover, the mechanical properties of these blends are very close to and, in some cases, better than those of the pure nylon and those of blends made with functionalized polyolefines. The carbonyl groups of the photo-oxidized polyethylene react with amino end-groups of nylon 6, giving rise to graft copolymers which act as interfacial agents between the two incompatible phases. Large degrees of photo-oxidation of the polyethylene and intense mixing improve the properties of the blends.
Applications of spray-drying in microencapsulation of food ingredients: An overview
2007
International audience; Spray-drying process has been used for decades to encapsulate food ingredients such as flavors, lipids, and carotenoids. During this drying process, the evaporation of solvent, that is most often water, is rapid and the entrapment of the interest compound occurs quasi-instantaneously. This required property imposes a strict screening of the encapsulating materials to be used in addition to an optimization of the operating conditions. Likewise, if the encapsulated compound is of hydrophobic nature, the stability of the feed emulsion before drying should also be considered. Thus, spray-drying microencapsulation process must rather be considered as an art than a science…
Towards the electrochemical conversion of CO2 to formic acid at an applicative scale: technical and economic analysis of most promising routes
2021
In the last decade, the electrochemical conversion of CO 2 to formic acid, FA, using Sn‐based cathodes, was widely investigated. In this work, the technical feasibility and economic viability of this process were evaluated considering the most promising electrochemical routes reported in the literature. Five case studies, based on the utilisation of GDE technologies or high CO 2 pressures, were analysed. The cost for producing FA by the electrochemical route was compared with that of the conventional chemical route. Several scenarios were envisioned finding the target figures of merit, the potential bottlenecks (including low FA concentration, GDE cost and high energy consumption) of each t…
Drying rate control in microwave assisted processing of sliced apples
2018
The most enhanced microwave systems for the preparation of quality-dehydrated fruits continuously adjust the power level in order to maintain the product temperature above a target value. As a result, typical drying curves that exhibit high drying rates in the middle stage are obtained. This can often lead to quality damage or undesirable changes on food colour and texture. In response to these issues, a microwave system is proposed that can realise drying processes keeping drying rates constant. This approach required a continuous temperature adjustment of the apple slices under test, whose temperature was detected by a computer-aided infrared thermography system. Since temperature correct…
Mechanical recycling of polylactide, upgrading trends and combination of valorization techniques
2016
[EN] The upcoming introduction of polylactides in the fractions of polymer waste encourages technologists to ascertain its valorization at the best quality conditions. Mechanical recycling of PLA represents one of the most cost-effective methodologies, but the recycled materials are usually directed to downgraded applications, due to the inherent thermomechanical degradation affecting its mechanical, thermal and rheological performance. In this review, the current state of mechanical recycling of PLA is reported, with special emphasis on a multi-scale comparison among different studies. Additionally, the applications of physical and chemical upgrading strategies, as well as the chances to b…
Experiments and CFD Predictions of Solid Particle Distribution in a Vessel Agitated with Four Pitched Blade Turbines
2001
The distribution of solid particles in a high aspect-ratio baffled tank agitated with four 45° pitched blade turbines (PBT) was investigated using both experimental measurements and CFD simulations. Dilute suspensions of glass beads in water and moderately viscous liquids were considered. The measurement of axial particle concentration profiles was conducted by means of a light attenuation technique. Fully predictive simulations of solid-liquid suspensions were performed using a Sliding-Grid approach coupled with the Eulerian-Eulerian Two Fluid Model and the ‘homogeneous’ two-phase k-ɛ turbulence model. The simulated particle axial concentration profiles were compared with the experimental …
Particle suspension in top-covered unbaffled tanks
2010
Abstract Unbaffled stirred tanks are seldom employed in the process industry as they are considered poorer mixers than baffled vessels. However, they may be expected to provide significant advantages in a wide range of applications (e.g. crystallization, food and pharmaceutical processes, etc.), where the presence of baffles is often undesirable. In the present work solid–liquid suspension in an unbaffled stirred tank is investigated. The tank was equipped with a top-cover in order to avoid vortex formation. A novel experimental method (the “steady cone radius method”, SCRM) is proposed to determine experimentally the minimum impeller speed at which solids are completely suspended. Experime…
Control of the Properties of Micrometer-Sized Actuators from Liquid Crystalline Elastomers Prepared in a Microfluidic Setup
2010
In this article new results on the preparation of monodisperse particles from a liquid crystalline elastomer in a microfluidic setup are presnted. For this, droplets from a liquid crystalline monomer are prepared in a microfluidic device and polymerized while they are flowing inside a microtube. The particles obtained by this method possess an internal orientation, which gives them actuating properties. When they are heated into the isotropic phase of the liquid crystalline material they show a reversible change in shape whereby they change their length in one direction by almost 100%. It is shown how the variation of experimental parameters during their synthesis impacts the properties of…