Search results for "Sawdust"
showing 10 items of 20 documents
Combustion Properties of Birch (Betula pendula) Black Liquors From Sulfur-Free Pulping
2016
Sulfur-free pulping has an environmental advantage over the traditional kraft process. This article describes the combustion properties of the black liquors produced from silver birch (Betula pendula) sawdust using three different cooking processes: two sulfur-free cooks (soda-anthraquinone and oxygen-alkali), and one reference kraft cook. It also considers the corresponding black liquors from an integrated forest biorefinery, in which a hot-water pretreatment of feedstock was performed prior to pulping. With the same cooking time, the total burning times for the sulfur-free black liquors were higher (15–55%) than those for the conventional kraft black liquors. However, no significant diffe…
Fast pyrolysis of hot-water-extracted and delignified silver birch (Betula pendula) sawdust by Py-GC/MS
2017
The thermochemical behavior of birch (Betula pendula) sawdust both untreated and after various chemical treatments (hot-water extraction, delignification, and hot-water extraction followed by delignification) was investigated by pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS). In each case, major GC-amenable condensable products were classified into several compound groups, and the formation of these monomer-related fragments from feedstock samples with varying mass portions of the structural constituents (cellulose, hemicelluloses, and lignin) were determined at 500 °C and 700 °C at hold times of 5 s and 20 s. The formation of pyrolysis products was shown to be characteristically…
Kinetic, isotherm and thermodynamic studies of the adsorption of methylene blue dye onto agro-based cellulosic materials
2015
AbstractThe purpose of this work is to establish the optimal experimental conditions for the removal of methylene blue (MB-as model basic dye) from aqueous solution by adsorption onto four agro-based materials, namely, cedar sawdust, pine sawdust, wheat straw, and Provence cane Arundo donax. Results show that an increase in acidity or ionic strength of the medium has generally a negative effect on the discoloration yield. From the data of pH effect, there is no need to change the initial pH of the MB solution to be treated. Equilibrium was reached after 20−30 min of agitation when cedar sawdust, pine sawdust, and Provence cane are used as adsorbents. However, in the case of wheat straw, an …
Gasification of pelletized renewable fuel for clean energy production
2011
Abstract The main aim of the study was to develop and investigate a small-scale experimental gasification technique for the effective thermal decomposition of pelletized renewable fuels (wood sawdust, wheat straw). The technical solution of the biomass gasifier for gasification of renewable fuels presents a downdraft gasifier with controllable additional heat energy supply to the biomass using the radial propane flame injection into the bottom part of the biomass layer. From the kinetic study of the mass conversion rate of pelletized biomass and variations of the composition of produced gas it is concluded that the process of biomass gasification is strongly influenced by the amount of addi…
Catalytic conversion of glucose to 5-hydroxymethylfurfural over biomass-based activated carbon catalyst
2020
Abstract Selective and efficient dehydration of glucose to 5-hydroxymethylfurfural (HMF) has been widely explored research problem recently, especially from the perspective of more sustainable heterogeneous catalysts. In this study, activated carbon was first produced from a lignocellulosic waste material, birch sawdust. Novel heterogeneous catalysts were then prepared from activated carbon by adding Lewis or Bronsted acid sites on the carbon surface. Prepared catalysts were used to convert glucose to HMF in biphasic water:THF system at 160 °C. The highest HMF yield and selectivity, 51% and 78%, respectively, were obtained in 8 h with a catalytic mixture containing both Lewis and Bronsted a…
Enzymatic water extraction of taxifolin from wood sawdust of Larix gmelini (Rupr.) Rupr. and evaluation of its antioxidant activity
2011
Abstract An enzyme incubation–water extraction (EI–WE) method was developed and optimised for the extraction of the natural antioxidant taxifolin and of the total flavonoids from wood sawdust of Larix gmelini ( Rupr. ) Rupr. A factorial design and a central composite design approach were used for method optimisation. Optimal conditions were 0.5 mg/ml cellulase and 0.5 mg/ml pectinase, a pH of 5.0, a temperature of 32 °C and 18 h incubation time. The flavonoids and taxifolin were extracted in hot water at 50 °C for 30 min, with a solid to liquid ratio of 1:20. Under optimised conditions, the yields of taxifolin and total flavonoids increased from 1.06 ± 0.08 to 1.35 ± 0.04 mg/g and 4.13 ± 0.…
Organic material dissolved during oxygen-alkali pulping of hot-water-extracted spruce sawdust
2016
Untreated and hot-water-extracted (HWE) Norway spruce (Picea abies) sawdust was cooked using the sulfur-free oxygen-alkali (OA) method under the following conditions: temperature, 170 °C; liquor-to-wood ratio, 5:1 L/kg; and NaOH charge, 19% on the oven-dry sawdust. In comparison with earlier studies conducted with birch sawdust, the spruce cooking yield data, together with the amount of the pulp rejects (78% to 86% for reference pulps from the initial feedstock and 73% to 83% for pulps from the HWE feedstock), revealed that the pretreatment stage prior to spruce OA pulping caused different effects on pulping performance. The analyses of the three main compound groups (i.e., lignin, volatile…
Sulfur-free pulping of hot-water-extracted spruce sawdust
2016
Softwood (Picea abies) sawdust was hot-water-extracted with two multi-phase processes (160-180°C, 100-280 min, and liquor-to-wood ratio 5 l/kg) corresponding to P-factors of ~780 (yield 80.0%) and ~4580 (yield 72.4%). The pre-treated materials were then pulped with the soda-AQ cooking (170°C, NaOH charge 20%, AQ charge 0.1%, 30-150 min, and liquor-to-wood ratio 5 l/kg), resulting in a yield range of 36.1-61.4% (for reference cooks without pre-extraction 47.9-60.0%). It was observed that the pre-extraction under moderate conditions enhanced the dissolution especially of large-molar-mass lignin during cooking, and the total amount of the dissolved lignin was also higher than that removed from…
Evaluation of the fuel potential of sewage sludge mixtures with beech sawdust and lignite
2018
Sewage sludge (SS) from municipal wastewater treatment has drawn serious attention of scientists around the world in the attempt to find feasible disposal methods. Therefore, in this work, a solution for valorisation of SS as solid fuel is proposed based on an advanced compositional investigation of SS versus conventional solid fuels, namely, lignite (L) and beech sawdust (BS). A characterisation in terms of proximate analysis and ultimate analysis was performed for the studied materials, both to SS, L, and BS as single fuel and to bi-component mixture formulas of SS and L/BS, in variable proportions of 30:70, 50:50, and 70:30. SS:BS based blends had higher hydrogen (from 4.43 wt. % to 5.14…