Search results for "Roth"

Luminescence and FTIR Spectroscopy of ZnO Nanocrystals

2006

Time-resolved luminescence and Furje Transformation Infrared (FTIR) absorption spectroscopy for ZnO nanocrystals prepared under different chemical reactions using microwave driven hydrothermal process was studied. OH- group stretching vibration frequency is considerably different in nanocrystals studied and in single ZnO crystal. It is shown that fractions of chemicals used in synthesis process could be found in nanopowders. Luminescence at ~2.0 eV (due to defect states in ZnO crystals and nanopowders) was suppressed in nanopowders obtained by urea method.

Zirconia Based Nanomaterials for Oxygen Sensors – Generation, Characterisation and Optical Properties

2007

Microwave driven hydrothermal synthesis and hydrothermal synthesis were used to obtain ZrO2 nanopowders. Their production with varying phase composition, the characterisation and selected optical properties concerning their potential use as luminescence oxygen sensors are reported. It was found that the powders obtained by the microwave driven hydrothermal method and annealed at 750 0C in air show experiment repeatability within an accuracy of 6 %.

Brookite, the Least Known TiO2 Photocatalyst

2013

Brookite is the least studied TiO2 photocatalyst due to the difficulties usually encountered in order to obtain it as a pure phase. In this review, a comprehensive survey of the different methods available for preparing brookite powders and films is reported. Attention has been paid both to the most traditional methods, such as hydrothermal processes at high temperatures and pressures, and to environmentally benign syntheses using water soluble compounds and water as the solvent. Papers reporting the photocatalytic activity of pure and brookite-based samples have been reviewed.

Design of a reactor operating in supercritical water conditions using CFD simulations. Examples of synthesized nanomaterials

2011

International audience; Direct information about fluids under supercritical water conditions is unfeasible due to the engineering restrictions at high pressure and high temperature. Numerical investigations based on computational fluid dynamics (CFD) calculations are widely used in order to get extensive information on the fluid behavior, particularly to help the design of a new reactor. This paper presents the numerical investigations performed on an original supercritical water device, especially in the level of the reactor. CFD calculations allow to design and optimize the present reactor described in this study. Currently, this process produces some nanometric oxide powders in continuou…

Hydrothermal Synthesis of Cobalt Ferrite Nanosized Powders

2015

Cobalt ferrite powders are synthesized by the co-precipitation technology, combined with the hydrothermal synthesis method and crystallite size, specific surface area (SSA), magnetic properties of synthesized products are obtained. All the synthesized ferrites are nanocrystalline single phase materials with crystallite size of 10-16 nm the SSA of 60±5 m2/g and the calculated particle size of 20±2 nm. Synthesized Co ferrites are characterized by the saturation magnetization MS of 59-60 emu/g, remanent magnetization Mr of 23 emu/g and coercivity Hc of 570-650 Oe.

Nanostructured LiCoO2 Cathode by Hydrothermal Process

2015

V-containing ZrO 2 inorganic yellow nano-pigments prepared by hydrothermal approach

2017

Abstract Recent results on the preparation, characterization and color properties of the V-containing ZrO 2 inorganic yellow nano-pigment are reported. A series of monoclinic V-ZrO 2 solid solution nanocrystals (V x Zr 1-x O 2 , being x = 0, 0.1, 0.02, 0.03, 0.04, 0.05, 0.065, 0.08 and 0.1) were prepared straightforward by hydrothermal processing of mixtures of zirconyl nitrate and ammonium metavanadate in water. Interestingly, the crystalline precipitated obtained by hydrothermal processing at 140 °C for 3 d was almost entirely V-containing ZrO 2 nanocrystals with the structure of monoclinic zirconia for the whole range of compositions. Lattice parameters changes along the series of prepar…

Water diffusion and swelling stresses in ionizing radiation cured epoxy matrices

2017

Abstract In this work a DGEBF epoxy monomer was cured by electron beam radiation in the presence of an iodonium salt and the obtained system was hydrothermally aged as such and also after a thermal treatment, in order to obtain two systems having different uniformity in the cross-linking degree. On both systems, the transient stress field arising from swelling was measured and monitored by an optical Photoelastic technique and the results were commented with reference to a thermally cured epoxy system containing the same monomer and already discussed in a previous work. Beam samples with identical dimensions, obtained from the irradiated systems, have been aged at 80 °C in water, and charac…

Water diffusion and swelling stresses in highly crosslinked epoxy matrices

2016

Abstract The present work investigates the swelling induced stresses arising in two epoxy systems during water uptake. The analysed systems are two epoxy resin based on DGEBA monomer and DGEBF monomer respectively, both fully cured by DDS amine. The systems achieve different cross-link density degrees, and are characterised by high glass transition temperatures ranging between 200 and 230 °C. Both epoxies have been conditioned in deionized water baths at two different temperatures (50 °C and 80 °C). A desorption process at room temperature in a dry airborne environment was performed after saturation. Dynamic Mechanical Thermal Analysis, carried out at the various stages of hydrothermal cond…

The crystallisation of copper(ii) phenylphosphonates

2016

The crystal structures and syntheses of four different copper(II) phenylphosphonates, the monophenylphosphonates α-, β-, and γ-Cu(O3PC6H5)·H2O (α-CuPhPmH (1) β-CuPhPmH (2) and γ-CuPhPmH (3)), and the diphosphonate Cu(HO3PC6H5)2·H2O (CuPhP2mH (4)), are presented. The compounds were synthesized from solution at room temperature, at elevated temperature, under hydrothermal conditions, and mechanochemical conditions. The structures of α-CuPhPmH (1) and CuPhP2mH (4) were solved from powder X-ray diffraction data. The structure of β-CuPhPmH (2) was solved by single crystal X-ray analysis. The structures were validated by extended X-ray absorption fine structure (EXAFS) and DTA analyses. Disorder …