Search results for "Reliability"
showing 10 items of 1563 documents
HTLS Conductors: A Way to Optimize RES Generation and to Improve the Competitiveness of the Electrical Market—A Case Study in Sicily
2018
Stringent environmental constraints make more difficult to identify new energy corridors and build new power lines. The increase in the generation of electricity from renewable energy sources (RESs) makes the operation of electrical systems increasingly difficult in some areas. The transmission system operators (TSOs), in Italy Terna, are forced to exploit the existing overhead transmission lines, increasing the possibility of dispatching energy, in particular RES, optimizing the transmission capacity. Therefore, after a brief presentation of the Sicilian electricity system and a brief description of high-temperature low-sag (HTLS) conductors, a case study is presented. It is shown how it i…
Seismic evaluation of ordinary RC buildings retrofitted with externally bonded FRPs using a reliability-based approach
2020
International audience; Despite the extensive literature on reinforced concrete (RC) members retrofitted with fiberreinforced polymer (FRP) composites, few studies have employed a reliability-based approach to evaluate the seismic performance of RC buildings in terms of their collapse capacity and ductility. In this study, the performance of a poorly-confined RC building structure is investigated for different FRP retrofitting schemes using different configurations and combinations of wrapping and flange-bonded FRPs, as two well-established techniques. A nonlinear pushover analysis is then implemented with a computational reliability analysis based on Latin Hypercube Sampling (LHS) to deter…
A new approach to partial discharge detection under DC voltage
2018
The continuing development of HVDC power transmission systems presents many problems related to evaluation of the reliability of power system assets [1]-[5]. In this context the identification of insulation defects plays a key role in preventing unexpected failures of electrical components. Partial discharge (PD) measurement is a useful approach to assessing the condition of HV power apparatus and cables. Such measurements are also widely employed for HVAC systems. The inception mechanisms of PD in AC systems are well-known, and measurements are usually performed following the IEC 60270 standard [6]. PD measurements under DC voltage present complexities related to the nature of the phenomen…
A framework to determine maximum capacity of interconnecting DGs in distribution networks
2018
Interconnecting Distributed Generation (DG) in the distribution network is considered as an important area of power system planning. When the DG placed inappropriately, the DG can have negative impact on some important and critical characteristics of system performance such as increased power losses, degraded voltage profile, and mis-coordination between protection devices. This paper introduces a framework to determine the maximum capacity limits of interconnecting DG units in radial distribution networks in order to keep protection scheme unchanged, while the voltage profile remains within acceptable range and on the same time having the minimum power losses in the network; applying this …
Effect of Demand Side Management on the Operation of PV-Integrated Distribution Systems
2020
In this new era of high electrical energy dependency, electrical energy must be abundant and reliable, thus smart grids are conducted to deliver load demands. Hence, smart grids are implemented alongside distributed generation of renewable energies to increase the reliability and controllability of the grid, but, with the very volatile nature of the Distributed Generation (DG), Demand Side Management (DSM) helps monitor and control the load shape of the consumed power. The interaction of DSM with the grid provides a wide range of mutual benefits to the user, the utility and the market. DSM methodologies such as Conservation Voltage Reduction (CVR) and Direct Load Control (DLC) collaborate i…
A new PLC-based smart metering architecture for medium/low voltage grids: Feasibility and experimental characterization
2018
Abstract This paper investigates the feasibility of a smart metering architecture for modern power grids in the smart cities framework. A particular focus is made on Automatic Meter Reading, with the aim of facing some costs and safety drawbacks of current solutions (such as dependence from wireless communication providers, reliability problems in bad weather conditions, and exposition to cyber-attacks). The proposed architecture exploits power line communications (PLC) at both low and medium voltage level, thanks to new devices and an innovative medium voltage PLC coupling system. The new coupling solution and the whole smart metering architecture are experimentally verified in a wide freq…
Image-based 3D reconstruction using traditional and UAV datasets for analysis of road pavement distress
2018
Abstract On local and urban networks, the enduring issue of scarce resources for Maintenance, Rehabilitation, and Reconstruction strategies (MR&R) has led, in many cases, to using unadjusted or poor techniques for road pavement distress detection and analysis, yielding ineffective or even counterproductive results. Therefore, it is necessary to have tools that can carry out quick, reliable and low-cost assessment surveys. This paper aims at validating the use of innovative and low-cost technologies for road pavement analysis, assessing their potentialities for improving the automation and reliability of distress detection. A Structure from Motion (SfM) technique is analyzed at different alt…
Constitutive Models for the Tensile Behaviour of TRM Materials: Literature Review and Experimental Verification
2021
In recent years, the scientific community has focused its interest on innovative inorganic matrix composite materials, namely TRM (Textile Reinforced Mortar). This class of materials satisfies the need of retrofitting existing masonry buildings, by keeping the compatibility with the substrate. Different recent studies were addressed to improve the knowledge on their mechanical behaviour and some theoretical models were proposed for predicting the tensile response of TRM strips. However, this task is complex due to the heterogeneity of the constituent materials and the stress transfer mechanism developed between matrix and fabric through the interface in the cracked stage. This paper present…
PyDSC: a simple tool to treat differential scanning calorimetry data
2020
AbstractHerein, we describe an open-source, Python-based, script to treat the output of differential scanning calorimetry (DSC) experiments, called pyDSC, available free of charge for download at https://github.com/leonardo-chiappisi/pyDSC under a GNU General Public License v3.0. The main aim of this program is to provide the community with a simple program to analyze raw DSC data. Key features include the correction from spurious signals, and, most importantly, the baseline is computed with a robust, physically consistent approach. We also show that the baseline correction routine implemented in the script is significantly more reproducible than different standard ones proposed by propriet…
Improving topological mapping on NoCs
2010
Networks-on-Chip (NoCs) have been proposed as an efficient solution to the complex communications on System-on-chip (SoCs). The design flow of network-on-chip (NoCs) include several key issues, and one of them is the decision of where cores have to be topologically mapped. This thesis proposes a new approach to the topological mapping strategy for NoCs. Concretely, we propose a new topological mapping technique for regular and irregular NoC platforms and its application for optimizing application specific NoC based on distributed and source routing.