Search results for "Settling"
showing 10 items of 44 documents
Combination of the OSA process with thermal treatment at moderate temperature for excess sludge minimization
2019
Abstract This study investigated the chance to couple the conventional Oxic Settling Anaerobic (OSA) process with a thermic treatment at moderate temperature (35 °C). The maximum excess sludge reduction rate (80%) was achieved when the plant was operated under 3 h of hydraulic retention time (HRT). Compared with the conventional OSA system, the thermic treatment enabled a further improvement in excess sludge minimization of 35%. The observed yield coefficient decreased from 0.25 gTSS gCOD−1 to 0.10 gTSS gCOD−1 when the temperature in the anaerobic reactor was increased to 35 °C, despite the lower HRT (3 h vs 6 h). Moreover, the thermic treatment enabled the decrease of filamentous bacteria,…
Spatiotemporal Dispersal and Deposition of Fish Farm Wastes: A Model Study from Central Norway
2017
Abstract A spatially explicit coupled hydrodynamic-mass transport model system was used to simulate dispersal of particulate organic matter from Atlantic salmon (Salmo salar) farming in central Norway. Model setups of 32 m horizontal resolution were run for periods of up to 650 days for 3 sites of different oceanographic characteristics: one fjord location, one medium-exposed location influenced by fjord water and one coastal location. Records on feed used for each cage at each location were converted to feces released based on a published mass balance model. The results from the simulations were compared with scores from corresponding mandatory benthic surveys (MOM-B) of the sediment layer…
A Comparison Study of a Novel Self-Contained Electro-Hydraulic Cylinder versus a Conventional Valve-Controlled Actuator—Part 1: Motion Control
2019
This research paper presents the first part of a comparative analysis of a novel self-contained electro-hydraulic cylinder with passive load-holding capability against a state of the art, valve-controlled actuation system that is typically used in load-carrying applications. The study is carried out on a single-boom crane with focus on the control design and motion performance analysis. First, a model-based design approach is carried out to derive the control parameters for both actuation systems using experimentally validated models. The linear analysis shows that the new drive system has higher gain margin, allowing a considerably more aggressive closed-loop position controller. Several b…
Trace elements in natural metallic iron from Disko Island, Greenland
1986
The largest occurrence of natural metallic iron on Earth is on the island of Disko, Greenland. Metallic iron is found there in a variety of different types, from small metal particles in basalts to large meter-sized blocks. We have studied three different types of metallic iron: small metal spherules (< 300 μm) in basaltic magma; larger metal grains (300 μm-3 mm), often composed of aggregates of smaller particles, in similar host rocks; and massive iron lumps (up to several tons). Analytical data for 13 siderophile elements in samples from these three types are presented. All metals analysed have a distinctly crustal pattern of siderophile elements. High Co/Ni, Re/Ir or W/Ir ratios clearly …
Multiphase chemistry in a microphysical radiation fog model—A numerical study
1993
A microphysical radiation fog model is coupled with a detailed chemistry module to simulate chemical reactions in the gas phase and in fog water during a radiation fog event. In the chemical part of the model the microphysical particle spectrum is subdivided into three size classes corresponding to non-activated aerosol particles, small and large fog droplets. Chemical reactions in the liquid phase are separately calculated in the small and in the large droplet size class. The impact of the chemical constitution of activated aerosols on fogwater chemistry is considered in the model simulations. The mass transfer of chemical species between the gas phase and the two liquid phases is treated …
Kinetics of nitrogen removal in a MBR nutrient removal activated sludge system
2006
The application of membrane bioreactor (MBR) technology to biological nutrient removal (BNR) activated sludge (AS) systems is limited and uncertainty exists as to the impact of the conditions induced by the membranes on the biologically mediated processes of nutrient removal. Two main conditions associated with MBRs are (1) high total suspended solids (TSS) concentrations (8–20 g/L) and (2) different selection pressures due to biomass retention not being based on settleability, compared with conventional systems with secondary settling tanks (SSTs). Recently, Ramphao et al. [1] concluded that incorporating membranes in BNR AS makes a profound difference to the design of the system. Previous…
Packing technology, column bed structure and chromatographic performance of 1-2-μm non-porous silicas in high-performance liquid chromatography
1989
This work is aimed at further elucidating the aggregation behaviour of micron- and submicron-size non-porous silicas and the column performance of 1–2-μm C18 silicas in reversed-phase high-performance liquid chromatography of low-molecular weight compounds. It is demonstrated that highly ordered, dense, porous aggregates of such silica beads were obtained by gravity settling and centrifugation. The slurry techniques applied at constant flow-rate and a pressure up to 50 MPa provided less-ordered aggregates, but generated an acceptable performance of columns when 1–2-μm C18 silica beads were employed. To operate columns of 53 mm × 4.6 mm I.D., the maximum flow-rate needs to be ca. 2.5 ml/min …
UKIRT Observations of the Impact and Consequences of Comet Shoemaker–Levy 9 on Jupiter☆
1997
The observation of Comet Shoemaker-Levy 9's collision with Jupiter in July of 1994 by the United Kingdom Infrared Telescope (UKIRT) produced spectroscopic data of high quality. Analysis of the data for Impact C has produced the first temperature curve that covers such an event, from the first visibility of the plume above the limb through to the settling down of the ejected gas onto the upper jovian atmosphere. Temperatures derived from methane emission show that 5 min after impact, a plume some 6500 km across was heated to similar to 1400 K. At its maximum spatial extent similar to 12 min after impact, a region of Jupiter's atmosphere similar to 45,000 km west from the impact site of the m…
P-recovery in a pilot-scale struvite crystallisation reactor for source separated urine systems using seawater and magnesium chloride as magnesium so…
2019
[EN] Practical recovery of a non-renewable nutrient, such as phosphorus (P), is essential to support modern agriculture in the near future. The high P content of urine, makes it an attractive source for practicing the recovery of this crucial nutrient. This paper presents the experimental results at pilot-plant scale of struvite crystallisation from a source-separated urine stream using two different magnesium sources, namely magnesium chloride and seawater. The latter was chosen as sustainable option to perform P-recovery in coastal areas. Real seawater was used to assess in a more realistic way its efficiency to precipitate P as struvite, since its composition (with noticeable concentrati…
Particle drag coefficients in turbulent fluids
1998
Abstract An accurate estimation of particle settling velocities, and/or of particle drag coefficients, is required for modelling purposes in many industrially important multiphase processes involving the suspension of millimetre and sub-millimetre size particles in a liquid phase. It is known that the settling velocity of particles in a turbulent fluid may be significantly different from that in the still fluid, depending on turbulence and particle characteristics. Despite the wide range of processes that would benefit from a thorough understanding of this phenomenon, experimental data and reliable correlations are still lacking in the scientific literature, especially for the case of the a…