Search results for "Rheometer"
showing 10 items of 25 documents
Linear viscoelastic properties of high reclaimed asphalt content mixes with biobinders
2017
The use of high Reclaimed Asphalt (RA) content mixtures together with binders produced from renewable resources (biobinders) is one of the current challenges in pavement engineering research. On the one hand, RA has been used for decades, but there are still some concerns about its performance, especially when high contents are used (>30%). On the other hand, biobinders are relatively new materials, which have to be deeply characterised and studied in order to develop good practices for their use. In this paper, linear viscoelastic properties of biobinders and bio-mixtures manufactured with high RA content and biobinders are analysed and discussed. High-modulus mixtures with 50% RA were…
Rheological properties and morphology in LLDPE and PC based blends
1990
Abstract During an interlaboratory project on polymer blends (Technical Working Party-Polymer Blends-VAMAS), the rheological characteristics of some samples of blends of polycarbonate with linear low density polyethylene have been evaluated with the aid of a capillary rheometer. Some morphological observations on the extruded samples have also been performed through SEM and an attempt has been made to correlate the macroscopic and microscopic results.
Linear Viscoelasticity of Liquid-Crystalline Polymers
2004
A linear (small-amplitude) periodic shear deformation of anisotropic viscoelastic liquids obeying the Akay–Leslie rheological model is considered. The frequency dependences of the real and imaginary components of the complex shear modulus and complex normal-stress coefficient are determined. A comparison between calculation results and test data on the shear flow of poly(γ-benzylglutamate) in m-cresol is carried out. It is stated that, if the material is characterized by some initial orientation, both components of the complex shear modulus contain a multiplier which depends on the degree of the initial orientation and increases the values of the components compared with those for an initia…
Melt stabilisation of high-density film-grade polyethylene
2001
The thermoxidative degradation of a high-density polyethylene stabilised either with standard and novel kinds of antioxidants was examined at many different temperatures. The aim of this work was to investigate the degradation response (crosslinking or chain-breakage) on the polyolefin molecular structure in terms of low shear rate melt viscosity increment and oxidation induction time both studied through steady and dynamic shear flow tests performed in a rotational rheometer. Lactone type antioxidants, especially the one containing P-EPQ phosphite component, exhibit the lowest thermoxidative degradation at high temperatures. Vitamine E, used in blend with a phosphite, appears to be a good …
Processing-property relationships of polypropylene/ciprofloxacin fibers
2015
In this work we prepared polypropylene (PP) fibers incorporating an antibiotic, i.e. ciprofloxacin (CFX), by melt spinning. In particular, PP has been compounded with CFX at different concentrations by using a counter-rotating twin screw compounder. The PP/CFX fibers have been spun by using a capillary rheometer operating under a constant extrusion speed. The effect of “online” hot drawing during the melt spinning or of an “offline” cold drawing on the properties of PP/CFX fibers were evaluated. In particular, the influence of the drawing conditions on the mechanical properties and the release kinetics were studied. Moreover, the rheological behavior in non-isothermal elongation flow has be…
Rheological and Flocculation Analysis of Microfibrillated Cellulose Suspension Using Optical Coherence Tomography
2018
A sub-micron resolution optical coherence tomography device was used together with a pipe rheometer to analyze the rheology and flocculation dynamics of a 0.5% microfibrillated cellulose (MFC) suspension. The bulk behavior of the MFC suspension showed typical shear thinning (power-law) behavior. This was reflected in a monotonously decreasing floc size when the shear stress exceeded the yield stress of the suspension. The quantitative viscous behavior of the MFC suspension changed abruptly at the wall shear stress of 10 Pa, which was reflected in a simultaneous abrupt drop of the floc size. The flocs were strongly elongated with low shear stresses. With the highest shear stresses, the flocs…
Do we understand the solid-like elastic properties of confined liquids?
2021
Recently, in polymeric liquids, unexpected solid-like shear elasticity has been discovered, which gave rise to a controversial discussion about its origin (1⇓–3). The observed solid-like shear modulus G depends strongly on the distance L between the plates of the rheometer according to a power law G ∝ L − p with a nonuniversal exponent ranging between p = 2 and p = 3 . Zaccone and Trachenko (4) have published an article in which they claim to explain these findings by a nonaffine contribution to the liquid shear modulus. The latter is represented as Δ G ∝ − ∑ λ = L , T 1 V … [↵][1]1To whom correspondence may be addressed. Email: giancarlo.ruocco{at}roma1.infn.it. [1]: #xref-corresp-1-1
Shear behaviour of undiluted polyisobutylenes
1979
Some new data in shear flow are presented for two commercial polyisobutylene samples, namely Vistanex LMMH and L 100. In particular beyond a few steady state results, the tangential stress build-up after a sudden imposition of a shear rate and the decay after cessation of steady shear flow have been collected. The data are used to further test a constitutive equation already advanced by some of the authors. The comparison seems to confirm the validity of the proposed model, whose single adjustable parameter is shown to be independent of molecular weight.
Influence of aroma compounds on the mechanical properties of pectin gels.
2004
A detailed study of the rheological behavior of pectin gels, in the presence of aroma compounds in food concentration is reported. In high methoxylated pectin (HMP) gels, it has not yet been shown if aroma compounds can be responsible for modifications in rheology. Two rheological techniques were used to measure the impact of aroma substances on rheological properties of HMP-based systems. Maximum strain to fracture (sigma F) was compared between flavored and unflavored gels on stress-displacement curve, which was obtained with uniaxial compression until fracture. An oscillatory rheometer was applied to determine the gelation time (Tgel). It appeared that all the aroma compounds studied inc…
Correlation between processability and properties of a high density polyethylene by a rheological approach
2002
The thermal-oxidative and thermal-mechanical stability of high density polyethylene (chromium based catalyst technology) was examined at many different temperatures using a rheological approach. The changes in molecular structure, which take place during processing, have been studied using a Clextral co-rotating twin-screw extruder in comparison with dynamic measurements performed with a rotational rheometer under definite conditions of temperature, strain and frequency and in presence of air. In order to evaluate the degradation response, an investigation of elastic modulus G' as a function of frequency ω on the residual sample after ageing has been carried out. The molecular weight increa…