Search results for "SANITARIA"

showing 10 items of 520 documents

A parsimonious dynamic model for river water quality assessment

2010

Water quality modelling is of crucial importance for the assessment of physical, chemical, and biological changes in water bodies. Mathematical approaches to water modelling have become more prevalent over recent years. Different model types ranging from detailed physical models to simplified conceptual models are available. Actually, a possible middle ground between detailed and simplified models may be parsimonious models that represent the simplest approach that fits the application. The appropriate modelling approach depends on the research goal as well as on data available for correct model application. When there is inadequate data, it is mandatory to focus on a simple river water qua…

Environmental EngineeringQuality managementmedia_common.quotation_subjectFresh WaterCivil engineeringRiversWater SupplyQuality (business)mathematical modellingPhotosynthesisphysical-chemical water qualityWater Science and Technologymedia_commonHydrologyNitratesPhysical modelSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleSewageMathematical modelSettore ICAR/02 - Costruzioni Idrauliche E Marittime E IdrologiaWater quality modellingsensitivity analysiModels Theoreticalsimplified modelOxygenQuaternary Ammonium CompoundsKineticsItalyData qualityConceptual modelEnvironmental scienceEnvironmental PollutantsWater qualityAlgorithmsWater Science and Technology
researchProduct

The role of fouling mechanisms in a membrane bioreactor.

2007

The present study has aimed to quantify the role of pore blocking and cake layer in a laboratory scale hollow fibre membrane module in submerged configuration. The membrane reactor (MBR) was fed with raw wastewater, only screened with a 2-mm sieve, collected from the Palermo WWTP. The MBR was characterised by an operating volume of 190 L and equipped with an aeration system located on the bottom of the reactor. The MBR operated for 65 days. The permeate was extracted by imposing a constant flux through the membrane (21 Lh−1m−2). The results confirm the importance of pore blocking control during start-up. In particular, it provides a rapid irreversible fouling that takes place at the beginni…

Environmental EngineeringResistanceStart-upTransmembrane pressureMembrane bioreactorWaste Disposal Fluidlaw.inventionMBRBioreactorslawBiomassFiltrationWater Science and TechnologySuspended solidsSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleMembrane reactorFoulingChemistryMembrane foulingEnvironmental engineeringMembranes ArtificialFoulingMembraneFouling MBR resistancesWastewaterChemical engineeringMembrane bioreactorPorosityFiltrationWater science and technology : a journal of the International Association on Water Pollution Research
researchProduct

The role of EPS in the foaming and fouling for a MBR operated in intermittent aeration conditions

2016

Abstract This work investigates the causes of foaming and fouling in an Intermittent Aerated – Membrane BioReactor (IA-MBR) used for wastewater treatment. The experiment was divided into three periods with different aerated regimes expressed with different t aeration /t cycle ratio (Period I: 60 min/180 min, Period II: 80 min/180 min, Period III: 30 min/90 min). The advanced foaming tests used allow the study of the role of extracellular polymeric substances (EPSs) on foaming and fouling. In general, in the Periods I and II, good correlations between the EPSs and the Modified Scum Index without purification (MSI 0 ) and the Foam Power were observed. The results shown that the filamentous mi…

Environmental EngineeringSegmented filamentous bacteriaBiomedical EngineeringEPS; Filamentous bacteria; Foaming; Fouling; IA-MBR; Biotechnology; Bioengineering; Environmental Engineering; Biomedical EngineeringBioengineering02 engineering and technology010501 environmental sciencesMembrane bioreactor01 natural scienceslaw.inventionExtracellular polymeric substancelawFiltration0105 earth and related environmental sciencesEPS; Filamentous bacteria; Foaming; Fouling; IA-MBRIA-MBRSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleFoulingChemistryEnvironmental engineeringFouling021001 nanoscience & nanotechnologyPulp and paper industryFilamentous bacteriaMembraneSewage treatmentEPSAerationIA-MBR Filamentous bacteria Foaming Fouling EPS0210 nano-technologyFoamingBiotechnologyBiochemical Engineering Journal
researchProduct

Effect of chemical and biological surfactants on activated sludge of MBR system: Microscopic analysis and foam test

2015

Abstract A bench-scale MBR unit was operated, under stressing condition, with the aim of stimulating the onset of foaming in the activated sludge. Possible synergies between synthetic surfactants in the wastewater and biological surfactants (Extra-Cellular Polymeric Substances, EPSs) were investigated by changing C/N ratio. The growth of filamentous bacteria was also discussed. The MBR unit provided satisfactory overall carbon removal overall efficiencies: in particular, synthetic surfactants were removed with efficiency higher than 90% and 95% for non-ionic and ionic surfactants, respectively. Lab investigation suggested also the importance to reduce synthetic surfactants presence entering…

Environmental EngineeringSegmented filamentous bacteriachemistry.chemical_elementBioengineeringFraction (chemistry)MBRSurface-Active AgentsInk testBiopolymersBioreactorsPulmonary surfactantFoam testSurfactantWaste Management and DisposalBiological Oxygen Demand AnalysisMicroscopyChromatographyBacteriaSewageSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleViscosityRenewable Energy Sustainability and the EnvironmentMembranes ArtificialGeneral MedicineActivated sludgeWastewaterchemistryChemical engineeringCarbonFoamingBioresource Technology
researchProduct

Biological Nutrient Removal and Fouling Phenomena in a University of Cape Town Membrane Bioreactor Treating High Nitrogen Loads

2013

The behavior of a University of Cape Town (UCT) membrane bioreactor (MBR) system was investigated for use in biological nutrient removal from real wastewater. The pilot plant was in operation for a period of 165 days, during which an extensive data gathering campaign was conducted. The pilot plant was started up by inoculating it with activated sludge from a nearby wastewater treatment plant, and it was fed by real municipal wastewater characterized by high organic nitrogen concentrations attributable to discharges from industrial wastewater and sporadic landfill leachate. Carbon and biological nutrient removal processes, a sludge production process, and a membrane fouling mechanism were an…

Environmental EngineeringSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleMembrane foulingEnvironmental engineeringMembrane bioreactorIndustrial wastewater treatmentPilot plantActivated sludgeWastewaterEnvironmental ChemistryEnvironmental scienceSewage treatmentLeachateEnvironmental issues Regulations Fouling Nutrient loads Abatement and removal Waste treatmentGeneral Environmental ScienceCivil and Structural EngineeringJournal of Environmental Engineering
researchProduct

Nutrient recovery from wastewater treatment by ultrafiltration membrane for water reuse in view of a circular economy perspective

2022

The study aims to recover nitrogen from wastewater by employing ultrafiltration membrane in water reuse for agriculture purpose. To such aim, a new reclaimed water quality index (RWQI) is proposed and applied including an innovative protocol for its assessment. Specifically, the influence of filtration and backwashing times for an ultrafiltration system aimed to nutrient recovery has been analyzed. The final goal was to pin down the trade-off between operation costs and effluent quality. Results show that backwashing time play a crucial role in reducing the operation costs; indeed, low values (i.e., 0.5 min) lead to an increase in the number of required chemical cleanings and consequently o…

Environmental EngineeringSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleNitrogenRenewable Energy Sustainability and the EnvironmentReclaimed water quality indexUltrafiltrationMembranes ArtificialBioengineeringFoulingUltrafiltration membraneWastewater treatmentNutrientsGeneral MedicineWastewaterSettore MED/42 - Igiene Generale E ApplicataWaste Disposal FluidWater PurificationNutrients recoveryWaste WaterWaste Management and DisposalBioresource Technology
researchProduct

Respirometry for the Characterization of Heterotrophic Biomass Activity: Application to a MBR Pilot Plant Operated with Two Different Start-Up Strate…

2016

A membrane bioreactor (MBR) pilot plant was operated in two subsequent experimental periods (namely, Periods I and II) with different start-up and sludge withdrawal strategies to study its peculiar biokinetic behavior by using respirometric techniques. Two extreme operational conditions were chosen to investigate the different biomass activity under dynamic or pseudostationary conditions during and after the start-up phases. Particularly, the MBR pilot plant was operated with the same volumetric loading rate (VLR) and permeate flux but differently managed during the start-up phase. In Period I, the MBR pilot plant was started up without sludge inoculum and operated without sludge withdrawal…

Environmental EngineeringSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleRespirometric technique0208 environmental biotechnologyHeterotrophEnvironmental engineeringBiomass02 engineering and technology010501 environmental sciencesStart upMembrane bioreactor01 natural sciencesBiokinetic parameter020801 environmental engineeringSludge production.RespirometryPilot plantPermeate fluxEnvironmental ChemistryEnvironmental scienceDecay coefficientInoculum0105 earth and related environmental sciencesGeneral Environmental ScienceCivil and Structural Engineering
researchProduct

Insights on mechanisms of excess sludge minimization in an oxic-settling-anaerobic process under different operating conditions and plant configurati…

2022

In the present research, insights about the mechanisms of excess sludge minimization occurring in an oxic-settling-anaerobic (OSA) were provided. The investigation involved two systems operating in parallel. In particular, a conventional activated sludge (CAS) system as control and a system implementing the OSA process both having a pre-denitrification scheme were considered. Five periods (P1-P5) were studied, during which several operating conditions and configurations were tested. Specifically, the hydraulic retention time (HRT) in the anaerobic reactor of the OSA system (P1 8 h, P2-P3 12 h, P4 8 h, P5 12 h) and the return sludge from the anaerobic to the anoxic (scheme A) (P1-P2) or aero…

Environmental EngineeringSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleSewageExtracellular Polymeric Substance MatrixHealth Toxicology and MutagenesisPublic Health Environmental and Occupational HealthGeneral MedicineGeneral ChemistryActivated sludge Anaerobic side-stream reactor Biological nutrients removal Excess sludge minimization Oxic-settling-anaerobic (OSA) process Wastewater treatmentWaste Disposal FluidPollutionBioreactorsEnvironmental ChemistryAnaerobiosisChemosphere
researchProduct

Comparison between ozonation and the OSA process: analysis of excess sludge reduction and biomass activity in two different pilot plants

2012

The excess biomass produced during biological treatment of municipal wastewater represents a major issue worldwide, as its disposal implies environmental, economic and social impacts. Therefore, there has been a growing interest in developing technologies to reduce sludge production. The main proposed strategies can be categorized according to the place inside the wastewater treatment plant (WWTP) where the reduction takes place. In particular, sludge minimization can be achieved in the wastewater line as well as in the sludge line. This paper presents the results of two pilot scale systems, to evaluate their feasibility for sludge reduction and to understand their effect on biomass activit…

Environmental EngineeringSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleSewageWaste managementbusiness.industryexcess sludge OSA process ozonation respiratory activity sludge minimizationBiomassSewagePilot ProjectsWaste Disposal FluidWater PurificationMixed liquor suspended solidsOzoneActivated sludgePilot plantWastewaterSewage sludge treatmentEnvironmental scienceSewage treatmentAnaerobiosisBiomassbusinessWater Science and TechnologyWater Science and Technology
researchProduct

Stormwater infiltration trenches: a conceptual modelling approach.

2009

In recent years, limitations linked to traditional urban drainage schemes have been pointed out and new approaches are developing introducing more natural methods for retaining and/or disposing of stormwater. These mitigation measures are generally called Best Management Practices or Sustainable Urban Drainage System and they include practices such as infiltration and storage tanks in order to reduce the peak flow and retain part of the polluting components. The introduction of such practices in urban drainage systems entails an upgrade of existing modelling frameworks in order to evaluate their efficiency in mitigating the impact of urban drainage systems on receiving water bodies. While s…

Environmental EngineeringSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleStormwater qualityRainSettore ICAR/02 - Costruzioni Idrauliche E Marittime E IdrologiaStormwaterEnvironmental engineeringintegrated urban drainage managementModels TheoreticalCivil engineeringPercolation trenchcatchment-scale modelinfiltration structure modellingCloggingInfiltration (hydrology)Storage tankstormwater qualityWater MovementsEnvironmental scienceDrainageWater Science and TechnologyWater science and technology : a journal of the International Association on Water Pollution Research
researchProduct