Search results for "Process"
showing 10 items of 22310 documents
Life Cycle Energy Consumption and Carbon Dioxide Emissions of Agricultural Residue Feedstock for Bioenergy
2021
The depletion of fossil fuels and climate change concerns are drivers for the development and expansion of bioenergy. Promoting biomass is vital to move civilization toward a low-carbon economy. To meet European Union targets, it is required to increase the use of agricultural residues (including straw) for power generation. Using agricultural residues without accounting for their energy consumed and carbon dioxide emissions distorts the energy and environmental balance, and their analysis is the purpose of this study. In this paper, a life cycle analysis method is applied. The allocation of carbon dioxide emissions and energy inputs in the crop production by allocating between a product (g…
A solar assisted seasonal borehole thermal energy system for a non-residential building in the Mediterranean area
2019
Abstract Solar heating and cooling systems are reliable and feasible solutions among renewable energy technologies. Indeed, solar thermal devices help reduce primary energy consumption and can reduce electricity demand, thus representing one of the best options for satisfying heating and/or cooling energy supply. The Borehole Thermal Energy Storage (BTES) represents one of the best promising option among the various storage technologies, because the size of the storage can be easily extended by drilling additional boreholes and simply connecting the pipes to the existing boreholes; the overall energy efficiency of this system is about 40–60%. In this paper, the authors present an applicatio…
Effect of high hydrostatic pressure on extraction of B-phycoerythrin from Porphyridium cruentum: Use of confocal microscopy and image processing
2019
International audience; The aim of the study was to extract B-phycoerythrin from Porphyridium cruentum while preserving its structure. The high hydrostatic pressure treatments were chosen as extraction technology. Different methods have been used to observe the effects of the treatment: spectrophotometry and confocal laser scanning microscopy followed by image processing analysis. Image processing led to the generation of masks used for the identification of three clusters: intra, extra and intercellular. All methods showed that high hydrostatic pressure treatments between 50 and 500 MPa failed to extract B-phycoerythrin from Porphyridium cruentum cells. The fluorescence emission was negati…
From lab to industry: Scaling up green geopolymeric mortars manufacturing towards circular economy
2021
Abstract Construction is nowadays considered an extremely energy intensive industry and one of the main sources of environmental pollution in the world. Therefore, the research and the development of novel energy-saving manufacturing processes and sustainable construction materials is more than ever urgent and challenging. This paper aims at identifying the industrial process for the production of novel geopolymers to be used as a greener substitute for cement, especially the Portland one, widely used for structural applications to significantly reduce the environmental impact of the construction industry. Here, the materials sustainability and the manufacturing process are improved by valo…
Evaluating the material resource efficiency of secondary aluminium production: A Monte Carlo-based decision-support tool
2019
The contamination of aluminium streams during the different life cycle stages by alloy mixing and/or accumulation of foreign elements, in combination with the limited melt purification options during remelting, represents an important limiting factor in recycling. Consequently, in secondary aluminium production, primary aluminium is used to dilute the concentration of the residual elements, and alloying elements are added to adjust the composition to the target alloy specifications. However, adding elements, for which their refinement in a subsequent recycling step is problematic, results in permanent down-cycling or ‘quality losses’. Hence, it is crucial to more efficiently control the com…
Solar and Heat Pump Systems for Domestic Hot Water Production on a Small Island: The Case Study of Lampedusa
2020
The achievement of United Nations Sustainable Development Goals, related to energy and resource use, is a critical issue for small and insulated communities. In many minor islands, solar energy is not correctly exploited, and electrical heaters are connected to weak grids with very a high share of generation by fossil fuels. As a consequence, there is the necessity to assess the potential and the suitability of diffusion of alternative systems to avoid dependency on the electrical grid and reduce carbon emissions. This paper aims to evaluate the technical and economic performances of some alternative systems exploiting renewable energy for domestic hot water production. Four different syste…
Optimization of photovoltaic solar power plant locations in northern Chile
2017
The optimization of photovoltaic solar power plants location in Atacama Desert, Chile, is presented in this study. The study considers three objectives: (1) Find sites with the highest solar energy potential, (2) determine sites with the least impact on the environment, and (3) locate the areas which produce small social impact. To solve this task, multi-criteria decision analyses (MCDAs) such as analytical hierarchy process and ordered weighted averaging were applied in a GIS environment. In addition, survey results of social impacts were analyzed and included into the decision-making process, including landscape values. The most suitable sites for solar energy projects were found near roa…
Optimization of 3-DOF Parallel Motion Devices for Low-Cost Vehicle Simulators
2017
Motion generation systems are becoming increasingly important in certain Virtual Reality (VR) applications, such as vehicle simulators. This paper deals with the analysis of the Inverse Kinematics (IK) and the reachable workspace of a three-degrees-of-freedom (3-DOF) parallel manipulator, proposing different transformations and optimizations in order to simplify its use with Motion Cueing Algorithms (MCA) for self-motion generation in VR simulators. The proposed analysis and improvements are performed on a 3-DOF heave-pitch-roll manipulator with rotational motors, commonly used for low-cost motion-based commercial simulators. The analysis has been empirically validated against a real 3-DOF …
Preliminary design process for an adaptive winglet
2017
In the framework of Clean Sky 2 Airgreen 2 GRA ITD project, this paper deals with the design process of a morphing winglet for a regional aircraft. By improving A/C aerodynamic efficiency in off-design flight conditions, the morphing winglet is expected to operate during long (cruise) and short (climb and descent) mission phases to reduce aircraft drag and optimize lift distribution, while providing augmented roll and yaw control capability. The mechanical system is designed to face different flight situations by a proper action on the movable parts represented by two independent and asynchronous control surfaces with variable camber and differential settings. A set of suitable electromecha…
Towards a simulation-based tuning of motion cueing algorithms
2016
Abstract This paper deals with the problem of finding the best values for the parameters of Motion Cueing Algorithms (MCA). MCA are responsible for controlling the movements of robotic motion platforms used to generate the gravito-inertial cues of vehicle simulators. The values of their multiple parameters, or coefficients, are hard to establish and they dramatically change the behaviour of MCA. The problem has been traditionally addressed in a subjective, partially non-systematic, iterative, time-consuming way, by seeking pilot/driver feedback on the generated motion cues. The aim of this paper is to introduce a different approach to solve the problem of MCA tuning, by making use of a simu…