Search results for "SOFC"
showing 10 items of 660 documents
Metallic interconnects for solid oxide fuel cell: Effect of water vapour on oxidation resistance of differently coated alloys
2009
International audience; The need of interconnect to separate fuel and oxidant gasses and connect individual cells into electrical series in a SOFC stack appears as one of the most important point in fuel cell technology. Due to their high electrical and thermal conductivities, thermal expansion compatibility with the other cell components and lowcost, ferritic stainless steels (FSS) are nowconsidered to be among the most promising candidate materials as interconnects in SOFC stacks. Despite the formation at 800 ◦C of a protective chromia Cr2O3 scale, it can transform in volatile chromium species, leading to the lost of its protectiveness and then the degradation of the fuel cell. A previous…
Interface Solid-State Reactions in La0.8Sr0.2MnO3/Ce0.8Sm0.2O2 and La0.8Sr0.2MnO3/BaCe0.9Y0.1O3 Disclosed by X-ray Microspectroscopy
2019
The stability of the electrode/electrolyte interface is a critical issue in solid-oxide cells working at high temperatures, affecting their durability. In this paper, we investigate the solid-state chemical mechanisms that occur at the interface between two electrolytes (Ce0.8Sm0.2O2, SDC, and BaCe0.9Y0.1O3, BCY) and a cathode material (La0.8Sr0.2MnO3, LSM) after prolonged thermal treatments. Following our previous work on the subject, we used X-ray microspectroscopy, a technique that probes the interface with submicrometric resolution combining microanalytical information with the chemical and structural information coming from space-resolved X-ray absorption spectroscopy. In LSM/BCY, the …
Investigation of lanthanum substitution effects in yttrium aluminium garnet: importance of solid state NMR and EPR methods
2020
Copyright © 2020, Springer Science Business Media, LLC, part of Springer Nature
Solid–Solid Interfaces in Protonic Ceramic Devices: A Critical Review
2020
The literature concerning protonic ceramic devices is critically reviewed focusing the reader's attention on the structure, composition, and phenomena taking place at solid-solid interfaces. These interfaces play a crucial role in the overall device performance, and the relevance of understanding the phenomena taking place at the interfaces for the further improvement of electrochemical protonic ceramic devices is therefore stressed. The grain boundaries and heterostructures in electrolytic membranes, the electrode-electrolyte contacts, and the interfaces within composite anode and cathode materials are all considered, with specific concern to advanced techniques of characterization and to …
Evaluation of a new Cr-free alloy as interconnect material for hydrogen production by high temperature water vapour electrolysis: Study in cathode at…
2012
International audience; For economic and ecological reasons, hydrogen is considered as a major energetic vector for the future. Hydrogen production via high temperature water vapour electrolysis (HTE) is a promising technology. A major technical difficulty related to high temperature water vapour electrolysis is the development of interconnects working efficiently for a long period. Working temperature of 800 degrees C enables the use of metallic materials as interconnects. High temperature corrosion behaviour and electrical conductivity of a new Cr-free Fe-Ni-Co alloy were tested in cathode atmosphere (H-2/H2O) at 800 degrees C. The alloy exhibits a poor oxidation resistance but an excelle…
Performance Analysis of Ammonia in Solid Oxide Fuel Cells
2021
The transition of the marine propulsion system towards alternative fuels is mandatory to offset carbon emission. Among the alternative fuels, ammonia is carbon-free and can be produced in sustainable ways. Ammonia has 17.8% hydrogen (wt %) and is easily liquified at 25°C and 8 bar pressure. The two-stroke internal combustion engines currently used in the marine sector reach efficiencies of about 50% but generate substantial polluting emissions. Solid oxide fuel cells generate electricity with efficiencies greater than 50 % and can use ammonia as fuel. In this work, a single-cell SOFC was characterised using in-situ ammonia decomposition reaction (Int-ADR) and compared with ex-situ ammonia …
Investigation of La2O3 and/or (Co,Mn)3O4 deposits on Crofer22APU for the SOFC interconnect application
2009
International audience; Chromia forming alloys (stainless steels) are among the best candidates for SOFC interconnects. However, problems of decreasing electronic conductivity during high temperature service and volatility of chromium oxide scales need to be solved. Electronically conductive surface coatings, which also reduce oxide scale growth and chromium volatility, are needed to improve stainless steel interconnects. The goal of this study is to investigate combinations of lanthanum oxide (La2O3) and cobalt manganese oxide ((Co,Mn)3O4) coatings on Crofer22APU stainless steel. Thin film coatings of La2O3 (~200 nm) and Co,Mn (1:1) (~2 mm) were deposited via metal organic chemical vapor d…
Manufacturing and testing of a metal supported Ni-YSZ/YSZ/La2NiO4 IT-SOFC synthesized by physical surface deposition processes
2017
International audience; The manufacture of the last generation metal supported IT-SOFC complete cell by dry surface deposition pro-cesses is really challenging. Atmospheric Plasma Spraying (APS) and Reactive Magnetron Sputtering (RMS) processes are respectively adapted to deposit Ni-YSZ anode and YSZ electrolyte layers. RMS is also used to coat a thin and dense La2NiO4 (LNO) cathode layer. In this work, we have realized a complete cell on metallic support (ITM) produced by PLANSEE SE. The innovative LNO cathode layer was compared with screen-printed LNO layers, with and without RMS bonding layer. Electrochemical and Voltammetry tests were performed on these samples. It reveals lower perform…
Time-resolved FDTD and experimental FTIR study of gold micropatch arrays for wavelength-selective mid-infrared optical coupling
2021
The work was partially supported by Sweden's innovation agency Vinnova (Large area CVD graphene-based sensors/IR-photodetectors 2020-00797) and EU CAMART2 project (European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No.739508). TY acknowledges European Regional Development Fund Project No. 1.1.1.2/VIAA/4/20/740.
Opportunity of metallic interconnects for ITSOFC : Reactivity and electrical property.
2006
International audience; Iron-base alloys (Fe-Cr) are proposed hereafter as materials for interconnect of planar-type intermediate temperature solid oxide fuel cell (ITSOFC); they are an alternative solution instead of the use of ceramic interconnects. These steels form an oxide layer (chrornia) which protects the interconnect from the exterior environment, but is an electrical insulator. One solution envisaged in this work is the deposition of a reactive element oxide coating, that slows down the formation of the oxide layer and that increases its electric conductivity. The oxide layer, formed at high temperature on the uncoated alloys, is mainly composed of chromia; it grows in accordance …