Search results for "SCOPE"
showing 10 items of 2420 documents
Synthesis and characterization of carbon coated sponge-like tin oxide (SnOx) films and their application as electrode materials in lithium-ion batter…
2016
Nanoporous metal oxides are widely used for the development of various functional nanostructures. We report on the synthesis of sponge-like tin oxide films on copper foil by anodization of electrochemically deposited tin films. The thin films are functionalized using a surface-anchoring carbon precursor-polymer (poly(acrylonitrile-b-dopamine acrylamide)) followed by annealing at elevated temperature to convert the polymer coating into a carbonaceous coating. The as prepared and the carbon coated films are characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and Raman spectroscopy. Subsequently, both SnOx films are employed as a…
Transient Moiré rotation patterns in thin colloidal crystals
2010
A high resolution optical microscopy study on low salt charged sphere suspensions settling under gravity reveals the formation of AB-stacked triangular layers via different transient structures. In particular, metastable triangular Moire rotation patterns (formally corresponding to 1 × 1 Rα super structures) with rotation angles α = 27.8° and α = 38.2° are identified.
Synthesis and crystal structure of the α polytype of HfNBr
2002
Abstract α-HfNBr has been prepared at 760 °C in a sealed evacuated fused silica tube by reaction between NH4Br and Hf followed by purification through chemical vapour transport under a temperature gradient. The crystal structure of this compound at room temperature has been determined for the first time by Rietveld refinement of X-ray powder diffraction data, electron diffraction and high resolution electron microscopy. It crystallises in the orthorhombic space group Pmmn with the unit cell parameters a=4.1165(2), b=3.5609(2), c=8.6440(3) A. α-HfNBr is isotypic to FeOCl and is built from layers of composition BrHfNNHfBr stacked along c that are separated by a Van der Waals gap. The haf…
Dielectric relaxation and polaronic hopping in Mn-substituted LaSrNiO4 nickelates prepared by mechanical milling method
2016
Abstract The structures, microstructures and dielectric properties of LaSrNi1−xMnxO4 (x = 0, 0.1, 0.2, 0.3 and 0.5) ceramics synthetized by mechanical milling followed by heat treatment were studied. One single tetragonal phase was revealed in all compounds. Structural parameters were obtained by Rietveld refinement. The substitution of Ni ions by Mn produces a variation of the lattice parameters but no phase change is observed. The surface morphology and elemental analysis of these samples were respectively investigated by Scanning Electron Microscopy (SEM) and energy dispersive X-ray technique (EDS). Giant dielectric response was observed in these ceramics, and at least two relaxations we…
Pickering Emulsions Based on Wax and Halloysite Nanotubes: An Ecofriendly Protocol for the Treatment of Archeological Woods
2020
A novel green protocol for the consolidation and protection of waterlogged archeological woods with wax microparticles has been designed. First, we focused on the development of halloysite nanotubes (HNTs) based Pickering emulsions using wax as the inner phase of the oil-in-water droplets. The optimization of the preparation strategy was supported by both optical microscopy and scanning electron microscopy, which allowed us to show the morphological features of the prepared hybrid systems and their structural properties, i.e., the distribution of the clay at the interface. Also, the dependence of the overall dimensions of the prepared systems on the halloysite content was demonstrated. Micr…
Heavy Metals in Mollusc Shells: A Quick Method for their Detection
2015
It is known for a long time that calcified tissues secreted by aquatic or terrestrial invertebrates – such as mollusc shells – have the ability to concentrate large amounts of pollutants, in particular heavy metals. In the present paper, we have found an extremely rapid and easy procedure to qualitatively detect the putative presence of heavy metals in shells, without having to use sophisticated techniques such as Wavelength Dispersive Spectroscopy, atomic adsorption spectroscopy or ICP-MS. Our method rests on the capacity of the silver enhancement chemicals that are traditionally used in immunogold localization experiments to increase the size of heavy metal nanoparticles, whatever the che…
Surface and interface analysis of worn TiN (PVD) coated cold forging tools
1992
Abstract Wear of cold forging tools, improved by TiN (PVD) hard coating and used in the production of alternator and starter components in the car industry, has been studied in detail. The most complicated case was the tool that produced a clutch housing of high precision. The 630 kN press process (50 pcs min −1 ) caused heavy adhesive and abrasive wear due to material flow, high surface pressure and also wear in the direction of tool movement. Results show that on the worn functional surfaces of the analysed tool, the lifetime of which was extended with TiN coating by a factor of 8–10, the following features were observed: non-uniform TiN coating thickness decrease; long grooves, damaged a…
Thermoelectric current and magnetic field interaction influence on the structure of directionally solidified Sn-10 wt.%Pb alloy
2013
International audience; In this experimental work Sn-10 wt.% Pb alloy is directionally solidified in Bridgman setup at various growth velocities (from 0.5 mu m/s to 20 mu m/s) under transverse 0.4 T magnetic field. Temperature gradient of 8 K/mm is maintained perpendicular to the solidification direction during experiments. Liquid phase convection and its influence on the structure and segregation of an alloy, caused by magnetic field and thermoelectric current interaction (thermoelectromagnetic convection or TEMC) is studied experimentally and estimated theoretically in this work. Detailed velocity order of magnitude estimation is carried out. Besides optical microscopy, component distribu…
Thermal effects of continuous laser treatment on Ti-6 Al(wt%)-4V(wt%) titanium alloy
2008
A titanium alloy Ti-6 Al(wt%)-4V(wt%) was treated in air by Nd:YAG laser radiation (wavelength of 1.064 %m) in continuous mode. Targets were irradiated globally with different levels of energy (accumulated fluence) at constant power. Different focal lengths and beam displacement velocities were used. Cross section microstructural observations were carried out by scanning electron microscopy. Backscattered electron imaging reveals microstructural modifications in samples. A structural phase transformation of beta (bcc) to alpha prime (hcp) phase was observed. The depth of the transformed zone observed by phase transformation is dependent on the treatment parameters. Conformity between micros…
Effect of Growth Temperature on the Structural and Morphological Properties of MgCdO Thin Films Grown by Metal Organic Chemical Vapor Deposition
2017
II-VI oxides ternary alloys have attracted considerable interest of the scientific community due to the possibility of modulating their interesting optoelectronic properties. Despite this interest, MgCdO has been poorly studied. In this work, by using the metal organic chemical vapor deposition method at low pressure, we have analyzed the synthesis of thin films of this alloy. Thus, for a fixed metal-organic precursors content, a change from Mg1-xCdxO (Mg-rich phase) to Cd1-xMgxO (Cd-rich phase) has been induced when decreasing the growth temperature. The temperature range where both phases coexist has been particularly analyzed. Using X-ray diffraction analysis and scanning electron micros…