Search results for "Savings"

showing 10 items of 71 documents

Energy-environmental and cost assessment of a set of strategies for retrofitting a public building toward nearly zero-energy building target

2017

Abstract The purpose of this study was to assess an energy retrofit of a building representative of those in public tertiary stock, to improve energy performance toward nearly Zero-Energy Building (nZEB) requirements. The building is located in the campus of the Politecnico di Milano University (Italy). Several hypothetical improvements regarding the building envelope and plants were assessed in terms of energy savings, costs, and the reduction of greenhouse gas emissions. The results of the study show that it is possible to reduce primary energy demand and associated emissions up to 40% from the current values by adopting market-available and well-proven technological solutions for retrofi…

EngineeringArchitectural engineeringNearly Zero-Energy BuildingPrimary energy020209 energyCase studyGeography Planning and DevelopmentCase study; Energy savings; Nearly Zero-Energy Building; Retrofit strategies; Geography Planning and Development; Civil and Structural Engineering; Renewable Energy Sustainability and the Environment; TransportationTransportation02 engineering and technologyEnergy savingsNearly Zero-Energy Building Retrofit strategies Energy savings Case study0202 electrical engineering electronic engineering information engineeringRetrofittingRenewable EnergyCivil and Structural EngineeringPlanning and DevelopmentRetrofit strategiesZero-energy buildingSettore ING-IND/11 - Fisica Tecnica AmbientaleGeographySustainability and the EnvironmentRenewable Energy Sustainability and the Environmentbusiness.industryEnergy consumptionRenewable energybusinessEnergy-plus-houseBuilding envelopeEfficient energy use
researchProduct

An Overview on Solar Shading Systems for Buildings

2014

Abstract In recent years, different types of solar shading devices have been proposed, depending on building orientation, location, window characteristics, etc. They can contribute to improve or worsen building thermal and lighting performances both from an energy and comfort point of view. The present paper reports a critical analysis of some studies that investigate shading devices’ effects on building thermal and/or lighting performances. This article points out the difficulty in comparing the different results given the lack of uniformity between the studies, since they analysed buildings with different characteristics, locations and using various indices. Therefore a protocol to carry …

EngineeringArchitectural engineeringOrientation (computer vision)business.industrysolar radiationThermal comfortSolar shadingbuildingsthermal and energy analysiShading systemenergy savingsHVAC systemshading deviceEnergy(all)thermal and energy analysislighting analysiHVACbuildingSettore ING-IND/10 - Fisica Tecnica Industrialeshading devicesShadingbusinessProtocol (object-oriented programming)lighting analysisHVAC systemsEnergy Procedia
researchProduct

Building green covering for a sustainable use of energy

2013

Nowadays the growth of the cities increased built and paved areas, energy use and heat generation. The phenomenon of urban warming, called urban heat island, influences negatively outdoor comfort conditions, pollutants concentration, energy demand for air conditioning, as well as increases environmental impact due to the demand of energy generation. A sustainable technology for improving the energy efficiency of buildings is the use of green roofs and walls in order to reduce the energy consumption for conditioning in summer and improve the thermal insulation in winter. The use of green roofs and walls can contribute to mitigate the phenomenon of heat island, the emissions of greenhouse gas…

EngineeringBioengineeringAir-conditioning; Energy savings; Green roofs; Green walls; Urban ecology; Industrial and Manufacturing Engineering; Mechanical Engineering; BioengineeringEnergy savingsair-conditioning energy savings urban ecology green roofs green walls.Industrial and Manufacturing Engineeringlcsh:Agriculturegreen roofsenergy savingSustainable designUrban heat islandlcsh:Agriculture (General)business.industryair-conditioningMechanical EngineeringEnvironmental engineeringlcsh:SThermal comfortEnergy consumptiongreen wallslcsh:S1-972urban ecologyAir conditioningHeat generationSustainabilitybusinessEfficient energy useair-conditioning; energy saving; urban ecology; green roofs; green walls
researchProduct

Cost modeling for sludge and waste management from wastewater treatment plants: an empirical approach for Spain

2013

Abstract Wastewater treatment involves the generation of large volumes of sludge and other waste. Managing this waste in an economical and environmentally acceptable way has become a matter of increasing importance over the last few years. While the technologies and processes to reduce sludge generation are being widely studied, research on the economic aspects is much more limited. This study applies a cost-modeling methodology that uses statistical information from a sample of Spanish wastewater treatment plants (WWTPs) to generate a sewage sludge and waste management cost function with the aim of contributing to a better understanding of the cost structure and predicting the cost savings…

EngineeringCost structureWaste managementbusiness.industry0207 environmental engineeringEnvironmental engineeringOcean Engineering02 engineering and technology010501 environmental sciences01 natural sciencesPollution6. Clean water12. Responsible consumptionCost savingsWaste treatmentSewage treatment020701 environmental engineeringbusinessSludge0105 earth and related environmental sciencesWater Science and TechnologyDesalination and Water Treatment
researchProduct

Lighting control systems: Factors affecting energy savings' evaluation

2015

Abstract The use of automated lighting control systems allows to reduce lighting costs and to achieve significant energy savings. The energy performances of controls are affected by many factors, the impact of which is very difficult to account for during the design process. The goal of this paper is to describe the factors that influence the control systems’ energy performances, to analyze how the currently available calculation tools take them into account and finally to propose a simple method to adjust results obtained from the simulation software.

EngineeringSIMPLE (military communications protocol)business.industryLighting control systemControl engineeringcomputer.software_genreSimulation softwarelighting control systemsenergy savingsEnergy (all)Energy(all)Control systemEnergy savingDaylightDaylightSmart lightingbusinessEngineering design processcomputerEnergy (signal processing)Simulation
researchProduct

Assessing the effectiveness of green roofs in enhancing the energy and indoor comfort resilience of urban buildings to climate change: Methodology pr…

2021

Abstract The effects of climate change on the built environment represents an important research challenge. Today, green roofs (GRs) represent a viable solution for enhancing energy and urban resilience in the face of climate change, as they can have a positive impact on the building's indoor thermal comfort and energy demand, as well as inducing various environmental benefits (easing urban heat island effects, improving the management of runoff water, reducing air pollution, etc.). Thus, it is important to be able to assess their effectiveness, both today and under future climate conditions, in order to evaluate whether they can also provide a valid long-term solution. In this paper, a sim…

Environmental EngineeringSettore ING-IND/11 - Fisica Tecnica Ambientalebusiness.industryGeography Planning and DevelopmentEnvironmental resource managementAir pollutionClimate changeThermal comfortBuilding and Constructionmedicine.disease_causeEffects of global warmingmedicineEnvironmental scienceClimate change adaptation Energy building simulation Energy savings Green roofs Indoor thermal comfort Urban buildings resilienceUrban heat islandbusinessResilience (network)Urban resilienceBuilt environmentCivil and Structural Engineering
researchProduct

Holes in the Dike: the global savings glut, U.S. house prices and the long shadow of banking deregulation

2015

We explore empirically how capital inflows into the US and financial deregulation within the United States interacted in driving the run-up (and subsequent decline) in US housing prices over the period 1990-2010. To obtain an ex ante measure of financial liberalization, we focus on the history of interstate-banking deregulation during the 1980s, i.e. prior to the large net capital inflows into the US from China and other emerging economies. Our results suggest a long shadow of deregulation: in states that opened their banking markets to out-of-state banks earlier, house prices were more sensitive to capital inflows. We provide evidence that global imbalances were a major positive funding sh…

G28media_common.quotation_subjectHouse pricesjel:F20Monetary economicsjel:F40credit constraintsjel:G21Deregulationjel:G28CREDIT CONSTRAINTSSTATE BANKING DEREGULATIONsavings glut10007 Department of Economics0502 economics and businessddc:330F32G10state banking regulations050207 economicsSAVINGS GLUTEmerging marketsmedia_common050208 finance05 social sciencesHouse prices savings glut global imbalances credit constraints state banking deregulationGlobal imbalancesjel:F32jel:G10330 EconomicsInterest rateShock (economics)Net capital ruleCapital (economics)interstate banking deregulationPortfolioG21house pricesBusinessGeneral Economics Econometrics and FinanceF40state banking deregulationglobal imbalancesF20
researchProduct

Advanced control system for optimal filtration in submerged anaerobic MBRs (SAnMBRs)

2013

The main aim of this study was to develop an advanced controller to optimise filtration in submerged anaerobic MBRs (SAnMBRs). The proposed controller was developed, calibrated and validated in a SAnMBR demonstration plant fitted with industrial-scale hollow-fibre membranes with variable influent flow and load. This 2-layer control system is designed for membranes operating sub-critically and features a lower layer (on/off and PID controllers) and an upper layer (knowledge-based controller). The upper layer consists of a MIMO (multiple-input-multiple-output) control structure that regulates the gas sparging for membrane scouring and the frequency of physical cleaning (ventilation and back f…

INGENIERIA HIDRAULICAIndustrial-scale hollow-fibre membranesFoulingKnowledge-based controllerEnvironmental engineeringPID controllerFiltration and SeparationEnergy savingsBiochemistrylaw.inventionAdvanced control systemMembraneControl theorylawControl systemSubmerged anaerobic MBRVentilation (architecture)Environmental scienceGeneral Materials SciencePhysical and Theoretical ChemistrySpargingFiltrationTECNOLOGIA DEL MEDIO AMBIENTE
researchProduct

The Sustainability Factor: How Much Do Pension Expenditures Improve in Spain?

2020

The reform of 2013 represented a qualitative leap in the reform of the Spanish pension system. Unlike its predecessors, it introduced two automatic resetting mechanisms similar to those of other European countries. The first is the sustainability factor, scheduled to come into effect in 2019 but delayed until 2023, and its ultimate reversal cannot be ruled out. The objective of this study was to quantify the savings, or the lowest expenditure, that can be achieved in the Spanish public contributory pension system by applying it. These savings are measured in terms of cash&mdash

Index (economics)AccrualStrategy and ManagementEconomics Econometrics and Finance (miscellaneous)Sample (statistics)lcsh:HG8011-999901 natural scienceslcsh:Insurance010104 statistics & probabilityActuarial present valueAccounting0502 economics and businessddc:330EconomicsEconometricsfinancial-actuarial methodpay-as-you-go systems0101 mathematicspension savingsPension050208 finance05 social sciencessustainabilityWork (electrical)actuarial equityMicrodata (HTML)Aggregate dataRisks
researchProduct

Economic Consequences of Investing in Anti-HCV Antiviral Treatment from the Italian NHS Perspective: A Real-World-Based Analysis of PITER Data

2019

OBJECTIVE:\ud We estimated the cost consequence of Italian National Health System (NHS) investment in direct-acting antiviral (DAA) therapy according to hepatitis C virus (HCV) treatment access policies in Italy.\ud \ud METHODS:\ud A multistate, 20-year time horizon Markov model of HCV liver disease progression was developed. Fibrosis stage, age and genotype distributions were derived from the Italian Platform for the Study of Viral Hepatitis Therapies (PITER) cohort. The treatment efficacy, disease progression probabilities and direct costs in each health state were obtained from the literature. The break-even point in time (BPT) was defined as the period of time required for the cumulativ…

Liver CirrhosisPediatricsTime FactorsSettore MED/09 - Medicina InternaNational Health ProgramsERADICATIONOUTBREAKantiviral treatment anti HCV economic consequencesHepacivirusLIVER FIBROSISSeverity of Illness IndexHealth Services AccessibilityCOST-EFFECTIVENESSIndirect costs0302 clinical medicineEpidemiologyvirus infection030212 general & internal medicinehealth care economics and organizationscost effectiveness030503 health policy & servicesHealth PolicyHealth services researchhealthHepatitis CHepatitis CMarkov Chainschronic hepatitis C virus infection fibrosis progression cost effectiveness liver fibrosisItalyPharmacology; Health Policy; Public Health Environmental and Occupational HealthCohortSettore SECS-P/03 - Scienza delle FinanzeDisease ProgressionPublic Health0305 other medical scienceViral hepatitisAnti-HCV antiviral treatmentCHRONIC HEPATITIS-Cmedicine.medical_specialtyGenotypeSettore MED/12 - GASTROENTEROLOGIAVIRUS-INFECTIONAntiviral AgentsNO03 medical and health sciencesCost SavingsAntiviral Agents; Cost Savings; Disease Progression; Genotype; Health Policy; Health Services Accessibility; Hepacivirus; Hepatitis C; Humans; Italy; Liver Cirrhosis; Markov Chains; National Health Programs; Severity of Illness Index; Time FactorsmedicineMANAGEMENTHumanschronic hepatitis CINDUCED DISEASESMETAANALYSISPharmacologyHealth economicsbusiness.industryPublic healthEnvironmental and Occupational HealthPublic Health Environmental and Occupational Healthmedicine.diseaseFIBROSIS PROGRESSIONbusiness
researchProduct