Search results for "QC"
showing 10 items of 3477 documents
Abrupt elastic-to-plastic transition in pentagonal nanowires under bending
2019
MD modeling and calculations were supported by Russian Science Foundation project grant 18-19-00645 “Adhesion of polymer-based soft materials: from liquid to solid”; mechanical testing and FEM simulations were supported by Estonian Research Council projects PUT1689 and PUT1372.
Measurements of isomeric yield ratios of fission products from proton-induced fission on natU and 232Th via direct ion counting
2017
Independent isomeric yield ratios (IYR) of 81Ge, 96Y, 97Y, 97Nb, 128Sn and 130Sn have been determined in the 25 MeV proton-induced fission of natU and 232Th. The measurements were performed at the Ion Guide Isotope Separator On-Line (IGISOL) facility at the University of Jyväskylä. A direct ion counting measurement of the isomeric fission yield ratios was accomplished for the first time, registering the fission products in less than a second after their production. In addition, the IYRs of natU were measured by means of γ-spectroscopy in order to verify the consistency of the recently upgraded experimental setup. From the obtained results, indications of a dependence of the production rate …
Fission studies at IGISOL/JYFLTRAP: Simulations of the ion guide for neutron-induced fission and comparison with experimental data
2020
For the production of exotic nuclei at the IGISOL facility, an ion guide for neutron-induced fission has been developed and tested in experiments. Fission fragments are produced inside the ion guide and collected using a helium buffer gas. Meanwhile, a GEANT4 model has been developed to simulate the transportation and stopping of the charged fission products. In a recent measurement of neutron-induced fission yields, implantation foils were located at different positions in the ion guide. The gamma spectra from these foils and the fission targets are compared to the results from the GEANT4 simulation. In order to allow fission yield measurements in the low yield regions, towards the tails a…
Measurement of the heaviest Beta-delayed 2-neutron emitter: 136Sb
2017
The Beta-delayed neutron emission probability, Pn , of very exotic nuclei is crucial for the understanding of nuclear structure properties of many isotopes and astrophysical processes such as the rapid neutron capture process (r-process). In addition Beta-delayed neutrons are important in a nuclear power reactor operated in a prompt sub-critical, delayed critical condition, as they contribute to the decay heat inducing fission reactions after a shut down. The study of neutron-rich isotopes and the measurement of Beta-delayed one-neutron emitters (Beta1n) is possible thanks to the Rare Isotope Beam (RIB) facilities, where radioactive beams allow the production of exotic nuclei of interest, w…
Stability and synthesis of superheavy elements: Fighting the battle against fission – example of $^{254}$No
2016
International audience; Superheavy nuclei exist solely due to quantum shell effects,which create a pocket in the potential-energy surface of the nucleus, thusproviding a barrier against spontaneous fission. Determining the height ofthe fission barrier and its angular-momentum dependence is important toquantify the role that microscopic shell corrections play in enhancing andextending the limits of nuclear stability. In this talk, the first measurement ofa fission barrier in the very heavy nucleus 254No will be presented.
Influence of Twinning Microstructure of Crystals with Low Tetragonality on a X-Ray Diffraction
2001
The intensity distributions of the X-rays scattered in the tetragonal single crystal, which represent a complex of the twin domains separated by the coherent parallel boundaries, are simulated. The calculations are performed by using the Monte Carlo method within the framework of a kinematical approach. The thickness distributions of the twin domains are defined according to the geometrical, Gaussian and log normal functions. ‘Critical’ effects of the X-ray scattering are found, namely there is transformation of the tetragonal doublet into singlet or multiplet. As demonstrated, each of characteristics of the tetragonal doublet profile depends on a few parameters of the twin microstructure o…
Deep Learning Networks for Automatic Retroperitoneal Sarcoma Segmentation in Computerized Tomography
2022
The volume estimation of retroperitoneal sarcoma (RPS) is often difficult due to its huge dimensions and irregular shape; thus, it often requires manual segmentation, which is time-consuming and operator-dependent. This study aimed to evaluate two fully automated deep learning networks (ENet and ERFNet) for RPS segmentation. This retrospective study included 20 patients with RPS who received an abdominal computed tomography (CT) examination. Forty-nine CT examinations, with a total of 72 lesions, were included. Manual segmentation was performed by two radiologists in consensus, and automatic segmentation was performed using ENet and ERFNet. Significant differences between manual and automat…
Thermo-Mechanical Analysis and Design Update of the Top Cap Region of the DEMO Water-Cooled Lithium Lead Central Outboard Blanket Segment
2022
Within the framework of the EUROfusion research and development activities, the Water-Cooled Lithium Lead (WCLL) Breeding Blanket (BB) is one of the two candidates to be chosen as the driver blanket for the European DEMO nuclear fusion reactor. Hence, an intense research work is currently ongoing throughout the EU to develop a robust conceptual design able to fulfil the design requirements selected at the end of the DEMO pre-conceptual design phase. In this work, the thermo-mechanical analysis and the design update of the top cap (TC) region of the DEMO WCLL Central Out-board Blanket (COB) segment is presented. The scope of the work is to find a design solution of the WCLL COB TC region abl…
A new design problem in the formulation of a special moment resisting connection device for preventing local buckling
2021
In the present paper an improved formulation devoted to the optimal design problem of a special moment resisting connection device for steel frames is proposed. This innovative device is called a Limited Resistance Plastic Device (LRPD) and it has been recently proposed and patented by some of the authors. It is thought to be preferably located at the extremes of the beam, connecting the beam end cross section with the relevant column. The typical device is a steel element characterized by symmetry with respect to three orthogonal barycentric planes and constituted by a sequence of three portions with abrupt cross section changes. The main novelty of the present proposal is related to the d…
Techniques, Tricks, and Stratagems of Oral Cavity Computed Tomography and Magnetic Resonance Imaging
2022
The oral cavity constitutes a complex anatomical area that can be affected by many developmental, inflammatory, and tumoural diseases. MultiSlice Computed Tomography (MSCT) and Magnetic Resonance Imaging (MRI) currently represent the essential and complementary imaging techniques for detecting oral cavity abnormalities. Advanced MRI with diffusion-weighted imaging (DWI) and dynamic contrast-enhanced perfusion-weighted imaging (DCE-PWI) has recently increased the ability to characterise oral lesions and distinguish disease recurrences from post therapy changes. The analysis of the oral cavity area via imaging techniques is also complicated both by mutual close appositions of different mucosa…