Search results for "RAMAN"
showing 10 items of 1328 documents
Original Approach to Synthesize TiO2/ZnO Hybrid Nanosponges Used as Photoanodes for Photoelectrochemical Applications
2021
[EN] In the present work, TiO2/ZnO hybrid nanosponges have been synthesized for the first time. First, TiO2 nanosponges were obtained by anodization under hydrodynamic conditions in a glycerol/water/NH4F electrolyte. Next, in order to achieve the anatase phase of TiO2 and improve its photocatalytic behaviour, the samples were annealed at 450 degrees C for 1 h. Once the TiO2 nanosponges were synthesized, TiO2/ZnO hybrid nanosponges were obtained by electrodeposition of ZnO on TiO2 nanosponges using different temperatures, times, and concentrations of zinc nitrate (Zn(NO3)(2)). TiO2/ZnO hybrid nanosponges were used as photoanodes in photoelectrochemical water splitting tests. The results indi…
Preparation and photoactivity of electrophoretic TiO2coating film
2012
TiO2 thin films have been obtained by a sol-electrophoretic deposition method on metallic Ti and Pt substrates. X-ray diffraction, Raman spectroscopy and scanning electron microscopy were used to investigate the structure and morphology of plated materials. Annealed TiO2 films mainly are formed in anatase structure with different morphology depending on substrate material. Light induced potential measurements indicate that the morphology substantially have an impact on photoactivity of TiO2 thin films.
"Identification of mixed bromidochloridotellurate anions in disordered crystal structures of (bdmim)2[TeX2Y4] (X, Y = Br, Cl; bdmim = 1-butyl-2,3-dim…
2013
Abstract The discrete mixed [TeBrxCl6−x]2− anions in their disordered crystal structures have been identified by using the phases prepared by the reaction of 1-butyl-2,3-dimethylimidazolium halogenides (bdmim)X with tellurium tetrahalogenides TeX4 (X = Cl, Br) as examples. Homoleptic (bdmim)2[TeX6] [X = Cl (1), Br (2)] and mixed (bdmim)2[TeBr2Cl4] (3), and (bdmim)2[TeBr4Cl2] (4) are formed depending on the choice of the reagents, and their crystal structures have been determined by single-crystal X-ray diffraction. The coordination environments of tellurium in all hexahalogenidotellurates are almost octahedral. Because of the crystallographic disorder, the mixed [TeBr2Cl4]2− and [TeBr4Cl2]2…
Should TiO2 nanostructures doped with Li+ be used as photoanodes for photoelectrochemical water splitting applications?
2017
[EN] Different TiO2 nanostructures, nanotubes and nanosponges, were obtained by anodization of Ti under stagnant and hydrodynamic conditions. Samples were doped with Li+ before and after annealing at 450 degrees C during 1 h. The nanostructures were characterized by different microscopy techniques: Field Emission Scanning Electron Microscopy (FE-SEM) and Raman Confocal Laser Microscopy. Additionally, Incident Photon-to-electron Conversion Efficiency (IPCE), photoelectrochemical water splitting and stability measurements were also performed. According to the results, TiO2 nanostructures doped before annealing present the worst photocurrent response, even if compared with undoped samples. On …
Lateral Fusion of Chemical Vapor Deposited N = 5 Armchair Graphene Nanoribbons
2017
Bottom-up synthesis of low-bandgap graphene nanoribbons with various widths is of great importance for their applications in electronic and optoelectronic devices. Here we demonstrate a synthesis of N = 5 armchair graphene nanoribbons (5-AGNRs) and their lateral fusion into wider AGNRs, by a chemical vapor deposition method. The efficient formation of 10- and 15- AGNRs is revealed by a combination of different spectroscopic methods, including Raman and UV−visnear-infrared spectroscopy as well as by scanning tunneling microscopy. The degree of fusion and thus the optical and electronic properties of the resulting GNRs can be controlled by the annealing temperature, providing GNR films with o…
High photodegradation and antibacterial activity of BN–Ag/TiO 2 composite nanofibers under visible light
2018
To develop material with good photocatalytic properties for organic compound degradation and bacterial removal, we produced Ag/TiO2 and BN–Ag/TiO2 composite nanofibers that included controlled amounts of boron nitride (BN) nanosheets and silver (Ag). After annealing at 500 °C under air, we used scanning electron microscopy, transmission electron microscopy, Brunauer–Emmet–Teller analysis, X-ray diffraction, energy-dispersive X-ray spectroscopy, Raman spectroscopy, UV-visible reflectance spectroscopy and room temperature photoluminescence to investigate the morphological, structural and optical properties of all samples. The photocatalytic tests using methylene blue under visible light, in r…
Ruthenium Oxide Nanotubes Via Template Electrosynthesis
2011
Ruthenium oxide nanotubes were fabricated by a single-step galvanostatic deposition using porous anodic alumina membrane as template. For the electrodeposition process, we used a electrochemical cell specifically designed in order to employ only 0.5 ml of 0.02 M RuCl3•xH2O solution. The deposition from a very small volume was specifically addressed owing to the high cost of ruthenium compounds, which could be of some relevance from an applicative point of view. Several techniques were used to characterize the samples prior to and after thermal treatment, which was carried out at different temperatures in order to study the crystallization process of the deposit. Raman spectroscopy of as-dep…
Synthesis, vibrational and NMR spectroscopic characterization of [N(CH3)4][IO2F2] and X-ray crystal structure of [N(CH3)4]2[IO2F2][HF2]
2004
Abstract The salt, [N(CH3)4][IO2F2], was prepared from [N(CH3)4][IO3] and 49% aqueous HF, and characterized by Raman, infrared, and 19F NMR spectroscopy. Crystals of [N(CH3)4]2[IO2F2][HF2] were obtained by reduction of [N(CH3)4][cis-IO2F4] in the presence of [N(CH3)4][F] in CH3CN solvent and were characterized by Raman spectroscopy and single-crystal X-ray diffraction: C2/m, a = 14.6765(2) A, b = 8.60490(10) A, c = 13.9572(2) A, β = 120.2040(10)°, V = 1523.35(3) A3, Z = 4 and R = 0.0192 at 210 K. The crystal structure consists of two I O 2 F 2 − anions that are symmetrically bridged by two H F 2 − anions, forming a [F2O2I(FHF)2IO2F2]4− dimer. The symmetric bridging coordination for the H F …
Micro-Raman spectroscopy of pigments contained in different calcium carbonate polymorphs from freshwater cultured pearls
2008
The metastable calcium carbonate polymorph vaterite has recently been found to occur commonly in freshwater cultured pearls from Japan and China. Organic pigment molecules in these vaterite regions of freshwater cultured pearls were analysed by resonance and near-resonance micro-Raman spectroscopy, in single spectra and in mapping modes and are compared with their aragonitic counterparts. Four different excitation wavelengths (487.9, 514.5, 532.2 and 632.8 nm) were used, resulting in differential increase of resolution for the pigments. Although vaterite areas were always lightly coloured (light yellow, light brown or white), ten different pigments were identified and a single colour is for…
Multi-analytical study of the medieval wall paintings from the rupestrian church Grotta del Crocifisso at Lentini (eastern Sicily): new evidence of t…
2022
AbstractThis study presents the results of the examination and characterisation of the wall paintings that decorate the rupestrian church named Grotta del Crocifisso, which is located in the territory of Lentini (eastern Sicily, few tens of kilometres from Catania and Syracuse). The earliest mural paintings in the church date back to the twelfth century AD. A multi-analytical approach was adopted for the characterisation of stone materials, secondary degradation products, and pigments. For this purpose, the following techniques were used: reflected light microscopy (RLM), polarised light microscopy on thin sections (PLM), X-ray powder diffraction (XRPD), mercury intrusion porosimetry (MIP),…