Search results for "Process (engineering)"
showing 10 items of 931 documents
A comparative assessment of energy demand and life cycle costs for additive- and subtractive-based manufacturing approaches
2020
Abstract The applicability domain of Additive Manufacturing (AM) processes, apart from technological and quality results, relies on environmental and cost performance. These aspects still need to be better understood. To this aim, comparative analyses with conventional manufacturing routes are needed. In this paper, empirical cost and energy requirement models are suggested to assess subtractive- (machining) and additive- (Electron Beam Melting) based manufacturing approaches for the production of Ti-6Al-4V components. A life-cycle perspective is adopted, and all the steps from the input material production to the post-AM processing operations and the use phase are included. The analyses ha…
An Additive Model to Predict the Rheological and Mechanical Properties of Polypropylene Blends Made by Virgin and Reprocessed Components
2021
In this work, an additive model for the prediction of the rheological and mechanical properties of monopolymer blends made by virgin and reprocessed components is proposed. A polypropylene sample has been reprocessed more times in an extruder and monopolymer blends have been prepared by simulating an industrial process. The scraps are exposed to regrinding and are melt reprocessed before mixing with the virgin polymer. The reprocessed polymer is, then, subjected to some thermomechanical degradation. Rheological and mechanical experimental data have been compared with the theoretical predictions. The results obtained showed that the values of this simple additive model are a very good fit fo…
The numerical simulation of heat transfer during a hybrid laser–MIG welding using equivalent heat source approach
2014
International audience; The present study is dedicated to the numerical simulation of an industrial case of hybrid laser-MIG welding of high thickness duplex steel UR2507Cu with Y-shaped chamfer geometry. It consists in simulation of heat transfer phenomena using heat equivalent source approach and implementing in finite element software COMSOL Multiphysics. A numerical exploratory designs method is used to identify the heat sources parameters in order to obtain a minimal required difference between the numerical results and the experiment which are the shape of the welded zone and the temperature evolution in different locations. The obtained results were found in good correspondence with …
Stable layer-building strategy to enhance cold-spray-based additive manufacturing
2020
Abstract Cold spray (CS) has recently become one of the popular additive manufacturing (AM) processes for its advantages: high-forming efficiency, low temperature, and no phase changing of materials. These advantages may make CS able to form large volume objects and possibly directly iterate with material-removing processes to become a hybrid AM process. Current research proposes using a bulk-based volume-forming strategy (e.g. a tessellation-based method) for volume building. Although it can form 3D volumes, the control of the process is difficult and it has limitations in forming complex 3D near-net-shapes with acceptable accuracy. This also conflicts with the basic principle of AM, where…
Microstructural, mechanical and energy demand characterization of alternative WAAM techniques for Al-alloy parts production
2020
Abstract Additive manufacturing (AM) processes are gathering momentum as an alternative to conventional manufacturing processes. A research effort is being made worldwide to identify the most promising AM approaches. Within this category, wire arc additive manufacturing (WAAM) is among the most interesting, especially when large parts must be manufactured. In this paper, two different WAAM deposition techniques suitable for the deposition of Aluminum alloys, Cold Metal Transfer (CMT) and CMT mix drive, are analyzed and compared. With the aim of obtaining a clear picture concerning the two different techniques, microstructural analyses, mechanical property evaluation and electrical energy de…
Integrated WAAM-Subtractive Versus Pure Subtractive Manufacturing Approaches: An Energy Efficiency Comparison
2019
Over the last years, additive manufacturing (AM) has been gathering momentum both in the academic and in the industrial world. Besides the obvious benefits in terms of flexibility and process capabilities, the environmental performance of such processes has still to be properly analyzed. Actually, the advantages of additive manufacturing over conventional processes are not obvious. Indeed, different manufacturing approaches result in different amounts of involved material and in different processing energy demands. Environmental comparative analyses are hence crucial to properly characterize AM processes. In this paper, an energetic comparison between the emerging wire arc additive manufact…
An energy efficiency analysis of Single Point Incremental Forming as an Approach for Sheet Metal Based Component Reuse
2020
Abstract Producing materials causes about 25% of all anthropogenic CO2 emissions. Metals play a significant role, steel and aluminum account for 24% and 3% of worldwide material related emissions respectively. Fostering resources efficiency strategies in the field of sheet components could lead to a significant environmental impact reduction. Reshaping could be one of the most efficient strategy to foster material reuse and lower the environmental impact due to material production. Specifically, for aluminum recycling, the overall energy efficiency of conventional route is very low and, more importantly, permanent material losses occur during re-melting because of oxidation. The present pap…
An insight into the electrical energy demand of friction stir welding processes: the role of process parameters, material and machine tool architectu…
2018
The manufacturing sector accounts for a high share of global electrical energy consumption and CO 2 emissions, and therefore, the environmental impact of production processes is being more and more investigated. An analysis of power and energy consumption in friction stir welding processes can contribute to the characterization of the process from a new point of view and also provide useful information about the environmental impact of the process. An in-depth analysis of electrical energy demand of friction stir welding is here proposed. Different machine tool architectures, including an industrial dedicated machine, have been used to weld aluminum and steel sheets under different process …
Novel, automated, semi-industrial modular photobioreactor system for cultivation of demanding microalgae that produce fine chemicals - The next story…
2021
Abstract Recently, there has been increased interest in the use of microorganisms in the production of pharmaceuticals, nutraceuticals and energy supply products, which is due to their rapid growth rate and ability to biosynthesize fine chemicals or biotransform specific xenobiotics. To achieve the desired scale of production and optimization of microbial cultures, it is necessary to design bioreactors that enable process automation, control of working parameters, reduction of microbial and chemical contaminations, and culture independence of climate conditions. In response to this need, an original, modular airlift-type photobioreactor system was designed and manufactured. This novel semit…
Biophysical and functional characterization of the human olfactory receptor OR1A1 expressed in a mammalian inducible cell line
2014
International audience; Olfactory receptors (ORs) play a crucial role in detecting the odorant molecules present in the surrounding environment. These receptors, which belong to class A G-protein-coupled receptors, constitute the largest transmembrane protein family in the human genome. Functional studies showed that the OR family includes members that are able to respond to a large set of odorants and members that are activated by a relatively small number of related odorants. To understand the molecular mechanisms that govern the receptor-ligand interactions, we overexpressed the human OR hOR1A1 in a stable tetracycline-inducible HEK293S cell line. This receptor was engineered by insertin…