Search results for "Pultrusion"
showing 10 items of 15 documents
Long-term moisture absorption and durability of FRP pultruded rebars
2021
Abstract Up to 15-years long moisture diffusion into carbon, glass, and aramid fiber reinforced plastic (FRP) rebars is studied. To eliminate uncertainties in identification of the radial and axial diffusivities, a successive methodology for determination of the diffusion coefficients is proposed. The concept of apparent diffusivity taking into account anisotropy and edge effects is extended to cylindrical samples. The ratio of the axial and radial diffusivities is the lowest for carbon (3) and the highest for glass (81) FRP rebars. Durability performance of the rebars is estimated by monitoring their interlaminar shear strength (ILSS). Long-term exposure of FRP rebars in a humid environmen…
Structural performances of pultruded GFRP emergency structures – Part 2: Full-scale experimental testing
2019
Abstract This paper presents an experimental testing of a pultruded glass fiber reinforced polymer (FRP) structure used for emergency applications continuing the discussion presented in a previous paper (part 1) where the study of the characteristics of material and elements are presented. First, the design of the composite structure and components and the evaluation of the structural behavior by means of numerical and analytical approach according to current regulatory codes are described. In this frame, the global and local response was observed according to load paths deriving from the design loads at limit states. Then, the experimental test on a full-scale 2D model is presented at diff…
Speckle Interferometry Analysis of Full-bending Behavior of GFRP Pultruded Material
2016
Abstract The use of Glass Fiber Reinforced Polymer materials (GFRP) has increased in the last years even among civil structural engineering due to their high specific strength, lightweight and excellent corrosion resistance. With application of the pultrusion method, the manufacture of large-scale profiles with various cross-section forms became potentially possible with relatively low costs. Usually two different technological approaches are available to realize the element: in the first one a mat-roving-mat sequence is adopted, in the second one only roving is present. Continuous filament mat (CFM, fibers distributed randomly in all directions) is often used to build up laminate thickness…
A DIC-based study of flexural behaviour of roving/mat/roving pultruded composites
2015
Abstract This paper reports a study of the flexural behaviour and resultant failure modes in E-glass/polyester pultruded composites. The digital image correlation (DIC) method is used to estimate the effect of fibre orientation on failure behaviour in thick beams, taking into account the presence of continuous filament mat layer (CFM) in the stacking sequence. In particular, the tests were carried out for specimens with off-axis angle of 0°, 7.5°, 15°, 30°, 45° and 90°. The crack initiation and the failure mechanisms depend on the mutual interaction between the stiffness properties of different areas in the stacking sequence. An influence index (I) was introduced to evaluate the magnitude o…
Structural Performances of Composite Pultruded GFRP Emergency Structures
2021
The use of composite FRP pultruded elements in civil constructions is nowadays widely accepted as a valid alternative to classic materials. In the case of emergency applications (as for temporary shelter after earthquakes, floods and all disastrous), the lightness, ease of transport, assembly, safety of use, possibility of disassembly and reuse are key aspects that composite FRP structures can provide easily.
Modelling of phase transitions and residual thermal stress of CTBN rubber modified epoxy resins during a pultrusion process
2007
Abstract The implicit finite difference and fourth order Runge-Kutta method are used both to solve the heat transfer problem in the pultrusion reaction and to calculate the temperature and conversion distributions within a thermoset composite profile. The aim of our work is to study the influence of a rubbery phase added to the epoxy matrix in production conditions. The results have shown that the rubber modified systems have a low exothermic temperature peak value, so that neither the amount of cured resin nor the final product properties are limited. First of all we will show that the phase transition (gelation and vitrification) zones within the die change as the amount of rubber varies …
Mechanical testing and numerical modelling of pull-wound carbon-epoxy spinnaker poles
2002
The paper deals with experimental testing and numerical simulation of the mechanical behaviour of multi-layer cylindrical coupons, of two different diameters, made in carbon-epoxy composite. The aim of the study is to provide a simple and effective numerical model that can be used as a design tool for structural elements having analogous geometrical and manufacturing characteristics. The numerical analysis, performed in the elastic regime with a standard finite element (FE) code, was strongly correlated with the laboratory determination of fibre-volume fractions and of some elastic parameters of the material system. Other parameters, like the shear modulus values G, were in fact appropriate…
Structural performances of pultruded GFRP emergency structures – Part 1: Experimental characterization of materials and substructure
2019
Abstract This paper presents an experimental study in the field of structures made of pultruded fiber reinforced polymers (FRP) elements to be used for emergency purposes. A preliminary design of a 3D pultruded glass fiber reinforced polymer structure is presented with the mechanical characterization of the constituting elements. The axial and flexural properties of laminate and I-shaped GRFP profiles are discussed considering the short term creep. In a companion paper, the benefits, the limits and the reliability of the structure analyzed for emergency applications are discussed. In details, the numerical structural analysis of the full-scale 3D model is described followed by the experimen…
Numerical simulations of the mechanical characteristics of glass fibre reinforced C-profiles
2006
A mechanical characterisation analysis on pultruded glass fibre reinforced C-shaped profiles, developed as modular construction elements to assemble fastening systems, such as doors, window frames and shutters is presented. The key idea is to perform the analysis, and all the related identification procedures of the material parameters, via a coupled approach, based on a limited number of standard laboratory tests and on the numerical finite element simulations of the same tests. The proposed approach allows one to identify all those material parameters which are difficult to detect, by means of simple laboratory experiments on specimens that are extracted from commercial products. It also …
The effect of a liquid CTBN rubber modifier on the thermo-kinetic parameters of an epoxy resin during a pultrusion process
2003
Abstract Rheo-kinetic behaviour of an epoxy resin, coupled with an anhydride hardener, with different CTBN liquid rubber concentration (0–15 phr), used in fibre reinforced plastics, was analysed comparing experimental data with theoretical models. The modelling of technological pultrusion process for thermoset matrix composites, developed through a numerical code realised with MATLAB, is reported, too. The model includes conduction and cure heat, degree of cure and viscosity evolution during the curing within the die. Considerable differences in process condition, using different rubber amount, are obtained. The numerical modelling of process conditions shows that the CTBN rubber presence i…