Search results for "Retention time"
showing 10 items of 71 documents
Gas—liquid chromatographic analyses
1989
Abstract The retention (I), dispersion (IM) and selectivity (I*) indices of sixteen polychlorinated dibenzo-p-dioxins and fourteen polychlorinated dibenzofurans were determined on a low-polarity HP-5 capillary column using a gas chromatograph connected with an ion-selective detector. IM and I* values were also calculated for all 73 dibenzo-p-dioxins from the di- to the octachloro isomer and for all possible 135 chlorinated dibenzofurans based on the predicted retention index data reported earlier. The effect of the position of chlorination is shown and the results are compared with those for several series of chlorinated aromatics.
Methane production from orange peel pressing liquid: A kinetic study
1992
Abstract This paper studies the anaerobic fermentation of orange peel pressing liquid (OPPL), in semi‐continuous digesters under thermophilic conditions (50, 55 and 60°C), using rabbit manure as inoculum which has been previously conditioned to substrate and temperature. Experimental data have been fitted, at each temperature, to the Chen and Hashimoto model. Kinetic parameters governing the process have been obtained. It can be observed that both μm and K decrease when temperature increases, within the studied range, whereas the calculated minimum hydraulic retention time, θm, increases with temperature, as tested experimentally.
Radionuclides in wastewater treatment plants: monitoring of Sicilian plants.
2015
Three Sicilian wastewater treatment plants were monitored to assess the occurrence and the behaviour of radionuclides. Two sampling campaigns (screening and long-term) were carried out during which liquid and solid samples have been analysed. It was found that 131I mostly occurred in the samples analysed during the screening campaign (43% of the analysed samples contained 131I). High 131I specific activity was found in the mixed liquor, recycled sludge and dehydrated sludge samples. This finding was mainly due to the tendency of 131I to be associated with solid particles. During the long-term sampling campaign an influence of the sludge retention time (SRT) on the 131I behaviour was found. …
Impulse response tests in completely mixed tanks and reactors. Key assumptions and steps in mathematical developments.
2010
Stimulus-response technique is a method to obtain the Residence Time Distribution (RTD) for the elements of a fluid passing through a vessel. Generally speaking, in reactor science unsteady-state tests may often appear preferable to steady-state since they are made up of a chain of intermediate ones; but without any theoretical necessity holding. In RTD studies, however, non-steady state tests are the only conceivable ones if conservative tracers are employed, because once a transition is over there is no way to reconstruct it and assess the hydraulic behaviour of the tank. Only a series of tests with non-conservative tracers of known disappearance rate would achieve the task, but at the pr…
Characterization of wastewater and biomass activity in a membrane bioreactor using respirometric techniques
2010
Over the last two decades, Membrane Bioreactors (MBRs) emerged even more for wastewater treatment, ensuring high removal efficiencies as well as very small footprint required. Indeed, in this kind of process, a modification in biomass activity and viability can exist compared to that of a conventional activated sludge (CAS) process. In this context, respirometric analysis represents a reliable tool in order to evaluate the actual biomass kinetic parameters, to insert in mathematical models in the design phase, as well as to monitor the biomass viability, especially when these processes are operated with high sludge retention time (SRT) values. The paper presents some results of respirometri…
The influence of sludge retention time on mixed culture microbial fuel cell start-ups
2017
Abstract In this work, the start-ups of air-cathode microbial fuel cells (MFCs) seeds with conventional activated sludge cultivated at different solid retention times (SRTs) are compared. A clear influence of the SRT of the inoculum was observed, corresponding to an SRT of 10 days to the higher current density exerted, about 0.2 A m −2 . This observation points out that, in this type of electrochemical device, it is recommended to use high SRT seeds. The work also points out that in order to promote an efficient start-up, it is not only necessary to use high SRT seeds, but also to feed a high COD concentration. When feeding 10,000 ppm COD and keeping SRT of 10 d differences of current densi…
Optimization of the performance of an air–cathode MFC by changing solid retention time
2017
BACKGROUND This work is focused on the optimization of the performances of air-cathode microbial fuel cells (MFC) by changing the solid retention time (SRT) of the suspended biomass culture. RESULTS Five MFCs inoculated with activated sludge obtained from a municipal wastewater treatment plant were fed with a highly-concentrated acetate solution (10 000 ppm COD) and operated over two-month tests in order to determine how SRT may influence the performances of the bio-electrogenic cells. The MFC operated at SRTs of 2.5 days was found to outperform the other cells, operated at SRT of 1.4, 5.0, 7.4 and 10.0 days. In order to evaluate the possibility of using SRT as a manipulated parameter for t…
Co-digestion of grass silage and cow manure in a CSTR by re-circulation of alkali treated solids of the digestate.
2008
Three laboratory, continuously stirred tank reactors (CSTRs) co-digesting grass silage and cow manure (forming 30% and 70% of substrate volatile solids (VS), respectively) were operated to evaluate the effects of re-circulating an alkali-treated and untreated solid fraction of the digestate back to the reactors. The CSTRs were operated at an organic loading rate (OLR) of 2 kg VS m(-3) day(-1) and hydraulic retention time (HRT) of 20 days with a semi-continuous mode of feeding. The feasibility of co-digestion with substrate VS containing 30% VS of crop was reinforced, resulting in average specific methane yield of about 180-185 1 CH4 kg(-1) VS. Re-circulation of the solid fraction of digesta…
Peak capacity estimation in isocratic elution.
2008
Peak capacity (i.e. maximal number of resolved peaks that fit in a chromatographic window) is a theoretical concept with growing interest, but based on a situation rarely met in practice. Real chromatograms tend to have uneven distributions, with overlapped peaks and large gaps. The number of resolved compounds should, therefore, be known from estimations. Several equations have been reported for this purpose based on three perspectives, namely, the intuitive approach (peak capacity as the size of the retention time window measured in peak width units), which assumes peaks with the same width, and the outlines of Giddings and Grushka, which consider changes in peak width with retention time…
Analysis of Biomass Characteristics in MBR and MB-MBR Systems Fed with Synthetic Wastewater: Influence of a Gradual Salinity Increase
2014
The paper presents the results of a field gathering campaign carried out on two different pilot scale membrane bioreactor (MBR) systems, treating synthetic wastewater subject to a gradual increase of salinity. One was a conventional MBR system, while the other was a moving bed biofilm membrane bioreactor (MB-MBR), which combines suspended biomass and biofilm. Indeed, the presence of suspended carriers inside the bioreactor seems to give benefits due to the collisions between the circulating media and the membrane. The aim of the study was the comparison of two configurations in terms of biomass activity characterization and performance (pollutants removal and hydraulic behaviour). The resul…